TranslateFramePositions read the stored pending frames, then parked the
project's own hero when the receiving copy lacked its photo (leaving no
hero chosen), and only then placed pending entries: a stale pending hero
whose photo the copy held became the hero again and the newer choice was
lost. When a hero is chosen, stored pending entries no longer carry the
hero flag (an entry left with nothing to place goes) before positions
are translated, so only the hero parked now may wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings synced between a PC and its server sequence were stored as they
came, in the other copy's frame order. When the inserted photos arrived
later (a download, an upload), the index moved those already-correct
positions a second time, so exclusions, the hero and camera keyframes
landed on other photos (V-21, CD-2).
- Settings are translated by photo (SHA-256, else size and capture time)
to the frames of the copy they go to: the server's before they are
compared or applied here, this PC's to the server's frames as its
manifest lists them before a push (SyncPositions).
- A position on a photo the receiving copy lacks waits in project.json as
a pending frame and takes its place when the photo arrives, on an
insertion or an append in step with the index; the Library's hero
frame follows. A hero chosen meanwhile wins, and advice does not fill
a hero while one waits. Old projects without the member are unchanged.
- Pushes send expectedFramesVersion; PATCH /api/v1/sequences/{id} answers
409 frames_conflict when the frames changed since, and the next
comparison translates again.
- A pulled payload equal to the local copy is settled without the
archive: an offline or read-only archive no longer fails the
comparison (V-10).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Services, sign-in entries and shortcuts are matched against the full paths of the files the install log or the
payload lists, never against everything under the install folder: an install into a shared folder such as D:\Apps
or /DIR="C:\Program Files" no longer stops, starts or deletes other vendors' services or removes their Run values.
The elevated step now takes the names the unelevated setup found (/SERVICES=... /NAMES=...) and reads each service
again, acting only when it still starts a program of the folder's log or of its own payload (or, for Prune, a
program of the folder that is gone).
Programs are asked to close before any service is touched. On uninstall the services are deleted only once the
programs have closed, just before the files go; a failed install or uninstall starts again the services it
stopped, and after an upgrade setup starts exactly the services it stopped, whatever their start type.
The Server component installs only for all users in a folder inside Program Files. In the window a custom folder
outside it is invalid while the Server is selected, with a tooltip saying why; silent mode refuses it. An upgrade
of an installation elsewhere cannot add the Server, and one it carried is dropped with its service.
Sign-in entries use StartupCommand (the same file as on fix/shell-notify) and are removed by
SetupRegistry.DeleteStartupEntries only when the client's or the Uploader's value starts a program the install log
lists; an upgrade that drops a program removes its entry too. StartupEntries is gone.
A shortcut that starts another product's existing copy is still left alone but now logged; uninstalling the
product it starts hands it to another product of the same scope that lists it and has the same program, so the
Uploader that stays keeps its shortcuts. Another registered Titano installation whose folder or log cannot be read
now counts as using every program's data, so "Remove my data" never offers it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Preview sizes come from probes and unscaled decodes: a size-limited decode
picks the smallest preview that reaches its edge (CR3 PRVW 1620x1080), so
renders and deep passes record its tier without a size and the output cap
keeps the largest preview's.
- A read error is not an undecodable file: ImageDecoder.Decode throws the
IOException when a provider could not read the file and none produced
pixels. Deep passes never flag frames they could not read or that
vanished, and frames only an interrupted earlier run found undecodable
are decoded again before they are flagged.
- Renders resolve stand-ins only for frames the pipeline asks for; frames
the read-ahead meets on the way (skipped by speed-ups) are left alone.
- A GoPro GPR finds its JPEG in the index when an import or upload kept it
in a sequence of its own (same original stem and capture time), for
probes, deep analysis, renders, thumbnails, proxies and the editor;
GPRs whose JPEG is indexed later are probed again.
- Thumbnails judge an embedded preview by its own JPEG header.
- PostgreSQL writes tier fields 1000 frames per statement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The client's HKCU Run value now counts as on only when it starts this executable, so a portable copy, a
second install or a development build no longer shows the box ticked, and starting one no longer rewrites the
entry to itself. Refresh only follows an entry whose program an update renamed in this copy's folder, and
unticking removes only this copy's entry. Portable copies keep the choice in memory and hide the Startup row,
since they leave nothing in the registry.
The uninstaller removes the client's and the Uploader's sign-in entries when they start a program of the folder
it removes. StartupCommand in Titano.Core holds the Run key, the value names and the command parsing shared by
both.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Loc.SetCulture stores the new culture before it raises CultureChanged, so the
guard's exception left the process in the other language until the offending
test's own cleanup ran, or for good, and the parallel classes asserting English
failed beside it. Both test programs now restore English first (the switch back
passes the guard) and then fail the test, naming it and the language it chose.
LanguageGuardTests runs a non-serial fixture through the runner and checks the
failure message, that English is back and that later listeners only hear of
English.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Setup registered .titano with Titano.exe "%1", but nothing wrote such a file
and Titano ignored the argument (BRIEF §18).
- Core ProjectBundle: versioned UTF-8 JSON ("titano-project", format 1) with
the archive (id, name, path), the sequence (id, folder, title, frame
count) and the project settings as project.json holds them; newer or
foreign files are refused, frame positions apply only to the frames they
were saved for, saving never replaces an earlier file.
- Data ProjectBundles: the file for a sequence of the index, and the sequence
a file names (by id, else the same folder of the same archive).
- Editor: "Save project file" on the Export tab (sequences of this PC's
archives); opening a file shows its sequence and applies the settings as
one undo step with an Undo toast, or says in one sentence why not (not in
the library, unreadable, a job runs).
- Titano.exe opens its file argument once the index is open and runs once
per data folder: a later launch hands its file over a current-user named
pipe, lets the running window come to the front and exits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Findings, advisor reasons and a few UI texts put a count before a plural noun
without plural forms, so English and Italian read "1 frames are black". Each
such key is now a plural stem (.one/.other) whose count is its first argument;
findings and reasons, which travel as data, resolve through the new Loc.Text,
which picks the form from that argument (a fraction takes "other"), so stored
deep reports and project reasons keep their keys and arguments. Texts with two
or more counts (job log lines, "frames with a capture time: 12 of 300") read as
labels, which agree with no number. A single exposure change gets its own
finding instead of "1 exposure changes, typically 0 frames apart".
The converted and reworded keys leave the 36 other catalogs until they are
translated again; the dead plain Shell.JobBar.Ready goes too. `i18n check` now
fails on an English text that counts a noun without plural forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings (UI-01, UI-02, UI-03, UI-09, RF-4):
- New Import, Analysis and Formats pages, in the order of Settings.html. Import holds
the defaults of new cards (session rules, subfolders, verification, duplicates,
after-import actions); Analysis the deep-analysis width cap, night and star-field
thresholds and deep analysis after import or scan; Formats the decode tier of every
format on this PC with a notice and Store install link per missing codec extension.
- Archive gains thumbnail size and rescan interval; its templates, proxy size and
thumbnail size are the open archive's own (archive.json) and new archives' defaults.
- Rendering quality, parallelism and background priority now drive the jobs: quality
maps to preparation size, read-ahead and default flow quality; parallelism sets the
engine's workers live and caps per-job threads; background priority raises the UI
thread while Titano is in front.
- Advanced gains Restore (daily backups, dry-run summary, destructive confirmation,
staged for the next start) and Reset all.
- The naming preview's sample title is a catalog string.
Engine (ENG-03, ENG-04, ENG-06):
- ArchiveService.GetSettingsAsync/UpdateSettingsAsync rewrite archive.json atomically
under a lease, then the index row; the server endpoint and the desktop use them, and
the desktop creates archives with Settings › Archive. ThumbnailPolicy in archive.json
sizes the thumbnails.
- DatabaseBackups: daily VACUUM INTO copies kept x3 on the desktop and on a server on
SQLite (DatabaseBackupService), staged restore checked and preceded by a fresh copy.
- Maintenance vacuums the SQLite index when 10 % or more is free (dry run reports it).
- JobEngine.SetWorkers; ProcessingOptions.Tune applies host tuning per job.
Archive setup toasts say why in a localized sentence (RF-1).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Four App tests switched the process-wide UI language inside parallel classes, so
another class's English assertion, or its constructor's reset to English, could
land in the middle of them; they now live in the serial ArchiveLanguageTests and
ImportLanguageTests. The App and Core test programs fail a test that leaves
English outside a serial class at the switch, through the new
TestContext.Current and TestContext.IsSerial.
The FrameWindow cancellation test counted unobserved task exceptions while other
classes ran beside it; it moves to the serial FrameWindowIsolationTests, and both
unobserved-exception tests drain the finalizer queue before they start counting.
The runner unwrapped TargetInvocationException only around the test method: a
skip or an assertion thrown by a test class constructor or field initializer was
reported as a failure reading "Exception has been thrown by the target of an
invocation". Constructors are unwrapped the same way now. TestRunner.Discover(Type)
and ExecuteAsync are public, so Tools.Tests checks the runner with nested fixtures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §8.2 tiers 2 and 3 had no writer: PreviewOnly and Undecodable were never set,
so the advisor could not cap the output at the preview size and one unreadable frame
failed a whole render.
- ImageDecoder.Probe names a file's tier without decoding it (JPEG, PNG and TIFF
without opening the file); the light analysis probes frames whose tier is unknown,
and the deep analysis, renders from originals and thumbnail/proxy passes record
what decoding actually found (FrameTiers). Sidecar frames gain "tier", "previewW"
and "previewH"; the index gains frames.preview_width/height and
sequences.preview_only_count (migration 0005, SQLite and PostgreSQL).
- SequenceContext takes the preview size from preview-only frames, so the advisor's
output cap applies; the light analysis reports format tiers (preview-only frames as
information, undecodable ones as a warning under the deep analysis' key, listed
once); a sequence that gains undecodable frames warns at once.
- Only a file in a format the host decodes natively is flagged undecodable; files
beyond the host's decoders keep their tier without the flag, so render nodes and
proxies can still supply them.
- A frame that stops decoding during a render is replaced by its nearest planned
neighbour and logged instead of failing the job; the render fails only when no
planned frame decodes.
- The Library card shows a preview-only chip with the count (local and server
sequences: SequenceDto.PreviewOnlyCount, FrameDto preview size).
- GoPro GPR decodes through the JPEG the camera writes beside it when that is larger
than the embedded preview (BRIEF §8.1).
- Thumbnails use a stored embedded preview only when it reaches 320 px; a smaller one
sends the frame through the host's decoders instead (BRIEF §8.5).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §9 lists exposure mode, intervalometer hints and sRaw flags among the MakerNote
fields; no vendor parser read them. The vendor exposure mode (Canon, Olympus,
Fujifilm, Panasonic, Sony) now fills ExposureProgram when Exif has none, Panasonic's
TimerRecording becomes FrameMetadata.IntervalShooting, and Canon's SRAWQuality and
Nikon's ImageSizeRAW / small NEF compression become FrameMetadata.RawSize. Nikon keeps
its interval-shooting state in the encrypted ShotInfo, which stays undecoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The project names frames by position (exclusions, hero, virtual-camera
keyframes), and an upload, import, scan or sync download of earlier photos
merges them by capture time and renumbers the frames after them; nothing
moved the project, so a render excluded the wrong photo and the project's
hero no longer matched the Library's.
project.json keeps its format: when the index takes a sidecar in which frames
were inserted before indexed ones, the index's copy of the project has its
positions moved from the indexed order to the new one in the same transaction
as the frame rows, and project.json mirrors it unless another writer changed
it meanwhile. The JSON is edited in place, so members a newer Titano wrote
survive; only an insertion is followed (if an indexed frame is gone, the
positions stay). The settings version stays, so a synced copy receiving the
same frames makes the same move (CD-2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The right-to-left separator broke the frame data over the preview, a left-to-right
island: after the localized time ("6:03:41 م") the shutter's number read as part
of the previous field and swapped places with the dot. Fields shown in such an
island now use Loc.IslandSeparator, with left-to-right marks in right-to-left
languages. Charts formatted text with the UI culture's digit substitution, so a
number after Arabic words came out in Arabic-Indic digits there only; they now
draw European digits like every text block. The direction marks in source are
written as escapes instead of invisible characters.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A language switch re-read computed properties only: the job bar of a running job,
the Jobs rows, the editor's chart legends and summaries, Auto chips, markers and
info line, the Archive figures and the Import session table kept the old language
until their next change. LocalizedViewModel gains OnLanguageChanged, where each of
them makes those texts again.
Meta lines joined their fields with a plain " · ": in Arabic or Hebrew a number
after a Latin field ("Canon EOS R5 · 2 h") joined the Latin run and split its own
field. Loc.Separator puts right-to-left marks around the dot in right-to-left
languages and is used for every such line. Desktop file sizes use the Common.Size
formats, as the Setup and the Uploader do.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- A secret value runs to the next ';' or the end of the line unless quoted
(backslash and doubled-quote escapes), so passwords with spaces, commas or
quotes never leak in part; URL passwords run to the last '@' before the path.
- Desktop bundles get " (2)", " (3)"… instead of overwriting one made in the
same minute, and a bundle that fails half-way deletes its .tmp file.
- The server builds its bundle in a temporary file that no crash leaves behind
(DeleteOnClose on Windows, unlinked at once elsewhere).
- Tests: passwords with spaces, commas, quotes and '@'; a DbConnectionString in
the server bundle; bundle name collisions and failure cleanup.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
An explicit null on a list or text member left it null and crashed renders
(batch, excluded frames). A null highlight knee was not written, so a rewrite
turned it back on. A member given twice threw ArgumentException past every
JsonException handler.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Moving them to Jobs.Analysis.* deleted keys that the integration branch
translates into every culture. The advisor resource test now covers the
Advisor.Log.* job lines, as on the integration branch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
SecretScrubber removes passwords, tokens, keys, cookies, authorisation
headers, URL credentials and private-key blocks from text and JSON;
DiagnosticsArchive zips reports, settings, failed jobs and log tails through
it. The desktop bundle (Settings > Advanced, About) now adds the codec and
encoder inventory, the settings and recent failed jobs; the server serves
the same as GET /api/v1/server/diagnostics (ManageArchive, audited), linked
from admin > Logs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The source-generated deserialiser sets every init-only member it does not
find to null/false/0, so a partial project (API edit, older file) lost its
sections and defaults. FromJson lays the JSON over the default project.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The decode workstream added a second pack writer and proxy builder that
wrote TTPK files with a different layout to the same path as the
archive's ThumbPack. The archive implementation is the one wired into
ingest, maintenance and the thumbnail jobs; the unused duplicates are
removed. The LRU ThumbnailCache stays for the UI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Card scanning (DCIM and flat), session splitting with test-shot merging and
user splits/merges, per-body import plans named by templates with archive
duplicate detection, hash-verified resumable copy with per-file errors, a
plain-folder destination and a verified card erase with dry run.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
archive.json and sequence.json with source-generated JSON, forward-compatible
reading (unknown fields kept, unknown enum names tolerated) and atomic writes;
lease files with expiry and stale takeover; thumbs.pack with index, crash-safe
append and random access; folder scanning, in-place adoption, reconcile,
verify, index snapshot, rename planning and thumbnail/proxy rendering.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Covers compression 34892 with a linearisation table (42.8 dB), Deflate
with the floating-point predictor for CFA and LinearRaw data,
CameraCalibration1 with AnalogBalance in the colour transform, and a
value-mapping opcode in OpcodeList3 applied to unbalanced values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Auto<T>.Resolve returned default instead of the fallback for value types
because AutoValue cannot be null there. Auto<T> now records HasAdvice;
the render pipeline's ProjectValues workaround and the advisor's
ReasonKey heuristic are removed.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Cross-checking synthetic files with LibRaw's dcraw_emu showed it reads
uncompressed RAF samples as little-endian words and unpacked data under
the Nikon compression tag as big-endian words shifted left by four; the
readers and test writers now do the same (CR2, lossless NEF, ARW2 and
PEF already decoded identically, ~86 dB). The default crop and the
final orientation step no longer copy a full frame when they change
nothing, lowering the 24 MP peak by two frame copies.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
diagnose prints per file the format, managed decode tier (and why it is
not native), delivered size, camera and capture time with its source,
then a per-format summary; --formats prints the tier table. fixtures
downloads tests/fixtures/manifest.json into tests/fixtures/external with
HTTP range resume and SHA-256 verification, skipping verified files and
recording the hash of first downloads whose manifest hash is null.
External fixture tests (skipped when absent) check native decoding,
size and agreement with the embedded preview.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Frames are independent, so up to one per core is encoded at once with
single-threaded codecs; PNG sequences no longer run Deflate on one core
(1080p PNG export 1.0 to 2.5 fps on 4 cores). Failures surface on a later
frame or on Complete, and discarding waits for every write first.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
FrameWindow keeps frames from position-Behind to position+Ahead,
decodes ahead on background tasks within the memory budget, drops
frames that leave the window and spills in-window frames farthest from
the position to a delete-on-close temp file of float32 planes (renders
stay bit-identical under memory pressure). The budget check and load
start share one lock; leases pin frames; disposal waits for decodes,
releases every buffer and deletes the spill file even after
cancellation. Tests assert a hard three-frame bound for 40 and 400
frames and an identical spill-file size.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
ThumbnailPack appends self-describing CRC-checked JPEG entries (320 px,
q80) and index records; a two-slot header flips to each new index, so
crashes and truncation lose only the damaged tail, and compaction
rewrites live entries through AtomicFile. Reads are positional and run
concurrently with the writer. ThumbnailCache is a byte-budget LRU that
coalesces concurrent loads. ProxyBuilder decodes at the policy long
edge with orientation applied and writes JPEG q92 with the source Exif
(capture time kept, orientation reset).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
ManagedDecoderProvider decodes JPEG/PNG/TIFF natively, DNG and the
supported RAWs through RawDecoder, and falls back to the largest
suitable embedded JPEG (oriented like the main image) for other RAWs,
CR3, HEIF and unsupported bodies. Requests use JPEG DCT scaling, CFA
binning when MaxLongEdge allows, bilinear demosaic for thumbnails and
analysis, and ForcePreview. DecoderFactory builds the client (WIC then
managed) and server chains and the per-format tier table; Probe gives
the per-file tier without decoding.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
63 reusable checks (plan, export, encoder selection, codec round trips,
renders into every managed format decoded back, MP4 inspection when a
platform encoder is supplied, processing modules measured on rendered
frames, cancellation, failures, determinism, memory) shared by the CLI
and the desktop Settings page.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Each container reader builds a RawFrame for the shared pipeline: CR2
sliced lossless JPEG with SensorInfo crop, masked-column black and
ColorData WB; NEF uncompressed and Nikon Huffman (lossy type 1,
lossless, lossy type 2 incl. split); ARW uncompressed and ARW2 cRAW
with tone curve; PEF uncompressed and Pentax Huffman; RAF uncompressed
Bayer and X-Trans with FujiIFD. Colour comes from a dcraw adobe_coeff
matrix table; bodies without an entry are reported unsupported so the
caller uses the embedded preview. Native RAWs detect the sensor's
saturation level for clipping only, never rescaling per frame.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC