Commit Graph
29 Commits
Author SHA1 Message Date
Alby96andClaude Opus 5.5 5012c3bbd2 fix(archive): erase replaced originals only on the archive's own word
A conversion counted as deleted when no frame of the sidecar held it, no
tombstone ended its chain and every frame was hashed. A sidecar rebuilt by
adoption meets that after a routine verify although it never knew the
conversion, so the originals were erased, the dry run calling them the last
copy, while the damaged conversion was still in the folder. A sequence found
nowhere and missing from this index counted as gone in the same way, even
when the walk had only skipped its folder (photos without a sidecar), and its
live conversion was never hashed.

A conversion is now deleted only on positive evidence: a Deleted tombstone
ending its chain in the sequence's sidecar, the sequence in the trash, or the
trash's record of erasing it (.chronos/trash/.erased/<id>.json, written
before a deleted sequence's folder goes while a replaced entry of it stays,
swept once none does). Anything else keeps the entry, and its job log line
says what settles it: verify the sequence (a frame never hashed), scan the
archive (a sidecar missing or unreadable), rebuild the index (a row the
archive does not bear out), or restore the entry to keep its photos.

Also:
- a dry run or an emptying walks the archive once for every sequence that
  moved, and again only when a folder it found no longer holds it;
- a download queues the passes a frame swap cleared whatever stops the job
  (JobContext.EnqueueFollowUpAsync with a token), as a restore does;
- the confirmation's detail takes Tab and scrolls from the keyboard when it
  is longer than its card.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:36:01 +01:00
Alby96andClaude Opus 5.5 4dd3050334 fix(app): the Edit picker waits for a page the list is loading instead of spinning
To select the sequence edited last, the picker reads pages until it is listed. When the
list had asked for a page as it scrolled, LibraryPager.LoadMoreAsync answered nothing at
once while that page was in flight, and the loop asked again without ever yielding the UI
thread that page needed to finish: a core spun at 100% and the picker never settled
(EditSectionTests timed out under load and kept the test process alive). The loop now
waits for the page in flight (LibraryPager.WhenLoadedAsync) and stops when a page brings
nothing.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-02 11:37:27 +01:00
Alby96 48a0ce3e02 fix(archive): weigh replaced originals against the archive, not this index
Owner review 2, phase 4b, fix round 2 (trash and sync).

- Emptying a Replaced entry decided "conversion deleted" from this host's index
  alone, so a conversion another host made, or one this index had not read yet,
  could be taken for deleted and its originals erased without re-hashing it. The
  survey now reads the archive: the sequence's sidecar where the index or the
  entry says it is, in the trash, or found by walking the archive's folders. Its
  Replaced tombstones are followed and every conversion it holds is re-hashed. A
  conversion counts as deleted only when the sidecar shows it (a Deleted
  tombstone, or the frame gone while every frame is hashed and no photo of the
  folder is unlisted), when the sequence is in the trash, or when no sidecar of it
  exists and this index has no row either. Whatever the archive cannot tell, or a
  converted frame whose file changed since, keeps the entry, and the job log says
  why (changed after the plan, sequence busy, conversion no longer matches,
  conversion not located).
- The erase weighs a Replaced entry under the entry's and the sequence's leases
  and settles the sequence first (an undo waiting for that entry's lease
  completes), so the entry it reads again and fingerprints is the one it erases.
  Read before the settle, a consumed entry's folder vanished under the erase.
- Each sidecar is indexed once per survey: one conversion's entry (every frame it
  swapped) is weighed in one pass, not one pass over the sidecar per photo.
- The desktop Empty confirmation names every entry whose conversion was deleted
  first, with why, wherever the trash lists it; the detail scrolls when long. The
  panel lists them first as well.
- Download originals queues the passes a frame swapped to another encoding
  cleared (light analysis, the deep analysis it had, thumbnails, proxies), as any
  replacement does.
- The job log lines of uploads and downloads are resources (en, it).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 27d9a512183e64da9a3d7fa69a267470ca3ce744)
2026-11-02 10:33:34 +01:00
Alby96 c669d0504d fix(convert): the job converts exactly the photos its preview listed, once
A conversion job could still do something its confirmed dry run did not show,
or refuse what it should have converted:

- An upload landing between the confirmation and the sequence's turn made the
  sequence Changed at every retry. Each ConvertSequence now names the photos
  the plan converts (Photos, their frame ids); the job takes those from its
  re-plan, checks their content against the confirmed digest and leaves photos
  that came in since as they are. A photo the plan did not list is never
  converted, whatever changed on disk or in the index since the dry run.
- A file another program held during the dry run was planned as Missing and
  then converted or not depending on the re-plan. It is now its own reason
  (inaccessible, "held open or cannot be opened"); a truncated file reads as
  undecodable. At job time a confirmed photo that cannot be opened leaves the
  sequence Blocked for the retry; a held photo the job does not convert does
  not hide a real change.
- The same sequences could be converted twice (two dialogs or tabs, a lost
  answer, no dry run at all). MassConverter.QueueAsync checks the queued,
  running and paused conversions and queues under one lock, in the caller's
  context (the desktop's enqueue shows a toast on the UI thread); a job's own
  re-plan treats sequences of conversions queued before it as busy.
- The per-photo space check reserved a full batch of photos even when fewer
  were left, so a job whose preview had the space could stop at every retry.
  It now reserves the photo and those after it that may convert at once.
- New sequence now says in the dry run, the panel's totals and confirmation,
  and a new desktop confirmation, how many photos each new sequence lacks;
  only sequences that are copied use those words.
- On the server, a confirmation takes only the plan kept for the index as it
  is now (503 plan_dropped otherwise, never a plan made inside the request),
  and busy sequences and free space are as they are at every request. The
  panel's Apply asks the dry run again first, with Close still available,
  and confirms only the same fingerprint.
- Maintenance keeps another host's conversion staging as long as its journal
  and purges both together; the unstaged-copy failure and blocked sequences
  are logged in catalog sentences.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit fefd9c34ebfeed1f9e84161610ef286026d38355)
2026-11-02 10:33:34 +01:00
Alby96 8174852a2c fix(server): keep convert dry runs like Reorganize's, say what a new sequence lacks
The convert endpoint planned the whole selection inside the HTTP request, again for
every mode, quality keystroke and confirmation, with no limit: behind a proxy an
all-sequence conversion could never get past its dry run or its apply.

- ReorganizePlanCache becomes PlanCache, shared by Reorganize and Convert: one plan
  per key made apart from the request, two at once across both kinds, eight kept,
  15-minute timeout, 5-minute lifetime, 503 plan_dropped. Keys are typed records
  (ReorganizePlanKey, ConvertPlanKey) that also say which exceptions are refusals.
- A conversion plan is keyed by archive, a convert stamp of the index
  (SequenceRepository.GetConvertStampAsync: the Reorganize stamp plus, per planned
  sequence, the photos' count, sizes, formats, pixel sizes and missing, corrupt,
  preview-only and undecodable flags), the sequences and the target with the
  quality that counts. Not the mode: the request's mode and options are set on the
  kept plan, and the free space is measured again at every request through the
  engine. A plan made while the volume was away is not kept (503 archive_offline).
- New sequence holds the converted copies alone: the dry run says the skipped
  photos are not copied into it (Archive.Convert.NotCopied.*, Server.Convert.OnPcNew),
  the panel's totals, column and confirmation give the count, and so does the
  desktop's summary.
- Panel: the preview is asked in Replace's neutral words; a dry run cut off by a
  proxy is asked again while the totals show how long it takes, plan_dropped is
  retried once; an apply the server let go plans again, a changed one shows
  Admin.Convert.PlanChanged, and one with no answer is not resent (its job may be
  queued).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit f0b1e379ce7c08b6d3459ab25ca6214c8f366f6c)
2026-10-27 22:15:51 +01:00
Alby96 d0bbd77c92 fix(archive): settle conversions by content and keep their aliases through trash, undo, sync and ingest
Owner review 2, phase 4b, fix round 1 (trash, undo, recovery, sync and ingest).

- Replace journal: records a phase (moving, written, undoing) and the name each swapped
  frame is filed under. Recovery decides "sidecar written" by what the sidecar lists, not
  by the frames version any writer moves; a failed rollback stays undoing and its failure
  now stops the writer (as a photo deletion's recovery does). The ingest settles restores
  and replacements first, so an upload can no longer complete a swap that never happened.
- Emptying a Replaced entry re-verifies each replacement where it is now: in the sequence
  through later conversions (a second conversion no longer strands the first originals),
  or, when the conversion was deleted, its copy in the trash. The dry run marks such
  entries "conversion deleted" (fingerprinted, shown on the desktop and the panel), and
  the confirmed emptying may then erase them instead of keeping them forever.
- Undo of a conversion takes exactly the entries its job made (the job id is recorded on
  the entry), never entries found by time window.
- Project positions translated by photo use the sidecar's photo of every frame still
  there, so positions on a converted frame stay put when another frame went meanwhile.
- Sync aliases are equivalence classes: an original converted on both sides is one photo;
  link-by-content, proxy counting and proxy upload follow aliases; a download into a
  frame missing here swaps the other encoding into that frame instead of adding a frame.
- The ingest answers a converted photo's original (a card or folder imported again, a
  download) as a duplicate of its conversion and keeps the alias tombstone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 3341a2f845753fc4c5bcba51a3b645f126c95eaf)
2026-10-27 22:13:36 +01:00
Alby96 341fb77507 fix: conversions name, lock and settle as phase 4a's writers do
Phase 4b was built on phase 4a before its review fixes. Integrated on the reviewed 4a, the
conversion now follows the same rules as filing and the other writers.

- Names: a converted file is named as filing names a photo of its sequence (FrameNaming: the
  archive's file template, the frame's context in the sequence with its camera, lens, number
  and title, {name} the card's, {ext} the target's, a long name keeping its extension).
  Replace through ConvertOptions.FileName; New sequence through the ingest itself
  (StagedFrame.NamedAs), which numbers and names the copies in the new sequence. Names stay
  unique against every file present, those leaving included, so a Replace never moves onto a
  file; a test pins a stray file that keeps its bytes.
- Leases: stage A starts from the sidecar settled under the sequence's lease where the index
  has it then (SequenceWriter.ReadLocked), and FrameTrash.ReplaceAsync reads the row again
  under the lease, so a folder a Reorganize moved meanwhile is followed, never made again.
  A Reorganize the archive waits for keeps the conversion off its sequences (pinned).
- Journals: the replace journal is settled with the others. MassRenamer steps, restores into
  a sequence and sequence deletions wait for an unsettled replacement as they wait for a
  restore, and so do photo deletions, whose frames version the recovery reads
  (FrameTrash.EnsureReplaced); a scan settles it and reconciles nothing meanwhile; a restore
  settles its sequence's replace journal first, at the folder the index has under the lease.
- The convert job tells each sequence converted or made as it completes, as a Reorganize
  tells each step, so an editor open on it reads it again while the rest of the job runs.
- Desktop: JobKind.Convert gets its row in the settings' job priority list. A click on Apply
  that commits the quality no longer starts the same dry run again under the click (as 4a
  fixed for Reorganize).
- Panel: a dry run answered during the confirmation with the same plan no longer drops the
  confirmed Apply; a different plan is shown with Admin.Convert.PlanChanged (en, it).
- Tests: TrashDialogTests.EmptyQueuesTheJobOfTheConfirmedPlanOnly waits for the command to
  end before running it again (a running AsyncRelayCommand ignored the second Execute).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 2e0d1d6dcc10575734970bb9c77749f00777c859)
2026-10-27 22:03:07 +01:00
Alby96 a1c1c21ebd feat(app): Convert sequences from the Archive manager and the Library, with Undo after a Replace
Owner review 2, R7 asks for mass conversion after import on the desktop too, with a choice at
every run between Replace and New sequence. The desktop now uses the engine's conversion, the
same plan and job as the web panel.

- Convert... in the Archive manager's mass operations (the set) and the Library's mass bar (the
  selection of one archive; server cards are left out, two archives are refused with their own
  reason). The dialog has the format (JPEG, TIFF 16-bit, Linear DNG, the archival default), a
  JPEG's quality (1-100, 95) and the mode, which starts unchosen at every open: Apply waits for
  it. Each choice has a tooltip that says what becomes of the originals.
- The dry run stays in the dialog and follows the choices: each sequence with its photos and
  sizes before and after, the photos that stay as they are with why, the sequences left as they
  are (busy, offline, unreadable), a summary and the free space line; a volume without the space
  blocks Apply. The mode does not change what converts, so choosing it plans nothing again.
- Apply asks to type the number of photos a Replace replaces, then queues the convert job of
  exactly the plan shown; New sequence leaves the originals as they are and asks nothing.
- When a Replace job ends, its toast offers Undo: for each sequence it converted, the newest
  Replaced trash entry made while it ran goes back (a sequence changed since gets its originals
  as a new sequence). Undo runs once and never from the Windows notification.
- The Library and the Archive screen read the sequences again after a conversion; --capture
  renders archive-convert from a sample plan.
- Strings in en and it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 275469284f895fc92e2569339809e18bf59d1d6a)
(cherry picked from commit 76ba41f58983275ae4b1478edd403efb11da7c79)
2026-10-27 22:02:04 +01:00
Alby96 8c2b9f1bfe fix(archive): a rebase moves no row of the sequence that took the old folder; writers refuse a folder another sequence holds
Round 4 let every row under the old folder follow when that folder holds another sequence
now. When the scan took the new holder first, its own row (already rebased into the old
folder) then followed the moving sequence too and named that sequence's file, leaving its
own export without a row; a second scan did not repair it. Only the moving sequence's own
rows now follow because the old folder is taken, and a row of the sequence holding the old
folder never follows: its export is in its own folder whatever the other one took along
under the same name. The rebase callback now gets the owner of each row.

Writers that file into the folder the index has for a sequence checked only that the folder
existed. After another index moved the sequence away and another one into that folder, Take
server wrote the server's settings into the other sequence's project.json, Save both wrote
this PC's copy into its .chronos, and a render sent for the sequence was filed among its
exports. SequenceFolders.Holds treats a folder whose sidecar names another sequence exactly
like a missing one, and every such writer asks it: settings sync and conflict resolution
(Errors.Archive.FolderMoved), Save both's copy and its clean-up, server render filing (503
folder_moved, the upload kept), export downloads, render jobs as they start, proxies sent and
proxy passes, the deep analysis checkpoint and the editor's project save. A thumbnail pass
refuses a sidecar of another sequence before it opens the pack.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit b406a4f6a9a7a3121e9e40289663fb62ee31948e)
2026-10-27 20:36:20 +01:00
Alby96 c3756d03c9 fix: keep render filing retryable and writers out of a folder another index moved
Third fix round of owner review 2, phase 4a (Reorganize), cross-cutting items.

- Server render filing now runs under the sequence lease, so it can meet a busy
  sequence or an offline archive. Both completions (client render uploads and
  render-node results) used to answer 500 and leave the upload stuck in
  Committing until a restart. They now answer 503 sequence_busy or
  archive_offline, which clients retry. The upload goes back to receiving with
  its part file and the node keeps its job (UploadService.ReceiveAgainAsync).
- Save both: when this PC's copy cannot be written (another index moved the
  folder), the server's version is no longer applied, even if this index's scan
  relocates the row before the apply would run. A copy that has to be dropped is
  deleted from where the folder is now, as a best effort.
- Export rebase on a folder move (scan and Reorganize): the sequence's own
  export follows the folder unless its file is still at the old path and not at
  the new one. A file written into a re-created old folder therefore keeps a row
  that finds it, so the file is never stranded.
- A render job refuses to start when its folder is not where the index has it,
  which also stops it from re-creating the old folder. Renders fetched by sync
  are now filed under the sequence lease into the current folder, or not at all
  (new string Errors.Archive.FolderMoved, en and it).
- The proxy pass holds the thumbnail lease one batch at a time (a quarter of
  the lease wait), then lets it go for longer than a waiter's poll and reads
  the folder and sidecar again. Before, another process's Reorganize, sequence
  deletion or pack compaction could wait out its lease wait and fail. Updated
  the stale comments on that lease and ARCHITECTURE.md to match.

Tests cover each fix, and each new test fails with its fix reverted. Also
covered: proxy store and pass in a moved folder, RenderStore with the folder
gone, Take server with the folder moved, and an editor save with the folder
moved.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 811509d32a118ed50ad10d47d4b002e534da9d77)
2026-10-27 19:16:28 +01:00
Alby96 0377040a19 fix(archive): a case-only target that is the sequence's own folder is kept; stored templates never fail other edits
Reorganize refused a case-only folder target whenever a folder of that exact
name was on disk. On a case-insensitive file system that folder can be the
sequence's own, when the disk spells it as the template does and the index
does not (renamed in Explorer, or an outer level a change of case left as it
was), so the plan gave a needless " (n)" folder. RenamePlanner.Kept now
refuses only when both exact names exist, the condition MassRenamer.TargetTaken
and MoveFolder already use.

ArchiveSettings.Problem held both templates to the template rules on every
UpdateSettingsAsync, so an archive.json saved before the rules made every
desktop Settings > Archive edit fail. A template the file already holds is now
only checked for being usable; a template the edit gives, and both templates
of a new archive, meet every rule. A broken rule throws TemplateRuleException
(an ArgumentException naming the field), and the desktop toast shows that
rule's sentence instead of "Something went wrong".

Also corrects comments that ignored RenameBlock.Unreadable (the whole
sequence stays as it is) and the ARCHITECTURE Naming row.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit ac7a0c36df83b6d43651caf0225c530466242c97)
2026-10-27 19:16:27 +01:00
Alby96 6e99a4b269 fix(archive): exports follow a folder any index moved; proxies, exports and copies no longer recreate it
Second review of owner review 2, phase 4a (Reorganize), cross-cutting findings.

- A second index of the archive (a desktop sharing a server's archive, or a folder moved by
  hand) moved the sequence row at its next scan but left renders.output_path at the old
  folder: the export answered 404 there. The scan now rebases the render rows in the same
  transaction when it finds a sequence in another folder.
- The rebase covers every render of the archive under the old folder: the sequence's own
  exports always, and another sequence's export saved inside it (through the Export folder
  picker) when its file moved with the folder. That check keeps the exports of a sequence
  that took the old folder since (a later Reorganize on the other index) where they are. A
  change of case only counts as a move.
- The desktop now tells an open editor after each Reorganize step
  (ArchiveServiceOptions.SequenceChanged -> AppServices.SequenceReorganized), and the editor
  reads its sequence again where it is now, so frames no longer decode blank until the next
  save. LocalSequenceSource.LoadAsync also requires the same folder on both row reads, so a
  move that commits during the frame listing is never taken as current.
- Writers that wrote without the lease, or trusted a row another index had moved, could
  create the old folder again. A proxy sent by a client is now filed under the sequence's
  lease into the folder the index has then, and a gone sequence or folder answers 404
  (sequence_busy 503 after the lease wait). The server files a render a client or render
  node sends under the lease (ArchiveService.UnderLeaseAsync). "Save both" keeps its copy
  under the lease. The proxy pass holds the thumbnail lease, as the thumbnail pass does. The
  deep analysis opens its checkpoint under the sequence lock only while the folder is still
  there, and a pass whose folder another process moved records nothing (the job logs
  Advisor.Log.FramesChangedElsewhere). Editor saves and sync applies refuse when the folder
  is gone.
- ARCHITECTURE.md no longer claims more than this: a render of another process whose folder
  moves while it runs is still not stopped.
- ArchiveVerifier.FlushAsync: corrected the comment. A move keeps each file's stamp, so only a
  check that found the file missing no longer applies.

Tests cover the scan path with a later swap into the vacated folder, another sequence's
export inside a moving folder, a photo deletion refused when the folder moved while it
waited for the lease, proxies sent and made after a move, Save both during a move, a deep
analysis whose folder another index moved, a render filed after a move on the server, and
an open editor reloaded by a Move job.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit c857b98f795b22956c060f1c5acf4d94b6d1c994)
2026-10-27 18:09:02 +01:00
Alby96 59ee982e4d fix(reorganize): Apply on the first click, one offer per toast, no open dialog replaced
Review of owner review 2, phase 4a (R7): the Reorganize dialogs of the desktop and the web panel.

Desktop
- Clicking Apply first takes the focus from the template field, which committed it and started
  a dry run identical to the one on screen: Apply turned off under the click. A commit now plans
  only when the templates differ from the shown plan (or the last dry run failed).
- The Settings toast's Reorganize… disposed whatever dialog the Archive screen had open, so a
  running Delete stopped without being asked. An open dialog now stays and its archive is not
  switched; Reorganize says it waits and opens once that dialog closes, with the archive's
  templates read again and every part the toasts offered meanwhile.
- Each Settings toast takes its own archive's offer (one pending offer per archive), and a toast
  gone early (dismissed, pushed out) lets the next change of that archive raise its own toast:
  Toast.Closed now says when a toast leaves the screen.

Web panel
- The Library sends the selected ids up to a thousand. all:true is used only above that, when
  the selection is exactly what Select all fetched without a filter and the archive has not grown
  since, so a sequence unticked or added later is never reorganized; otherwise the toast asks to
  select again.
- The preview's "before" of an untitled sequence is its old name, not the new title twice.
- A dry run of the same request answering during the confirmation no longer drops the confirmed
  apply; a plan that really changed is shown and said (Admin.Reorganize.PlanChanged).
- Enter in a template plans at once (the form never submitted on Enter).
- The confirm tooltip and the module header no longer say the moves are verified: moves and
  renames are not hashed.

Strings in en and it; the reworded key exists in no other culture.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit bed718fb5af2ef69943fd348690c689259872a34)
2026-10-27 16:30:01 +01:00
Alby96 9ce201cd70 fix(archive): exports follow a Reorganize folder move; writers resolve the folder under the lease
A Reorganize step that moves a sequence folder carries its exports/ with it, but only
the sequences and frames rows followed: renders.output_path kept naming the old folder,
so the server answered 404 for the export, Get/Send exports and Reveal lost it, and no
scan or trash restore could repair it. RenderRepository.RebaseFolderAsync now rewrites
the archive-relative output paths of the step's sequence in the same transaction as the
frames (idempotent on resume; absolute outputs and the archive root are untouched).

Writers that read a sequence row before taking its lease wrote into the folder a
Reorganize had moved meanwhile, creating it again (project.json from the editor or a
sync, a thumbnail pack) or failing on its missing sidecar. They now take the folder from
the index row read under the lease (SequenceWriter.FolderAsync): the editor's save
refuses with FramesChangedException and reloads at the new folder, FramesCurrentAsync
reports a moved folder, and the sync apply, project store, thumbnail pass and its
status, decode tiers, analyses, verify, info edits, ingest, duplicate flags, pack
compaction and photo restores write where the sequence is now; a photo deletion planned
before the move is refused as stale.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit be28d8acf0d96012c94a266f8af61e9bbafaa28d)
2026-10-27 16:29:59 +01:00
Alby96 b253cac8d4 fix(archive): Reorganize names as filing does and refuses templates that lose or hide photos
Reorganize with the archive's own templates planned renames and moves for
photos just filed, and some templates could strip extensions, hide sequences
from scans or stall a dry run. Owner review 2, phase 4a findings.

- Filing and Reorganize share one context: uploads and imports name every
  photo with the sequence's camera and lens (its first photo's, or the
  creator's hint), an upload's folder from its first frame in the new
  sequence, and a missing capture time from the sequence start instead of
  the current time. The planner expands folder and title templates from the
  first frame in the sidecar ({name}, {ext}, {iso}...), never today's date.
- Titles expand as text (ExpandText): "Paris: night" stays as typed.
- A sequence whose sidecar cannot be read (torn, another sequence's) keeps
  its folder, title and names, listed with why, and so does every folder
  around it; the dry run reads every sidecar, nested ones included.
- Kept never gives one folder to two sequences of a plan whatever the case,
  and a case-only move onto another folder is refused instead of taken as
  done.
- Shared template rules (TemplateRules) for the server's Reorganize and
  archive settings and the desktop's fields: a file template must keep the
  photo's extension ("{n}{ext}" refused) and tell a session's photos apart;
  a folder template may not write a level scans skip (a leading dot,
  originals, proxies, exports). Levels a title gives are escaped with "_".
- {ext} comes from the file, or from the original name when the file lost
  a photo's extension, so a Reorganize can put it back.
- Unique names cost linear time (UniqueNames) with the same names as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 6c734777e01476881a3f34b3188571cc3f7150ab)
2026-10-27 16:29:31 +01:00
Alby96 ad72501f11 feat(app): Reorganize existing sequences from the Archive manager, the Library and Settings
Owner review 2, R7 asks to rename and move sequences after import on the desktop too.
The desktop now uses the engine's Reorganize, the same plan and job as the web panel.

- One Reorganize… dialog replaces Rename… and Move… in the Archive manager and Move… in
  the Library. It has three templates: folders, file names and titles. Each one has a
  switch and is checked as it is typed. Folders and file names start on, filled from the
  archive's settings; titles start off as {title}. Renaming only titles is the Titles
  switch alone.
- The dry run stays in the dialog and follows the typing. Each sequence shows its folder,
  title and first file names before and after. Sequences carried along with a folder are
  marked, and photos that keep their names are listed with the reason. A summary counts
  the sequences that change, the files renamed and the names kept.
- Apply no longer changes the archive from the dialog. It queues the engine's move job
  with exactly the plan shown (its fingerprint), so the work can be paused, resumed after
  a restart and followed in Jobs. The job refuses the plan if the archive changed after
  the dry run.
- The Library's Reorganize… works on the selected sequences of one archive. The Archive
  screen reads the archive again when a move job ends.
- After Settings › Archive saves a new folder or file template to an archive that holds
  sequences, a toast offers Reorganize… for every sequence. Its templates are the ones
  changed since; a second change made while the toast is up adds to that toast instead of
  opening another.
- Strings in en and it. The keys of the old Rename and Move were removed and pruned from
  every translation, so the 36 other languages show the new keys as untranslated instead
  of keeping "Move".

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 7bbf451f737a71b768dcd70a77b998daaef851f3)
2026-10-27 14:04:37 +01:00
Alby96 4518ffe655 fix(archive): settle trash journals under their leases and say why restored photos stayed
Second fix round of owner review 2, phase 3 (engine, server, desktop).

- A photo never hashed whose original is missing can be deleted again: it goes
  into its trash record without a file and without a tombstone (nothing is left
  to name), stays listed until Empty erases it, and a restore keeps it with the
  reason "no file". FrameDeleteBlock.Unhashable now blocks only a present
  original that cannot be read; the API answers it as 409 photo_unreadable
  naming the photo, and every block has its own code and message.
- Deleting a whole sequence first settles an interrupted photo deletion,
  restore or ingest of it (ReadLocked under its lease), so no journal or half
  entry travels into the sequence's trash entry; it refuses while a restore
  into it waits for its busy entry.
- FrameTrash.Settle takes the photo entry's lease and leaves the journal for
  later while the entry is busy (an emptying), so it never races EraseAsync;
  meanwhile no other restore writes its journal over it and scans do not adopt
  its files.
- The hashes computed for frames that stay (to find a twin of a deleted photo)
  go into the sidecar and index, and only a frame whose first and last 64 KiB
  match a deleted photo's is read whole.
- A restore into a new sequence rewrites its record after each photo filed, so
  a crash or a database failure never leaves filed photos listed.
- An upload completion no longer has a window before the commit: the ingest
  checks the sidecar's tombstones under the sequence lease a deletion takes
  (IngestRequest.RefuseRemoved), unless the upload asked to bring it back.
- A restore reports each kept photo with its reason (no longer matches its
  record, could not be moved back, already in the sequence, had no file); the
  desktop line and the API message say so in en and it, and the tooltip holds
  the whole sentence. The desktop tells TrashMismatchException by its type.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 1858f1f450a35fb8383ede8d80ce5f8de9b7ceac)
2026-10-27 13:53:41 +01:00
Alby96 a133306fb0 fix(app): show what a trash restore kept, and drop stale trash translations
The desktop trash dialog sent the "N files stayed in the trash" sentence
through ShowError. ArchiveFailures.Cause has no arm for it, so after a
partial restore the red line and Narrator said "A file of the archive could
not be read or written." The sentence itself appeared only in the tooltip.
The same thing happened to an entry none of whose files matches its record.

- ArchiveDialogViewModel.ShowMessage shows a sentence that is already
  localized. The trash dialog uses it for kept files, and its tooltip names
  the files kept (six of them, then "+ N more").
- ArchiveFailures.Cause passes FrameTrash's Archive.Error.TrashMismatch
  sentence through. It matches the sentence's text because the engine throws
  a plain InvalidDataException. Any other InvalidDataException, such as a
  sidecar that belongs to another sequence, still reads as a file error.
- Archive.Trash.List, Tooltips.Archive.Trash and Tooltips.Archive.TrashRestore
  changed meaning in English: they now cover photo entries as well as
  sequences. They are removed from the 36 cultures other than en and it, so
  those cultures fall back to English and `i18n check` lists the keys as
  untranslated instead of showing the old sequence-only wording.
- The XAML comments describe what the trash dialog and its error line show
  now.

Tests: the dialog restores a photo entry and a sequence entry and checks
which rows are left. A photo entry with one tampered file shows the
KeptFiles sentence and keeps its row. An entry with every file tampered
shows the TrashMismatch sentence.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 2524a11445c87d37625b01095ef7c2a84a2ee422)
2026-10-27 12:46:45 +01:00
Alby96 51782a3ada feat(archive): photo delete, tombstones, trash kinds and emptying, library API
Owner review 2, R6: the web panel manages the library without editing it, so
the engine and the server must delete single photos safely, keep them out of
sync afterwards, and let an administrator restore or finally erase the trash.

- Migration 0008: frame_removals (tombstones by sequence and SHA-256, reason,
  replacement); the sidecar gains "removed" (omitted when empty) and frames a
  reserved "source"; the indexer writes the tombstones on every sync, so a
  rebuild keeps them, and drops a hero frame that is gone.
- FrameTrash: dry run (busy, frames changed, offline, would empty), delete under
  the sequence lease with a write-ahead journal that the next writer undoes
  after a crash, files to trash/photos/<seq>-<time>/originals with a record,
  sidecar without the frames plus tombstones, index sync clearing analyses,
  thumbnails and proxies, proxies renamed to follow their frames, follow-up
  jobs. Restore re-hashes every file, keeps mismatches in the trash, puts the
  same frame records back and drops their tombstones, or files the photos into
  a new sequence through the ingest when theirs is gone.
- Project positions on vanished photos are translated by photo and wait as
  pending frames, so they come back with a restore.
- Trash entries have a kind (sequence, photos, replaced); emptying is a dry run
  with a fingerprint and a new EmptyTrash job (18) that erases exactly the
  planned entries, refuses a stale plan and erases replaced originals only
  while their replacements still hash right.
- Sync honours tombstones: nothing one side deleted is offered back, local
  files are never deleted, replaced photos count as their replacement; the
  server answers an upload of a tombstoned SHA-256 as already there.
- Server: sequence thumbnail, photo delete, bulk delete/retag/jobs, trash
  list/restore/empty endpoints with their error messages; a verify of
  sequences now targets their archive (POST /jobs failed before).
- Desktop trash dialog lists photo entries and empties the trash after a
  typed confirmation through the same job.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 35bb56690a1d69eae57153d036e1409201cd73f7)
2026-10-27 10:49:34 +01:00
Alby96 5cb6809fd0 fix(app): keep Jobs › Scheduled true to the scheduler
Owner review 2, phase 2 (R10) review findings on the desktop:

- Showing the Scheduled tab (and coming back to Jobs on it) reads the
  actions' availability again, as does a Run now answered unavailable;
  rows and an open editor follow, so turning proxies on no longer needs a
  restart.
- A delete the index refuses keeps the row: the failed call no longer
  reads as Deleted (the enum's default), so a live schedule never leaves
  the page.
- SchedulerReady completes false when the index (or the engine) does not
  open, so the tab shows that the schedules do not run instead of an
  empty panel.
- A read of a schedule's last job that started before a live change or a
  later read is ignored, so a finished job no longer shows as running.
- The editor's Action, Unit and Priority dropdowns follow a language
  change, keeping what was chosen.
- Weekly days in the table read from the UI language's first day, as the
  editor's toggles do.
- Backup tooltips no longer promise daily copies with three kept (their
  translations are dropped for retranslation); two tooltips now name the
  real Settings rows (Proxy size; Spazio su disco › Limite della cache).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit c137e2c74cddef299b2e4179ef0417fa4977953c)
2026-10-27 09:58:09 +01:00
Alby96 e384564784 fix: logging never fails a job, one backup retention, first copy after the upgrade
Owner review 2, phase 2 review findings (scheduler core).

- Log.Write caught only IOException. Microsoft.Extensions.Logging wraps
  provider failures in an AggregateException, so a log line that could not
  be written (in tests: the process-wide sink of a stopped server whose log
  folder was gone) escaped JobEngine.RunAsync's catch before the failure was
  stored: the job stayed running and the worker faulted. This was the cause
  of the intermittent JobApiTests/ArchiveModuleTests failures. Log.Write now
  drops any non-fatal sink failure, TeeLogSink keeps a line from the other
  sinks, FileLogSink drops a line it cannot write and reopens the file at the
  next one, and LoggerSink drops what the providers throw. The scheduler's
  loop relies on the same guarantee.
- The daily backup loop (RunDailyAsync, IsDue, Interval, CheckInterval) had
  no caller since the index-backup schedule replaced it; it is removed and
  the DatabaseBackups summary describes the schedule.
- The first copy after the upgrade no longer waits a day (or for 03:00):
  SystemSchedule.LastDone seeds a new row due at once when its work was last
  done a period or more before, and both hosts pass the newest copy in the
  backups folder for index-backup.
- Back up now (Settings and Archive), the copy kept before a restore and a
  backup job that keeps fewer prune to the largest Copies kept of the backup
  schedules (DatabaseBackups.KeptAsync), not a fixed three. The four
  tooltips that promised three daily copies are reworded (en, it) and their
  stale translations deleted.
- New tests for the scheduler loop itself: a tick, Wake, a pass that threw,
  and dispose during a pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit c5ad0c4c3f636129afe5dd1ce039185516da5621)
2026-10-27 09:56:47 +01:00
Alby96 ac121acf7c fix(logs): apply log settings from the first line and name the locking variable
The desktop opened its log files with the default limits and wrote its first
line, which prunes, before Settings › Advanced › Logs were applied. Every start,
and every launch that only hands its file to the running Chronos, deleted logs
older than 14 days and cut the folder to 1 GB whatever the user kept.
AppLogging.Open now builds the sink from the stored settings before that line;
the settings are read again once the launch owns the data folder.

A total below one file deleted each finished file as the next one opened. The
rule now lives in LogFileOptions.TotalBelowFile: the server keeps refusing it,
the desktop raises the total to the file size and its rows no longer offer the
combination.

The desktop log rows threw on negative sizes from an imported or hand-edited
file and showed raw values the files never got; they now show the applied ones.

Upgraded Unraid and compose installs keep CHRONOS_LOG_LEVEL=Information, which
locks both levels. The lock stays; the server now reports which variable fixes
each locked setting (LockedBy), so the panel's tooltip names it exactly and says
to remove it to change the value there. The releases README tells upgraders.

The former-constructor log test no longer fails across midnight UTC.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 8ba7162bd5926d34c5ec4e40e2a2dad063ee19c3)
2026-10-27 09:56:46 +01:00
Alby96andClaude Opus 5.5 8d66be709c fix: one audit retention, scans at start, live deep analysis and a 6-hour upload sweep
Settle what the R10 scheduler and R11 log packages left open when they were
integrated (owner review 2, phase 2).

- Audit retention has one source of truth, the audit-cleanup schedule's age
  limit. AuditRetentionDays defaults to 0 (the audit log is kept forever, so
  an upgrade deletes nothing; the schedule is seeded off) and accepts 0-3650,
  what a schedule's age limit takes. Saving Settings › Logs › Keep audit sets
  the schedule's limit (on with a limit, off at 0) without a restart;
  CHRONOS_AUDIT_RETENTION_DAYS locks it and Reset goes back to it.
- Both hosts scan right after start again, as their polling did: the server
  after the scheduler starts, the desktop once the archive was reopened and
  again when an unplugged one is back. Scheduler.RunSystemNowAsync runs the
  archive-scan schedule when it is enabled and has not run since the start,
  and skips while its scan is pending.
- Desktop scans follow Settings › Analysis › After a scan at every run: a scan
  schedule without its own deep parameter asks the host
  (IScheduleHost.DeepAnalysisAfterScan), the archive-scan schedule no longer
  freezes the setting, and the editor offers deep only for analyses, so the
  setting's tooltip stays true.
- The server's upload clean-up runs every 6 hours instead of every 30
  minutes, to keep the job history readable; idle uploads still expire after
  UploadRetentionHours.
- The Unraid template and docker-compose leave CHRONOS_LOG_LEVEL empty or
  commented out, and say that setting it locks both log levels, so the admin
  panel can change them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:51:04 +01:00
Alby96 bc786c12c4 feat(app): Jobs › Scheduled and the desktop scheduler
Owner review 2, R10 on the desktop: every timer that queued work out of
sight is now a visible, editable schedule of this PC.

- DesktopScheduleHost implements IScheduleHost: the PC's time zone, the
  archive at Settings › Archive's folder (refreshed from archive.json,
  none while it is offline), and three system schedules: archive-scan
  (every:<ScanIntervalMinutes>m, seeded once from the old setting, no
  catch-up), index-backup (every day with catch-up, replacing
  DatabaseBackups.RunDailyAsync) and housekeeping (daily 04:00 with
  catch-up: job history 90 days and the new cache-trim step).
- AppServices starts the Scheduler after the engine, once the archive was
  reopened; an unplugged archive is looked for every minute and the
  scheduler woken when it is back. The rescan loop and the daily backup
  loop are gone; ApplyJobSettings wakes the scheduler.
- CacheStore.Trim brings the cache to Settings › Storage › Cache limit,
  oldest files first, skipping files in use and the proxies, render-node
  and server-import folders; CacheTrimStep runs it as a clean-up step.
- Jobs gets a Queue | Scheduled segmented control. Scheduled lists the
  schedules (switch, name, action, when, next run, last result) with Run
  now, Edit, Reset (system) or Delete (user's, confirmed), the selected
  schedule's last runs with Show in queue, and an in-window editor that
  checks every field with the scheduler's limits. Jobs a schedule queued
  carry a "Scheduled" pill; the history line follows the housekeeping's
  job-history days.
- JobNotices: a scheduled background run raises a toast only when it
  fails (upkeep stays silent).
- Settings › Archive › Rescan every is removed; ScanIntervalMinutes stays
  only as the seed. Strings in en and it; the others are retranslated.
- The capture shows jobs-scheduled and jobs-schedule-editor on a stopped
  scheduler clock with sample schedules.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit e25d812feb3f417cb9251c748c29e8035fd9b03c)
2026-10-27 02:26:07 +01:00
Alby96 e5508e7e69 feat(data): scheduler engine, schedules table and housekeeping jobs
Owner review 2, R10: every timer that queues work becomes a visible schedule,
so the server and the desktop need one shared engine to run them.

- Migration 0007: schedules table (system rows keyed by system_key) and
  jobs.schedule_id; Job.ScheduleId, JobDto.ScheduleId, JobRepository
  HasPendingAsync / ListPendingTargetsAsync / ListByScheduleAsync.
- ScheduleRepository: seeding that keeps user edits, reset, compare-and-set
  claim of a run (one winner across processes), outcomes.
- Scheduling: in-house recurrence (every/daily/weekly/monthly, DST gap moves
  forward, ambiguous time runs once), ScheduleActions resolving scan, verify,
  thumbnails, proxies, analysis, maintenance, backup, cleanup, duplicates and
  orphans into archive jobs, IScheduleHost, and the Scheduler loop (catch-up,
  clock going back, run now, CRUD as API v1 DTOs).
- New job kinds Backup (16) and Cleanup (17) with handlers, shared clean-up
  steps (job history, audit log, trash report that never deletes) and host
  steps through ArchiveServiceOptions; read-only Duplicates and Orphans report
  handlers, so the server can run those kinds too.
- JobEngine no longer purges history at start: the housekeeping schedule's
  job-history step does; JobEngine.CanRun and an EnqueueAsync with scheduleId.
- Protocol DTOs for schedules; job kind names in en and it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit eb0edd2483a493db7c6945d5b494461cabb2a4ad)
2026-10-27 02:08:11 +01:00
Alby96 0e84392f4f feat(logs): log level, retention, size limits and rotation on server and desktop
Owner review 2, R11 asked for more log settings. The file sink now writes daily or
hourly files, continues a full file in numbered parts and prunes by age and by the
total size (never the file being written); its options change while it runs.

Server: the file and console levels are separate and read by the logging filters
at every line, so the admin panel's new Logs group applies without a restart; the
engine's level follows the lower of the two. This also fixes a bug: the file logger
was fixed at Information, so CHRONOS_LOG_LEVEL=Debug or Trace never reached the
files. New variables CHRONOS_LOG_CONSOLE_LEVEL, CHRONOS_LOG_RETENTION_DAYS,
CHRONOS_LOG_MAX_FILE_MB, CHRONOS_LOG_MAX_TOTAL_MB, CHRONOS_LOG_ROTATION,
CHRONOS_AUDIT_RETENTION_DAYS and CHRONOS_DIAGNOSTICS_LOG_MB lock their settings like
the others; the diagnostics zip keeps the configured share of each log.

Desktop: Settings > Advanced gains Log level, Keep logs, File size, Logs total,
Rotation and Diagnostics logs, applied at every save; Advanced's Reset section
restores them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit cc875784e4952ee0e4c807b9d9c18496d3d5a8c3)
2026-10-27 02:08:09 +01:00
Alby96andClaude Opus 5.5 1f089888e8 feat: owner review 2 phase 1: :latest, Unraid array space, Settings with About, whole-folder import (#9)
CI / Build and test (push) Successful in 5m11s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 6s
Release / Build, test and publish (push) Successful in 8m57s
CI / PostgreSQL 16 integration (push) Successful in 3m10s
CI / PostgreSQL 17 integration (push) Successful in 3m30s
CI / Docker image (push) Successful in 49s
Release / Server image (push) Successful in 1m4s
- :latest follows the highest stable release, or the highest pre-release while none is stable (Chronos.Tools release-channels); bad tags are refused before anything is built.
- Unraid: CHRONOS_SPACE_PATH and the template's Array view show the array's free space; the write volume (cache) is shown apart; completions check the archive volume (507).
- Settings is a gear, docked at the foot of the admin sidebar; About is the last part of Settings on the desktop and the panel.
- Import > Folder > Whole folder: one sequence per format (desktop only).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com>
2026-10-27 01:09:59 +01:00
Alby96andClaude Opus 5.5 f80fc148bf fix(app): build update links from the releases repository address (#7)
CI / Build and test (push) Canceled after 2m45s
CI / PostgreSQL 16 integration (push) Canceled after 0s
CI / PostgreSQL 17 integration (push) Canceled after 0s
CI / Docker image (push) Canceled after 0s
CI / YAML check (push) Canceled after 0s
CI / Windows tests and installer (push) Canceled after 0s
Gitea writes a release's html_url and browser_download_url with its ROOT_URL,
which on the owner's server is the plain-http LAN address
http://192.168.30.23:3000. The update check accepts only https links, so it
ignored v0.1.0-rc.1 entirely. The page and download links now come from
ChronosReleasesUrl, the address the build names for its users; only the
tags, file names and sizes are read from Gitea's answer.

The lease renewal test's timer periods follow TestTiming too: on the shared
CI host a 100 ms renewal timer came 700 ms late once.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com>
2026-10-23 14:39:10 +02:00
Alby96andClaude Opus 5.5 f2b58522b9 refactor!: rename Titano to Chronos and move CI and releases to Gitea (#6)
CI / Build and test (push) Successful in 8m14s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 7s
Release / Build, test and publish (push) Successful in 13m19s
CI / PostgreSQL 16 integration (push) Successful in 4m49s
CI / PostgreSQL 17 integration (push) Successful in 5m28s
CI / Docker image (push) Successful in 53s
Release / Server image (push) Failing after 10s
The owner renamed the product and moved the repository to the self-hosted
Gitea (https://gitea.encke-hake.ts.net/BalboSoft/Chronos) for more control,
and asked for Actions and a first automatic release with the server package
and the Windows exe (docs/requests/2026-10-23-chronos-gitea.md).

- Chronos everywhere: a byte-exact rename of contents and paths, then a
  per-language review of the forms the old name's ending had dictated.
- Gitea instead of GitHub: the update check, licence, issue and support
  links read ChronosReleasesUrl; the update check takes the highest stable
  version, offers a pre-release build its final release and reports a
  repository it cannot see as a failed check. EULA, security policy and
  Gitea issue forms live at the repository root.
- Gitea Actions for the Linux act_runner (.gitea/workflows): CI, release,
  nightly image and performance gates in the .NET SDK container with git
  checkout and the system SQLite. The release cross-compiles the Windows
  programs, checks their icon, version and DPI manifest, packs installers
  and zips, publishes the Gitea release and pushes the server image
  (REGISTRY_TOKEN). Windows-only tests run in an opt-in job on a Windows
  runner (WINDOWS_RUNNER).
- New Chronos.Tools commands: zip, gitea-release, postgres-ci (replaces the
  docker-exec script, which Gitea's service containers do not allow; the
  throw-away server runs without durability) and pe-check.
- Timed tests take their budget from TestTiming (CHRONOS_TEST_TIME_FACTOR,
  3 on the shared runner; the weekly performance gates keep theirs).

BREAKING CHANGE: programs, settings, data folders, file types, environment
variables and the Docker image use the new name; nothing is migrated from
Titano, which never had a release.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com>
2026-10-23 12:45:18 +02:00