Any failure of the informational PRAGMA compile_options probe is logged
and gives an empty list; before, anything but a SqliteException was cached
by the lazy value and rethrown by every later open.
Tests now cover the decode-tier fields end to end: the Library's
preview-only chip and its plural tooltip, server cards and frames carrying
previewOnlyCount and the preview size over the API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Preview sizes come from probes and unscaled decodes: a size-limited decode
picks the smallest preview that reaches its edge (CR3 PRVW 1620x1080), so
renders and deep passes record its tier without a size and the output cap
keeps the largest preview's.
- A read error is not an undecodable file: ImageDecoder.Decode throws the
IOException when a provider could not read the file and none produced
pixels. Deep passes never flag frames they could not read or that
vanished, and frames only an interrupted earlier run found undecodable
are decoded again before they are flagged.
- Renders resolve stand-ins only for frames the pipeline asks for; frames
the read-ahead meets on the way (skipped by speed-ups) are left alone.
- A GoPro GPR finds its JPEG in the index when an import or upload kept it
in a sequence of its own (same original stem and capture time), for
probes, deep analysis, renders, thumbnails, proxies and the editor;
GPRs whose JPEG is indexed later are probed again.
- Thumbnails judge an embedded preview by its own JPEG header.
- PostgreSQL writes tier fields 1000 frames per statement.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Texts that count with participles or adjectives still put a bare number in
front of a word that agrees with it in Italian, so one failure read "1 non
riuscite": the import result and its Done toast, the archive health line and
the thumbnail and import job log lines. They now read as labels in English and
Italian ("Copied: 40 · failed: 1"), like the scan and verify log lines; their
old translations leave the other 36 catalogs until the next translation pass.
The uploader's progress keeps the mockup's English and uses labels in Italian,
and the admin dashboard's upload total no longer agrees with the number.
`i18n check` now also fails on an English text that tallies two or more counts
with participles or adjectives. A single "{0} failed" is left alone, since the
placeholder there is as often a name or a size as a count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A mass rename moved the folders of nested sequences while holding only the
lease of the sequence whose folder moved, so an ingest, an editor save or a
thumbnail pass of a nested sequence kept writing in the folder as it moved: on
Windows the move failed and left the rename pending; elsewhere the writer
recreated the old folder and the nested step then failed. A moving step now
takes the sequence lease, then the thumbnail lease, of itself and of every
sequence it carries, by id, checks them all before anything moves, and
records the carried sequences' sidecars and index rows before letting go, so
they are journaled together.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Wanted proxies were matched to this PC's originals by SHA-256 only, and
frames adopted from a folder stay unhashed until verified. A desktop that
uploaded an adopted HEIC folder counted none of the proxies the server asked
for, showed the link in sync and sent none of them. The upload now keeps the
hash it computes for each original the index has none for and makes the
proxies from those too; the comparison counts a wanted frame no hash matched
against an unhashed original this PC reads by size (the server names its copy
by its own template, so not by name).
The wanted count was recomputed only when frame or render counters moved, so
proxies a render node sent left the row "Local ahead" with an upload that
sent nothing, and proxies the server started asking for later were never
counted. A link whose copy may make proxies for the server now keeps the
server's update time of the last comparison (sync_links.diff_remote_updated_at,
migration 0006) and is compared again when it moved.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Earlier versions made the server's proxies of HEIF frames from their embedded
previews. Those carry the frame's capture time, so the proxy pass kept them
and the sequence stayed marked as having all its proxies; renders and
analysis then read thumbnail-sized files and no client or render node was
asked for a real one. The proxy pass now treats a proxy whose long edge falls
short of the policy's for the frame (its own size when smaller, a tenth of
slack, frames of unknown size not judged) as stale, and the server refuses
such a proxy when one is sent (422 proxy_too_small).
PUT /api/v1/frames/{id}/proxy also took a proxy of a frame the server
decodes itself, replacing its own proxy with any JPEG of the right capture
time; it now answers 422 proxy_not_wanted for those and for frames missing or
damaged. Its follow-up jobs are queued even when the sender disconnects once
the proxy is filed.
A render node cleared the server's Undecodable flag on every frame, so a
damaged frame the server's own render skips was downloaded and failed the
node's job. Only a format the server cannot decode and the node can loses the
flag now; other undecodable originals are neither fetched nor rendered unless
read from their proxy.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Index restore (ENG-06, UI-09):
- A staged restore now runs on the files before the index is opened, so it also
recovers an index that no longer opens; Settings > Advanced > Restore works
without an open index (the current one is shown as unreadable).
- The staged copy passes PRAGMA quick_check (before migration, in a scratch copy)
ahead of any backup: a damaged copy is set aside as .failed and never renews the
daily copies. The index it replaces is kept as a VACUUM INTO copy, or, when it
cannot be read, copied whole with its WAL as titano-replaced-<stamp>.db outside the
rotation. The staged file is renamed over the index, so it is never applied twice.
- Archive > Maintenance gains Restore database..., which opens Settings > Advanced.
Archive settings (UI-03, ENG-03):
- An archive.json with an empty or overlong name (drive roots) can be edited again:
the name read is made usable as at creation.
- Proxy and thumbnail sizes outside the presets (an admin's 3840) are listed and
shown with their number.
- Changing the archive folder retargets the rows: an archive there is registered
and rescanned; with none, the rows edit only the defaults of new archives. The
rows never fall back to another archive of the index.
- Reset all and Import settings no longer rewrite the shared archive.json; Archive >
Reset section asks first, naming the archive.
- PUT /api/v1/archive/settings: 409 archive_busy on a lease conflict, 409
archive_manifest for a damaged, newer or foreign archive.json (was 500).
Parallelism (UI-02):
- Auto is the job engine's default, half the logical cores (BRIEF 14.6), with each
job's own decode and analysis threads; a value the user sets is the number of
workers and caps those threads. The memory budget is shared: each job's frame
window gets budget / workers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Reconcile and a scan that finds a sidecar with other frames than the
index now read the sidecar and index it while holding the sequence lease,
the one an editor holds while it saves its project. The save then either
lands before the move, which moves its positions, or reads the moved
settings and merges onto them; a save made in between can no longer
write positions of the old frame order back without a version conflict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A re-upload that repairs a missing or damaged frame is now reported as
IngestResult.Repaired and adds nothing to the uploader's used bytes; the
quota checks at start and completion skip uploads whose target sequence
already holds the content. The start shortcut and crash recovery share
one rule (UploadRules.StandIn): an intact copy stands for the upload, the
target sequence's own copy first, except when the target holds the
content only in damaged copies, which the upload's bytes then repair.
A sequence adopted at the archive root that holds frames is never given
a new folder when its root sidecar is missing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Setup registered .titano with Titano.exe "%1", but nothing wrote such a file
and Titano ignored the argument (BRIEF §18).
- Core ProjectBundle: versioned UTF-8 JSON ("titano-project", format 1) with
the archive (id, name, path), the sequence (id, folder, title, frame
count) and the project settings as project.json holds them; newer or
foreign files are refused, frame positions apply only to the frames they
were saved for, saving never replaces an earlier file.
- Data ProjectBundles: the file for a sequence of the index, and the sequence
a file names (by id, else the same folder of the same archive).
- Editor: "Save project file" on the Export tab (sequences of this PC's
archives); opening a file shows its sequence and applies the settings as
one undo step with an Undo toast, or says in one sentence why not (not in
the library, unreadable, a job runs).
- Titano.exe opens its file argument once the index is open and runs once
per data folder: a later launch hands its file over a current-user named
pipe, lets the running window come to the front and exits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Findings, advisor reasons and a few UI texts put a count before a plural noun
without plural forms, so English and Italian read "1 frames are black". Each
such key is now a plural stem (.one/.other) whose count is its first argument;
findings and reasons, which travel as data, resolve through the new Loc.Text,
which picks the form from that argument (a fraction takes "other"), so stored
deep reports and project reasons keep their keys and arguments. Texts with two
or more counts (job log lines, "frames with a capture time: 12 of 300") read as
labels, which agree with no number. A single exposure change gets its own
finding instead of "1 exposure changes, typically 0 frames apart".
The converted and reworded keys leave the 36 other catalogs until they are
translated again; the dead plain Shell.JobBar.Ready goes too. `i18n check` now
fails on an English text that counts a noun without plural forms.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings (UI-01, UI-02, UI-03, UI-09, RF-4):
- New Import, Analysis and Formats pages, in the order of Settings.html. Import holds
the defaults of new cards (session rules, subfolders, verification, duplicates,
after-import actions); Analysis the deep-analysis width cap, night and star-field
thresholds and deep analysis after import or scan; Formats the decode tier of every
format on this PC with a notice and Store install link per missing codec extension.
- Archive gains thumbnail size and rescan interval; its templates, proxy size and
thumbnail size are the open archive's own (archive.json) and new archives' defaults.
- Rendering quality, parallelism and background priority now drive the jobs: quality
maps to preparation size, read-ahead and default flow quality; parallelism sets the
engine's workers live and caps per-job threads; background priority raises the UI
thread while Titano is in front.
- Advanced gains Restore (daily backups, dry-run summary, destructive confirmation,
staged for the next start) and Reset all.
- The naming preview's sample title is a catalog string.
Engine (ENG-03, ENG-04, ENG-06):
- ArchiveService.GetSettingsAsync/UpdateSettingsAsync rewrite archive.json atomically
under a lease, then the index row; the server endpoint and the desktop use them, and
the desktop creates archives with Settings › Archive. ThumbnailPolicy in archive.json
sizes the thumbnails.
- DatabaseBackups: daily VACUUM INTO copies kept x3 on the desktop and on a server on
SQLite (DatabaseBackupService), staged restore checked and preceded by a fresh copy.
- Maintenance vacuums the SQLite index when 10 % or more is free (dry run reports it).
- JobEngine.SetWorkers; ProcessingOptions.Tune applies host tuning per job.
Archive setup toasts say why in a localized sentence (RF-1).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §6.3 requires every authentication method and TLS mode against the
PostgreSQL service containers, but the MD5, cleartext and trust tests always
skipped in CI (no roles) and the TLS tests skipped at run time because the
official images start with TLS off. .github/scripts/postgres-ci-setup.sh prepares
a server container: a role per method with its pg_hba line ahead of the image's
SCRAM line (the MD5 password stored as MD5), and TLS with a self-signed
certificate for localhost and 127.0.0.1, enabled with ALTER SYSTEM and a reload
whose rejected lines fail the script. With TITANO_TEST_PG_TLS=1 a server that
refuses TLS fails the TLS tests instead of skipping them, and a new test checks
that verify-full accepts the server whose certificate chains to
TITANO_TEST_PG_ROOT_CERT.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The server decodes with managed decoders only, so HEIF originals had no
proxies, thumbnails from their small previews and no pixels for analysis or
managed renders, and nothing could send it proxies (ENG-05). Manifests now
carry the archive's proxy spec and, per frame, its flags and whether the
server wants its proxy. PUT /api/v1/frames/{id}/proxy (Edit or RenderNode)
stores a JPEG of at most 64 MiB that decodes and whose Exif capture time is
the frame's, then queues thumbnails and the proxy pass. An upload from the
desktop makes and sends the wanted proxies after the originals and counts
them as local changes; a render node sends those it can make from the
originals it fetched once the job is done. The server never makes such a
proxy from a preview, drops one left by a renumbered frame, takes thumbnails
from a proxy, and analyses and renders those frames from their proxies.
Render nodes fetched every frame of the manifest: frames missing, corrupt or
excluded on the server failed the download, and originals not hashed yet
failed the SHA-256 check (ENG-07). Nodes now skip those frames, fetch unhashed
originals into the job folder with a size check, judge decodability with their
own decoders, and use the proxy of a frame they cannot decode.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §8.2 tiers 2 and 3 had no writer: PreviewOnly and Undecodable were never set,
so the advisor could not cap the output at the preview size and one unreadable frame
failed a whole render.
- ImageDecoder.Probe names a file's tier without decoding it (JPEG, PNG and TIFF
without opening the file); the light analysis probes frames whose tier is unknown,
and the deep analysis, renders from originals and thumbnail/proxy passes record
what decoding actually found (FrameTiers). Sidecar frames gain "tier", "previewW"
and "previewH"; the index gains frames.preview_width/height and
sequences.preview_only_count (migration 0005, SQLite and PostgreSQL).
- SequenceContext takes the preview size from preview-only frames, so the advisor's
output cap applies; the light analysis reports format tiers (preview-only frames as
information, undecodable ones as a warning under the deep analysis' key, listed
once); a sequence that gains undecodable frames warns at once.
- Only a file in a format the host decodes natively is flagged undecodable; files
beyond the host's decoders keep their tier without the flag, so render nodes and
proxies can still supply them.
- A frame that stops decoding during a render is replaced by its nearest planned
neighbour and logged instead of failing the job; the render fails only when no
planned frame decodes.
- The Library card shows a preview-only chip with the count (local and server
sequences: SequenceDto.PreviewOnlyCount, FrameDto preview size).
- GoPro GPR decodes through the JPEG the camera writes beside it when that is larger
than the embedded preview (BRIEF §8.1).
- Thumbnails use a stored embedded preview only when it reaches 320 px; a smaller one
sends the frame through the host's decoders instead (BRIEF §8.5).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A download whose .part already held the whole original (the job stopped while
hashing it) or more asked the server to resume past the end, got 416 and
failed on every retry; such a part is now hashed again, and one the server
cannot resume starts over (CD-1).
Auto-sync pulled the server's settings with the copy of the sequence read when
the comparison began, so an edit saved on this PC meanwhile was overwritten
unseen. The payload is now applied in one step under the sequence lease and
only while the local settings version is the one read; otherwise nothing is
written and the change is settled as a conflict (CD-3).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §6.2 asks for the probe at startup. The options are read once per process
from an in-memory connection, logged with the library version and added to the
desktop diagnostics bundle; nothing depends on them (no FTS or JSON use).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A mass rename or move of a sequence whose folder holds other sequences moved
their files without updating their index rows, and a target inside another
sequence's folder could nest one sequence in another. The plan now carries the
nested sequences (listed in the dry run, moved with the folder that holds them,
inner folders leaving first) and refuses a target inside a sequence folder with
a localized NestedRenameException (CD-4). The Archive screen counts only the
selected sequences in its summary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
CompactPacksAsync rewrote thumbs.pack under the sequence lease only, while
thumbnail jobs append to the pack under the thumbs-<sequence id> lease, so a
compaction racing a thumbnail pass could drop the entries just written.
Compaction now takes the thumbnail lease too (CD-5).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The project names frames by position (exclusions, hero, virtual-camera
keyframes), and an upload, import, scan or sync download of earlier photos
merges them by capture time and renumbers the frames after them; nothing
moved the project, so a render excluded the wrong photo and the project's
hero no longer matched the Library's.
project.json keeps its format: when the index takes a sidecar in which frames
were inserted before indexed ones, the index's copy of the project has its
positions moved from the indexed order to the new one in the same transaction
as the frame rows, and project.json mirrors it unless another writer changed
it meanwhile. The JSON is edited in place, so members a newer Titano wrote
survive; only an insertion is followed (if an indexed frame is gone, the
positions stay). The settings version stays, so a synced copy receiving the
same frames makes the same move (CD-2).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A sequence created with POST /api/v1/sequences had no folder, and the ingest
looked for its sidecar at the archive root: every upload into it failed with
503 commit_failed, so the Uploader's "New sequence" target never worked. Its
first frame now claims a folder by the rules of a sequence created by an
upload (folder template with its title, unique variant, sidecar with the
row's id, title, tags, rating, notes and project), and the row takes the
folder in one transaction (DOCKER-1).
A frame flagged missing or corrupt, or whose file is gone or has another
size, no longer stands for an upload: the start short-circuit and crash
recovery match only intact frames still on disk, and the ingest repairs such
a frame with the verified copy (same id and position, flags cleared, a damaged
file kept beside it as name.damaged-<time>) instead of calling it a
duplicate. The Uploader deletes a source only after the server received and
verified its bytes in that upload, never on "already on the server" (SRV-1).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
ATimedOutComparisonIsRecordedAndLiveUpdatesGoOn polled until the server's
settings reached the local copy and then asserted that the link's error was
cleared. The engine writes the local copy first and stores the link (error
cleared, versions agreed) afterwards, so a poll landing between the two writes
saw the old error: 1 failure in 60 runs idle, 11 in 60 under CPU load.
The agent tests now wait for SyncService.Changed, which the engine raises once
a comparison stored every link and state (the moment the Server screen reloads),
and assert on that settled state. The same fix applies to the proxy refresh
test (the cache is complete before the link and the job: it waits for the job,
whose row showed Transferring until then) and the retry test (the agent stores
the snapshot before it clears the last error and raises Changed).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Save view and Rename view use the growing label column and show a failed
save as one sentence in the dialog. The Library reads a remote card's
proxy cache off the UI thread, sets a sequence's folder left to right and
centres the Rating chevron. A sequence back in the index refuses a
restore with SequenceInLibraryException, tested with the one-sentence
causes of a refused delete or restore.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
SequenceQuery.Rendered and SyncStates back the Library's Rendered, Not
rendered and Synced status choices. ISyncRemote.FirstFrameAsync reads one row
of the frames page (default: the whole list), so a remote card without a hero
frame no longer downloads the server's manifest for its thumbnail.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Once a folder has moved into the trash (or back), its index step runs to the
end with no cancellation and a failed step moves the folder back, so trash and
index never disagree. Running or paused archive-wide jobs (scan, rebuild,
import, maintenance, a verify of everything) block a delete of every sequence
of their archive; a verify of named sequences blocks those. A row whose folder
is gone is refused (FolderMissing) instead of losing its settings. Delete
revalidates the plan cheaply (index row, jobs, sidecar id from its head)
instead of measuring every folder again; the dry run reports progress. A
restored folder without a sidecar gets the record's title, tags, rating and
notes and drops a hero frame it no longer has. EditSequenceInfoAsync changes
one field from the current sidecar values.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Restore left a folder without a sidecar out of the index until the next scan,
so Undo and the trash's Restore seemed to do nothing; such a folder is now
adopted under the sequence's own id, as a scan would adopt it, and comes back
at once with its settings and renders.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Server sequences that are not in the local index open through a RemoteSequenceSource:
proxies from the cache, project from the server's settings with their version (a 409
merges again), analysis report from the server, analyses and renders posted as server
jobs (one per preset) and followed through the server's events. Set hero now reaches the
index (SequenceEdit.HeroFrameId) so the Library card shows it. The Export tab gains the
Sync option (remembered in the project) and restores "Save both" copies through undo.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
SequenceTrash plans (files, bytes, trash folder, blocked reasons) and moves
each sequence folder whole into .titano/trash/<id> under its leases, next to a
record of its index row and renders, then drops the index rows; restore moves
it back (to a free folder when the old one is taken) and indexes it again from
its sidecar with the same ids. The server's DELETE /sequences/{id} now uses it
and refuses a sequence a job is working on (409 sequence_busy).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Union of the Tooltips resources; sample data keeps the sync server and the
simulated cards; the import test names App.Infrastructure.Formatting fully now
that a test namespace of the same name exists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Conflicts are settled against the versions the user was shown; a later change on
either side refuses the choice and compares again. Title, tags, rating and notes
changed differently on both sides are a conflict too (no silent tag union).
- Links are written under the engine's gate and forgotten only after a 404; linked
local copies are read by id; unlinked copies with the same originals are linked
by content.
- A failure on one sequence is recorded on its link; the others are still compared.
- Downloads hash unverified local copies first and restore originals missing here.
- Background proxy downloads give way to the user's requests; "Keep proxies offline"
refreshes the caches of sequences opened with proxies, checks free space and backs
off after a failure.
- Renders travel on request: Send exports (chunked, hash-verified upload keeping the
render id; new POST /sequences/{id}/renders endpoints) and Get exports.
- Server screen: stable row buttons, mockup column grid, Tab through rows, conflict
rows first on the card colour, localised conflict detail, Save both confirmation,
Pause metered uploads, culture switch, Library one-word sync glyphs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- The rebuild gate adopts 400 sequences of 250 real photos (one fifth of the
§1.1 library, same frames per sequence) and runs on SQLite and PostgreSQL.
- The rebuilt index is compared with the original in every column of every
sequence and frame (only UpdatedAt, the rebuild time, is left out), and the
first differing row is named.
- Synthetic frames are seeded by the sequence's position, so every run builds
the same library; the Library open gate says it runs on a new connection pool
with a warm OS cache instead of calling it cold.
Measured locally (PostgreSQL 16): Library open 259 ms SQLite / 181 ms PostgreSQL,
filters <= 6.4 ms; rebuild of 100,000 frames 1.8 s SQLite / 4.7 s PostgreSQL
(budget 120 s).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
"1 sequenze su 3" read wrong in Italian: a single failure now reports its
own line (title and reason); the count is kept for two or more. A worker
whose job could not be finished while the engine stops logs it instead of
faulting, so disposing the engine never throws.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §14.7: the server falls back to managed formats when no node is
available and says so in the job log. An MP4 job waits for render nodes at
least the node timeout, then as long as an online node can encode its codec
at its size; after that the server's engine takes it and writes each output
it cannot encode as MJPEG in AVI at the same size and frame rate, with a job
log line. A job the server started resumes there. Selective acceptance is
asynchronous for that; when node availability cannot be read the job keeps
waiting.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A render reserves the output name it picks, so the same preset queued twice
no longer overwrites one output with the other; render rows take ids from
their job and entry, so a resumed job recognises only its own outputs and
never deletes another render's file. A light pass records its status under
the sequence lock and cannot clear a deep pass's. Renders and Auto value
changes made by the server engine publish sequenceChanged events.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A node registering again gives back the job its previous run abandoned, so
a restart within the heartbeat timeout no longer leaves it running forever.
Frame downloads retry dropped connections from the partial file; a 404 at
registration waits for the next poll; render remarks reach the job log; a
render the server engine started stays with it. POST /jobs splits a batch
into one job per preset, and a node fails a batch it cannot send back
instead of reporting it done. Renders honour Settings > Rendering: hardware
encoders only where the preference allows them, also for what a node offers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC