Positions crossing copies could still land on other photos in three
windows:
- A push translated a row snapshot's settings against local frames
listed later, after a manifest round trip: an import of earlier photos
meanwhile moved the row's positions, and the server stored shifted
exclusions, hero and keyframes. SyncPositions now reads this copy's
row with its frames as one state (frames listed between two reads of
the row at the same frames version) and translates that row's
settings, at the settings version being pushed. The conflict
comparison and ApplyLocallyAsync compare against that same row. When
the copy was edited since, or its frames keep changing, nothing is
sent or applied and the next comparison translates again (Keep mine
reports a changed conflict; PushAll sends an edit saved meanwhile).
- The manifest read the sequence row, then paged its frames: an upload
committed in between paired settings of one frames version with
frames of the next. The server now lists them again while the frames
version moved during the listing, then inside a transaction holding
the row (on SQLite, on that transaction's connection, so no second
pooled connection waits behind the write lock). The client also
refuses to translate against a manifest whose frames are not each
listed once at 0..n-1.
- Server capture times were fetched only when something was unhashed,
so the same parked photo was written with or without capturedAt. They
are now fetched whenever the two frame lists differ; an equal project
then compares equal, and an entry can be placed on a photo that
arrives unhashed.
CompareOriginals counted unhashed server frames one-to-one against this
PC's photos, so two copies of one photo in a folder the server adopted
left Download on offer forever while the download fetched nothing. A
photo on either side is now there when any photo of the other side
matches it, as downloads and uploads find them. Paged frame listings
keep each frame once (an insertion between pages lists one again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
TranslateFramePositions read the stored pending frames, then parked the
project's own hero when the receiving copy lacked its photo (leaving no
hero chosen), and only then placed pending entries: a stale pending hero
whose photo the copy held became the hero again and the newer choice was
lost. When a hero is chosen, stored pending entries no longer carry the
hero flag (an entry left with nothing to place goes) before positions
are translated, so only the hero parked now may wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
ArchiveIndexer.SyncAsync and the ingest's in-step append (and the first
frame of an API sequence) read the sequence row and upsert the whole row
from that read in one transaction. On PostgreSQL (READ COMMITTED) a
PATCH accepted between the read and the upsert was written back over:
its settings were lost and settings_version went back, so the PC that
pushed them later pulled the old settings over its edit.
The row is now read with SequenceRepository.GetForUpdateAsync (FOR
UPDATE, as EditAsync takes it). A PATCH committed first is then moved by
the insertion like any position; one arriving later sees the new frames
version and gets 409 frames_conflict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A proxy download caches a frame's thumbnail under its proxy name while
the server has no proxy of it (HEIF until a client or render node sends
one). The cache did not record which it was, so the thumbnail stayed
there for good after the server's proxies arrived (V-29).
- remote.json records each cached file's kind (proxy or thumbnail); a
later proxy download replaces thumbnails, and files of caches written
before kinds were kept, once the server offers the frame's proxy.
- A cache filled with thumbnails while the server had no proxies counts
as stale, so offline caches are fetched again when the proxies arrive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A folder the server adopted and never verified lists no SHA-256. A
download of such a sequence failed ("did not arrive intact") because
every unhashed frame collapsed into one wanted entry and the empty hash
was refused, and desktops never sent the proxies the server asked for
those frames (V-9).
- Each unhashed server original is fetched by frame id into staging,
accepted on its size (two attempts, resumed with Range) and hashed
here; the archive ingest files it by that hash like any other.
- Server frames without a hash are matched to this PC's originals by
size and capture time: they are not downloaded twice, not uploaded
again, counted right in the comparison (each frame on its own), and
their wanted proxies are counted and sent from the matching original.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings synced between a PC and its server sequence were stored as they
came, in the other copy's frame order. When the inserted photos arrived
later (a download, an upload), the index moved those already-correct
positions a second time, so exclusions, the hero and camera keyframes
landed on other photos (V-21, CD-2).
- Settings are translated by photo (SHA-256, else size and capture time)
to the frames of the copy they go to: the server's before they are
compared or applied here, this PC's to the server's frames as its
manifest lists them before a push (SyncPositions).
- A position on a photo the receiving copy lacks waits in project.json as
a pending frame and takes its place when the photo arrives, on an
insertion or an append in step with the index; the Library's hero
frame follows. A hero chosen meanwhile wins, and advice does not fill
a hero while one waits. Old projects without the member are unchanged.
- Pushes send expectedFramesVersion; PATCH /api/v1/sequences/{id} answers
409 frames_conflict when the frames changed since, and the next
comparison translates again.
- A pulled payload equal to the local copy is settled without the
archive: an offline or read-only archive no longer fails the
comparison (V-10).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- The server's diagnostics bundle lists the SQLite compile options next to the database line when the index is
SQLite (BRIEF §6.2), as the desktop bundle does; before, they reached only one early log line.
- A deep analysis resumed after an interrupted run decodes the frames that run found unreadable again to confirm
them; a frame read from its proxy is now skipped, so the proxy's tier is never recorded as the original's.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The running Titano listens for later launches as soon as it holds its data folder's mutex and keeps what arrives
until the window can take it, so a double-clicked .titano during a slow start is opened instead of dropped after
3 s. When the main window closes it stops listening (the mutex stays until the services have stopped), so a later
launch gets no answer and, instead of exiting, waits up to 30 s for the closing instance to exit and starts in its
place with the file. A mutex created by a Titano running with administrator rights no longer crashes a normal
launch: it counts as another instance and the launch exits quietly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Services, sign-in entries and shortcuts are matched against the full paths of the files the install log or the
payload lists, never against everything under the install folder: an install into a shared folder such as D:\Apps
or /DIR="C:\Program Files" no longer stops, starts or deletes other vendors' services or removes their Run values.
The elevated step now takes the names the unelevated setup found (/SERVICES=... /NAMES=...) and reads each service
again, acting only when it still starts a program of the folder's log or of its own payload (or, for Prune, a
program of the folder that is gone).
Programs are asked to close before any service is touched. On uninstall the services are deleted only once the
programs have closed, just before the files go; a failed install or uninstall starts again the services it
stopped, and after an upgrade setup starts exactly the services it stopped, whatever their start type.
The Server component installs only for all users in a folder inside Program Files. In the window a custom folder
outside it is invalid while the Server is selected, with a tooltip saying why; silent mode refuses it. An upgrade
of an installation elsewhere cannot add the Server, and one it carried is dropped with its service.
Sign-in entries use StartupCommand (the same file as on fix/shell-notify) and are removed by
SetupRegistry.DeleteStartupEntries only when the client's or the Uploader's value starts a program the install log
lists; an upgrade that drops a program removes its entry too. StartupEntries is gone.
A shortcut that starts another product's existing copy is still left alone but now logged; uninstalling the
product it starts hands it to another product of the same scope that lists it and has the same program, so the
Uploader that stays keeps its shortcuts. Another registered Titano installation whose folder or log cannot be read
now counts as using every program's data, so "Remove my data" never offers it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Any failure of the informational PRAGMA compile_options probe is logged
and gives an empty list; before, anything but a SqliteException was cached
by the lazy value and rethrown by every later open.
Tests now cover the decode-tier fields end to end: the Library's
preview-only chip and its plural tooltip, server cards and frames carrying
previewOnlyCount and the preview size over the API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Preview sizes come from probes and unscaled decodes: a size-limited decode
picks the smallest preview that reaches its edge (CR3 PRVW 1620x1080), so
renders and deep passes record its tier without a size and the output cap
keeps the largest preview's.
- A read error is not an undecodable file: ImageDecoder.Decode throws the
IOException when a provider could not read the file and none produced
pixels. Deep passes never flag frames they could not read or that
vanished, and frames only an interrupted earlier run found undecodable
are decoded again before they are flagged.
- Renders resolve stand-ins only for frames the pipeline asks for; frames
the read-ahead meets on the way (skipped by speed-ups) are left alone.
- A GoPro GPR finds its JPEG in the index when an import or upload kept it
in a sequence of its own (same original stem and capture time), for
probes, deep analysis, renders, thumbnails, proxies and the editor;
GPRs whose JPEG is indexed later are probed again.
- Thumbnails judge an embedded preview by its own JPEG header.
- PostgreSQL writes tier fields 1000 frames per statement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The MakerNote interval-shooting hint (Panasonic TimerRecording) is kept as
FrameFlags.Intervalometer from indexing on, so it reaches the sidecar, the
index, sync and the protocol. When most frames carry it, gaps in the
cadence are the intervalometer's deliberate pauses and the advisor picks
adaptive timing (Advisor.Reason.Timing.Intervalometer, BRIEF §10.3).
Frames both analyses find undecodable are now one finding over the union
of both lists at the higher severity: the deep pass also lists missing,
corrupt and beyond-this-host frames, which the light analysis never flags.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The restore dialog's two summary lines count sequences and photos in one sentence, which a plural key cannot
express: they read "Backup: sequences 12, photos 3,400". Reset all returns the sign-in entry, kept in the
registry rather than in the settings file, to its default (off) too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- The archive's index row is written under the same lease as archive.json, so two edits cannot leave them in
opposite orders.
- A scanner holding the restore check's scratch copy no longer turns a passed check into a failure.
- Night frames and Star fields say "Enter a number" instead of "Enter a whole number".
- Folder and server sources start with Keep and no eject whatever Settings › Import says for cards.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Texts that count with participles or adjectives still put a bare number in
front of a word that agrees with it in Italian, so one failure read "1 non
riuscite": the import result and its Done toast, the archive health line and
the thumbnail and import job log lines. They now read as labels in English and
Italian ("Copied: 40 · failed: 1"), like the scan and verify log lines; their
old translations leave the other 36 catalogs until the next translation pass.
The uploader's progress keeps the mockup's English and uses labels in Italian,
and the admin dashboard's upload total no longer agrees with the number.
`i18n check` now also fails on an English text that tallies two or more counts
with participles or adjectives. A single "{0} failed" is left alone, since the
placeholder there is as often a name or a size as a count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Editor: a failed save showed what the server or the archive layer would say
for the exception's type, so the editor's own sentences were lost: frames
changed on the server or settings changed elsewhere read "The server does not
answer", a read-only account or a gone sequence "Something went wrong". These
failures are now EditorException (an IOException; ProxiesOutdatedException
derives from it) and the toast shows their sentence as it is. A project
written by a newer Titano is reported with the same sentence as a corrupt one
instead of the parser's English text.
- Library: a job posted to a server whose certificate changed since sign-in
threw out of the action unreported; the pin's refusal now reaches the error
toast ("The certificate was not trusted").
- Archive: picking another archive forced it offline until it was read, so the
rebuild dialog called it offline with the previous archive's count, and
disabled commands said the archive must be online. What was read is now kept
apart from availability: until the picked archive is read, Rebuild and the
online commands wait and say so, health fixes and search results of the
previous archive are cleared, and a running search is cancelled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Windows data folder: the folder and everything in it must belong to SYSTEM,
Administrators or the server's account and hold no link, checked before the
ACL is rewritten; otherwise the server stops and names the entry. server.json
is read only after its owner is checked on the open handle. Secrets are
deleted and created anew with the private ACL, so a planted file's owner
loses its rights.
- Windows archive: a folder the server creates is changeable only by those
accounts (users may read it) and a .titano folder it creates is private; an
existing archive others can change is logged as a warning at start.
- Proxy mode: only loopback is trusted by default, since LAN clients reach the
HTTP port from private addresses; a cookie sign-in that did not come through
a trusted proxy over HTTPS answers proxy_untrusted, naming
TITANO_TRUSTED_PROXIES.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A mass rename moved the folders of nested sequences while holding only the
lease of the sequence whose folder moved, so an ingest, an editor save or a
thumbnail pass of a nested sequence kept writing in the folder as it moved: on
Windows the move failed and left the rename pending; elsewhere the writer
recreated the old folder and the nested step then failed. A moving step now
takes the sequence lease, then the thumbnail lease, of itself and of every
sequence it carries, by id, checks them all before anything moves, and
records the carried sequences' sidecars and index rows before letting go, so
they are journaled together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Wanted proxies were matched to this PC's originals by SHA-256 only, and
frames adopted from a folder stay unhashed until verified. A desktop that
uploaded an adopted HEIC folder counted none of the proxies the server asked
for, showed the link in sync and sent none of them. The upload now keeps the
hash it computes for each original the index has none for and makes the
proxies from those too; the comparison counts a wanted frame no hash matched
against an unhashed original this PC reads by size (the server names its copy
by its own template, so not by name).
The wanted count was recomputed only when frame or render counters moved, so
proxies a render node sent left the row "Local ahead" with an upload that
sent nothing, and proxies the server started asking for later were never
counted. A link whose copy may make proxies for the server now keeps the
server's update time of the last comparison (sync_links.diff_remote_updated_at,
migration 0006) and is compared again when it moved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Earlier versions made the server's proxies of HEIF frames from their embedded
previews. Those carry the frame's capture time, so the proxy pass kept them
and the sequence stayed marked as having all its proxies; renders and
analysis then read thumbnail-sized files and no client or render node was
asked for a real one. The proxy pass now treats a proxy whose long edge falls
short of the policy's for the frame (its own size when smaller, a tenth of
slack, frames of unknown size not judged) as stale, and the server refuses
such a proxy when one is sent (422 proxy_too_small).
PUT /api/v1/frames/{id}/proxy also took a proxy of a frame the server
decodes itself, replacing its own proxy with any JPEG of the right capture
time; it now answers 422 proxy_not_wanted for those and for frames missing or
damaged. Its follow-up jobs are queued even when the sender disconnects once
the proxy is filed.
A render node cleared the server's Undecodable flag on every frame, so a
damaged frame the server's own render skips was downloaded and failed the
node's job. Only a format the server cannot decode and the node can loses the
flag now; other undecodable originals are neither fetched nor rendered unless
read from their proxy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Index restore (ENG-06, UI-09):
- A staged restore now runs on the files before the index is opened, so it also
recovers an index that no longer opens; Settings > Advanced > Restore works
without an open index (the current one is shown as unreadable).
- The staged copy passes PRAGMA quick_check (before migration, in a scratch copy)
ahead of any backup: a damaged copy is set aside as .failed and never renews the
daily copies. The index it replaces is kept as a VACUUM INTO copy, or, when it
cannot be read, copied whole with its WAL as titano-replaced-<stamp>.db outside the
rotation. The staged file is renamed over the index, so it is never applied twice.
- Archive > Maintenance gains Restore database..., which opens Settings > Advanced.
Archive settings (UI-03, ENG-03):
- An archive.json with an empty or overlong name (drive roots) can be edited again:
the name read is made usable as at creation.
- Proxy and thumbnail sizes outside the presets (an admin's 3840) are listed and
shown with their number.
- Changing the archive folder retargets the rows: an archive there is registered
and rescanned; with none, the rows edit only the defaults of new archives. The
rows never fall back to another archive of the index.
- Reset all and Import settings no longer rewrite the shared archive.json; Archive >
Reset section asks first, naming the archive.
- PUT /api/v1/archive/settings: 409 archive_busy on a lease conflict, 409
archive_manifest for a damaged, newer or foreign archive.json (was 500).
Parallelism (UI-02):
- Auto is the job engine's default, half the logical cores (BRIEF 14.6), with each
job's own decode and analysis threads; a value the user sets is the number of
workers and caps those threads. The memory budget is shared: each job's frame
window gets budget / workers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The server publishes one account's card progress at most once a second
(sooner reports are taken and dropped) and at most 120 card events of an
account a minute (429 rate_limited beyond), so an upload-only account
can no longer push job and sequence events out of every client's queue.
On the client, the end of a card import waits at most two seconds for
its reports to reach the server, then cancels whatever is still on its
way, so a cancelled import or one that lost its server ends at once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Reconcile and a scan that finds a sidecar with other frames than the
index now read the sidecar and index it while holding the sequence lease,
the one an editor holds while it saves its project. The save then either
lands before the move, which moves its positions, or reads the moved
settings and merges onto them; a save made in between can no longer
write positions of the old frame order back without a version conflict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A re-upload that repairs a missing or damaged frame is now reported as
IngestResult.Repaired and adds nothing to the uploader's used bytes; the
quota checks at start and completion skip uploads whose target sequence
already holds the content. The start shortcut and crash recovery share
one rule (UploadRules.StandIn): an intact copy stands for the upload, the
target sequence's own copy first, except when the target holds the
content only in damaged copies, which the upload's bytes then repair.
A sequence adopted at the archive root that holds frames is never given
a new folder when its root sidecar is missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Toast.RunsFromNotification: a click on a Windows notification restores the window and runs the toast's
action only when the toast opts in (card detected: Import; interrupted import: Resume; job finished: Open;
navigation to Import or Jobs) and it is the only notification shown since the icon appeared. Cancel, Undo
and Retry stay in the window, and the notification text no longer offers them.
- Job endings are coalesced: finished jobs of one kind wait until no job of that kind the user waits for is
queued or running, then one toast says how many finished ("12 jobs finished", action Jobs); failures of one
update share one toast. Server > Upload all no longer raises one toast and one notification per sequence.
- Every failure that is not upkeep (scan, thumbnails, proxies, light analysis) is announced, including move,
adopt and user downloads; finished moves and adoptions are announced too.
- Rail badges: Library counts the sequences with warnings (the Warnings filter), refreshed after analyses;
Archive counts the index health lines that need attention.
- Tests: the balloon click path, the --minimized restore to a saved maximised window, batch and failure
coalescing, and the new badges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The client's HKCU Run value now counts as on only when it starts this executable, so a portable copy, a
second install or a development build no longer shows the box ticked, and starting one no longer rewrites the
entry to itself. Refresh only follows an entry whose program an update renamed in this copy's folder, and
unticking removes only this copy's entry. Portable copies keep the choice in memory and hide the Startup row,
since they leave nothing in the registry.
The uninstaller removes the client's and the Uploader's sign-in entries when they start a program of the folder
it removes. StartupCommand in Titano.Core holds the Run key, the value names and the command parsing shared by
both.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A screenshot without a baseline only warned, so with no baseline committed every
screen was "new" and the CI step could not fail, and a screen added after the
first baselines could stay ungated for good. Now the baseline folder is armed as
soon as it holds a PNG: from then on a screen without its own baseline fails
(Verdict.Unbased, an error annotation). Before the first baselines the run says
plainly, in its warning and in bold in the job summary, that it compared nothing
and that no visual change can fail it.
The baselines README explains why the existing ci-screenshots pictures cannot
serve (captured before the clock was fixed: times and dates follow the capture
moment) and how the first set is accepted from the first green windows-latest
run of the reproducible capture.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Setup registered .titano with Titano.exe "%1", but nothing wrote such a file
and Titano ignored the argument (BRIEF §18).
- Core ProjectBundle: versioned UTF-8 JSON ("titano-project", format 1) with
the archive (id, name, path), the sequence (id, folder, title, frame
count) and the project settings as project.json holds them; newer or
foreign files are refused, frame positions apply only to the frames they
were saved for, saving never replaces an earlier file.
- Data ProjectBundles: the file for a sequence of the index, and the sequence
a file names (by id, else the same folder of the same archive).
- Editor: "Save project file" on the Export tab (sequences of this PC's
archives); opening a file shows its sequence and applies the settings as
one undo step with an Undo toast, or says in one sentence why not (not in
the library, unreadable, a job runs).
- Titano.exe opens its file argument once the index is open and runs once
per data folder: a later launch hands its file over a current-user named
pipe, lets the running window come to the front and exits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Windows services whose program lies in the install folder (Titano.Server
--install-service) are found in the registry and, through the Service
Control Manager, stopped before files are replaced (they join the
"programs running" prompt), started again after an upgrade that stopped
them, deleted when an upgrade drops their program and on uninstall. An
unelevated setup runs that step in an elevated copy (/SERVICES=...).
- The Server component installs for all users only (manifest allUsersOnly):
choosing it moves a new install to Program Files and disables "Just me"
with the reason; a per-user install cannot take it.
- Uninstall removes every HKCU Run value that starts a program in the folder
(the Uploader's "Start with Windows").
- A shortcut that already starts an existing program elsewhere is neither
retargeted nor logged, and a logged shortcut is deleted only while it
still starts a program of this folder, so the two products no longer
remove each other's "Titano Uploader" shortcuts.
- "Remove my data" lists and deletes only the data of this product's
programs that no other installed Titano product uses (the desktop app and
the Uploader share %LOCALAPPDATA%\Titano and its logs folder).
- The .titano file type is named in setup's language (Setup.FileType.*).
Setup tests run in Titano.App.Tests on Windows CI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The fallback tested the builder's length, which the title line already made
non-zero, so release.yml (always --title) published notes that were only a
heading when a release held chore, ci, test or refactor commits alone. The
fallback now depends on whether a section or breaking entry was written.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Archive: picking another archive while the screen was reading kept the old
archive's tree and figures while Scan, Verify and the set actions targeted the
new one, and reloads asked for during a read were dropped. A load requested
during a read now runs once more after it, a read whose archive is no longer
picked shows nothing, and a new pick clears the tree and the online state
until the picked archive is read.
- Import: a job that ended before the screen recorded its id (a destination
gone offline) left the screen copying forever; its state is read back once.
A replaced import result is disposed, so it no longer stays alive through the
language event with its whole plan.
- Library: the timeline's month readouts are made again on a language switch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Findings, advisor reasons and a few UI texts put a count before a plural noun
without plural forms, so English and Italian read "1 frames are black". Each
such key is now a plural stem (.one/.other) whose count is its first argument;
findings and reasons, which travel as data, resolve through the new Loc.Text,
which picks the form from that argument (a fraction takes "other"), so stored
deep reports and project reasons keep their keys and arguments. Texts with two
or more counts (job log lines, "frames with a capture time: 12 of 300") read as
labels, which agree with no number. A single exposure change gets its own
finding instead of "1 exposure changes, typically 0 frames apart".
The converted and reworded keys leave the 36 other catalogs until they are
translated again; the dead plain Shell.JobBar.Ready goes too. `i18n check` now
fails on an English text that counts a noun without plural forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Error toasts showed the exception's own message, often technical English from
.NET or the OS, under a translated title. The editor's failed save, a job posted
to the server from the Library, and the card check or delete after an import now
say why in one catalog sentence: what the server answered or that it does not
answer, that the card left, is locked or a file could not be read, and the
archive causes of ArchiveFailures for a local save. The details stay in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings (UI-01, UI-02, UI-03, UI-09, RF-4):
- New Import, Analysis and Formats pages, in the order of Settings.html. Import holds
the defaults of new cards (session rules, subfolders, verification, duplicates,
after-import actions); Analysis the deep-analysis width cap, night and star-field
thresholds and deep analysis after import or scan; Formats the decode tier of every
format on this PC with a notice and Store install link per missing codec extension.
- Archive gains thumbnail size and rescan interval; its templates, proxy size and
thumbnail size are the open archive's own (archive.json) and new archives' defaults.
- Rendering quality, parallelism and background priority now drive the jobs: quality
maps to preparation size, read-ahead and default flow quality; parallelism sets the
engine's workers live and caps per-job threads; background priority raises the UI
thread while Titano is in front.
- Advanced gains Restore (daily backups, dry-run summary, destructive confirmation,
staged for the next start) and Reset all.
- The naming preview's sample title is a catalog string.
Engine (ENG-03, ENG-04, ENG-06):
- ArchiveService.GetSettingsAsync/UpdateSettingsAsync rewrite archive.json atomically
under a lease, then the index row; the server endpoint and the desktop use them, and
the desktop creates archives with Settings › Archive. ThumbnailPolicy in archive.json
sizes the thumbnails.
- DatabaseBackups: daily VACUUM INTO copies kept x3 on the desktop and on a server on
SQLite (DatabaseBackupService), staged restore checked and preceded by a fresh copy.
- Maintenance vacuums the SQLite index when 10 % or more is free (dry run reports it).
- JobEngine.SetWorkers; ProcessingOptions.Tune applies host tuning per job.
Archive setup toasts say why in a localized sentence (RF-1).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §20.2 asks for visual regression of the --capture screenshots with a
pixel-diff tolerance; CI only published them. `Titano.Tools screenshots diff
<dir>` compares every PNG with tests/visual/baselines: a pixel differs when a
channel moves by more than --tolerance (8 of 255), and a screen fails when more
than --max-diff of its pixels differ (0.05 %), when its size changed or when a
baseline lost its screen; a screen without a baseline only warns. It writes a
diff image per screen with differing pixels (the baseline faded, the differences
magenta) and a Markdown summary, also to the GitHub job summary.
`screenshots accept <dir>` copies screenshots over the baselines. The baselines
folder starts with its README; the pictures come later from ci-screenshots.
The captures were not reproducible: the sample's jobs, renders, transfers,
cards, trash and remote sequences were dated from the clock, the Library
timeline and the Archive heatmap laid out around today, the Uploader captured
in the computer's language and an indeterminate bar animated. The sample now
dates everything from SampleData.Now, --capture freezes the new AppClock there,
formats are English, and the new Motion attached property (off in the captured
windows) keeps the indeterminate sweep still in the middle.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The server decodes with managed decoders only, so HEIF originals had no
proxies, thumbnails from their small previews and no pixels for analysis or
managed renders, and nothing could send it proxies (ENG-05). Manifests now
carry the archive's proxy spec and, per frame, its flags and whether the
server wants its proxy. PUT /api/v1/frames/{id}/proxy (Edit or RenderNode)
stores a JPEG of at most 64 MiB that decodes and whose Exif capture time is
the frame's, then queues thumbnails and the proxy pass. An upload from the
desktop makes and sends the wanted proxies after the originals and counts
them as local changes; a render node sends those it can make from the
originals it fetched once the job is done. The server never makes such a
proxy from a preview, drops one left by a renumbered frame, takes thumbnails
from a proxy, and analyses and renders those frames from their proxies.
Render nodes fetched every frame of the manifest: frames missing, corrupt or
excluded on the server failed the download, and originals not hashed yet
failed the SHA-256 check (ENG-07). Nodes now skip those frames, fetch unhashed
originals into the job folder with a size check, judge decodability with their
own decoders, and use the proxy of a frame they cannot decode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The server indexed only what arrived through its own uploads, so photos
already in an adopted folder and sequences another writer added stayed
unknown until an administrator asked for a rescan. ArchivePolling, registered
by the archive module, queues an incremental scan of the online archive at
start and every ten minutes at background priority, unless a scan or rebuild
of it is waiting, running or paused (ENG-13).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §8.2 tiers 2 and 3 had no writer: PreviewOnly and Undecodable were never set,
so the advisor could not cap the output at the preview size and one unreadable frame
failed a whole render.
- ImageDecoder.Probe names a file's tier without decoding it (JPEG, PNG and TIFF
without opening the file); the light analysis probes frames whose tier is unknown,
and the deep analysis, renders from originals and thumbnail/proxy passes record
what decoding actually found (FrameTiers). Sidecar frames gain "tier", "previewW"
and "previewH"; the index gains frames.preview_width/height and
sequences.preview_only_count (migration 0005, SQLite and PostgreSQL).
- SequenceContext takes the preview size from preview-only frames, so the advisor's
output cap applies; the light analysis reports format tiers (preview-only frames as
information, undecodable ones as a warning under the deep analysis' key, listed
once); a sequence that gains undecodable frames warns at once.
- Only a file in a format the host decodes natively is flagged undecodable; files
beyond the host's decoders keep their tier without the flag, so render nodes and
proxies can still supply them.
- A frame that stops decoding during a render is replaced by its nearest planned
neighbour and logged instead of failing the job; the render fails only when no
planned frame decodes.
- The Library card shows a preview-only chip with the count (local and server
sequences: SequenceDto.PreviewOnlyCount, FrameDto preview size).
- GoPro GPR decodes through the JPEG the camera writes beside it when that is larger
than the embedded preview (BRIEF §8.1).
- Thumbnails use a stored embedded preview only when it reaches 320 px; a smaller one
sends the frame through the host's decoders instead (BRIEF §8.5).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A download whose .part already held the whole original (the job stopped while
hashing it) or more asked the server to resume past the end, got 416 and
failed on every retry; such a part is now hashed again, and one the server
cannot resume starts over (CD-1).
Auto-sync pulled the server's settings with the copy of the sequence read when
the comparison began, so an edit saved on this PC meanwhile was overwritten
unseen. The payload is now applied in one step under the sequence lease and
only while the local settings version is the one read; otherwise nothing is
written and the change is settled as a conflict (CD-3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §6.2 asks for the probe at startup. The options are read once per process
from an in-memory connection, logged with the library version and added to the
desktop diagnostics bundle; nothing depends on them (no FTS or JSON use).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §9 lists exposure mode, intervalometer hints and sRaw flags among the MakerNote
fields; no vendor parser read them. The vendor exposure mode (Canon, Olympus,
Fujifilm, Panasonic, Sony) now fills ExposureProgram when Exif has none, Panasonic's
TimerRecording becomes FrameMetadata.IntervalShooting, and Canon's SRAWQuality and
Nikon's ImageSizeRAW / small NEF compression become FrameMetadata.RawSize. Nikon keeps
its interval-shooting state in the encrypted ShotInfo, which stays undecoded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Both 0003_server_uploads.sql files still pointed at the 0005 names they had before
the migrations were renumbered without gaps. Comment-only: migrations are keyed by
version, not by content.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC