CI / Build and test (push) Successful in 9m36s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 9s
Release / Build, test and publish (push) Successful in 14m4s
CI / PostgreSQL 16 integration (push) Successful in 8m26s
CI / PostgreSQL 17 integration (push) Successful in 8m43s
CI / Docker image (push) Successful in 50s
Release / Server image (push) Successful in 1m23s
Clients could not reach a server in a container whose ports are published as other host ports: the panel showed the container's ports, the template had no public HTTP port, and a bare host meant port 443. Public ports become panel settings, the panel shows the client address, both clients default to 8443, and an address that answers as another service is named as not a Chronos server (its certificate never offered for trust). The screenshot baselines are captured on the development PC and committed; measured values are fixed while the capture runs. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com>
98 lines
5.7 KiB
YAML
98 lines
5.7 KiB
YAML
# Chronos Server with PostgreSQL 17. Start: docker compose up -d Admin panel: http://<host>:8080/admin
|
||
name: chronos
|
||
|
||
services:
|
||
chronos:
|
||
# :latest is the newest stable release (before the first one, the newest pre-release); :<version> pins a release;
|
||
# :nightly is the development version rebuilt every night, not for production.
|
||
# While the organisation on Gitea is private, sign in before pulling: docker login gitea.encke-hake.ts.net
|
||
image: gitea.encke-hake.ts.net/balbosoft/chronos-server:latest
|
||
restart: unless-stopped
|
||
depends_on:
|
||
postgres:
|
||
condition: service_healthy
|
||
# Clients connect to https://<host>:8443, the Client address the admin panel shows (Settings › Network and TLS).
|
||
# Publishing a port as another host port ("18443:8443")? Keep the container port (after the colon) and set
|
||
# CHRONOS_PUBLIC_HTTPS_PORT and CHRONOS_PUBLIC_HTTP_PORT below, or the public ports in the admin panel, to the host
|
||
# ports. LAN discovery reaches clients only with "network_mode: host"; on this bridge network clients type the
|
||
# client address. With host networking drop "ports", give the postgres service
|
||
# ports: ["127.0.0.1:5432:5432"] and set CHRONOS_DB_HOST to 127.0.0.1: the name "postgres" no longer resolves there.
|
||
# The server then listens on the host's 8080 and 8443 itself: if another service uses either, set CHRONOS_HTTP_PORT
|
||
# or CHRONOS_HTTPS_PORT below to a free port and leave the public ports unset.
|
||
ports:
|
||
- "8080:8080"
|
||
- "8443:8443"
|
||
environment:
|
||
CHRONOS_ADMIN_USER: admin
|
||
CHRONOS_ADMIN_PASSWORD: ${CHRONOS_ADMIN_PASSWORD:?set CHRONOS_ADMIN_PASSWORD in .env}
|
||
# postgres (with the CHRONOS_DB_* values below) or a full connection string: Host=…;Database=…;Username=…;Password=…
|
||
CHRONOS_DB: postgres
|
||
CHRONOS_DB_HOST: postgres
|
||
CHRONOS_DB_NAME: chronos
|
||
CHRONOS_DB_USER: chronos
|
||
CHRONOS_DB_PASSWORD: ${CHRONOS_DB_PASSWORD:?set CHRONOS_DB_PASSWORD in .env}
|
||
# auto (self-signed), pem or proxy. Behind a proxy, set CHRONOS_TRUSTED_PROXIES to the proxy's own address (only
|
||
# loopback is trusted otherwise). Give a proxy container a fixed one (ipv4_address, on a network with an ipam
|
||
# subnet that this service joins too) and let it reach Chronos on that network, not through a published port.
|
||
# Never list a subnet or the network's gateway (.1): Docker relays connections to the published ports (IPv6
|
||
# clients, the host) from the gateway, and each of them could then choose its client address. For a proxy on the
|
||
# host itself, run this service with network_mode: host; the proxy then reaches Chronos over loopback.
|
||
CHRONOS_TLS_MODE: auto
|
||
# CHRONOS_TRUSTED_PROXIES: "172.30.0.10"
|
||
# The host ports clients use, when "ports" publishes 8080 and 8443 as others. Set here, the admin panel can no
|
||
# longer change them.
|
||
# CHRONOS_PUBLIC_HTTP_PORT: "8080"
|
||
# CHRONOS_PUBLIC_HTTPS_PORT: "8443"
|
||
# The ports the server listens on, with network_mode: host only (on a bridge network the mapping above decides).
|
||
# CHRONOS_HTTP_PORT: "8080"
|
||
# CHRONOS_HTTPS_PORT: "8443"
|
||
CHRONOS_SERVER_NAME: Chronos Server
|
||
# Jobs run one at a time. Photos the running job processes at once (default: half the cores), and the priority queue
|
||
# (a higher job pauses the running one, which resumes afterwards). Set here, they can no longer be changed in the
|
||
# admin panel's Settings.
|
||
# CHRONOS_PARALLELISM: "4"
|
||
# CHRONOS_PRIORITY_QUEUE: "true"
|
||
# The log files' and the console's level: Trace, Debug, Information, Warning, Error, Critical or None (default
|
||
# Information). Set here, it locks both levels: the admin panel's Settings › Logs can no longer change them.
|
||
# CHRONOS_LOG_LEVEL: Information
|
||
# The log files (/data/logs) and the audit log: the console's own level, the days files are kept, the size (MB) at
|
||
# which a file continues in a numbered one and that of all files (the oldest go beyond it; 0: no limit for either),
|
||
# daily or hourly files, the days the audit log clean-up keeps audit entries (0: forever) and the MB of each log in the
|
||
# diagnostics zip.
|
||
# Set here, they can no longer be changed in the admin panel's Settings › Logs.
|
||
# CHRONOS_LOG_CONSOLE_LEVEL: Warning
|
||
# CHRONOS_LOG_RETENTION_DAYS: "14"
|
||
# CHRONOS_LOG_MAX_FILE_MB: "50"
|
||
# CHRONOS_LOG_MAX_TOTAL_MB: "1024"
|
||
# CHRONOS_LOG_ROTATION: daily
|
||
# CHRONOS_AUDIT_RETENTION_DAYS: "0"
|
||
# CHRONOS_DIAGNOSTICS_LOG_MB: "4"
|
||
# The admin panel shows the archive volume's free space. An Unraid share (/mnt/user/<share>) reports its primary
|
||
# storage, often the cache: map the share's array view to /space (volumes below) and show that one instead.
|
||
# CHRONOS_SPACE_PATH: /space
|
||
PUID: ${PUID:-1000}
|
||
PGID: ${PGID:-1000}
|
||
TZ: ${TZ:-UTC}
|
||
volumes:
|
||
# The archive folder should belong to PUID:PGID; an empty or root-owned one is given to them at start (the folder
|
||
# only, never its contents).
|
||
- ${CHRONOS_ARCHIVE:-./archive}:/archive
|
||
# Optional, with CHRONOS_SPACE_PATH above: the same share seen on the array only, to show the array's free space.
|
||
# - /mnt/user0/Timelapse:/space:ro
|
||
- ${CHRONOS_DATA:-./data}:/data
|
||
|
||
postgres:
|
||
image: postgres:17
|
||
restart: unless-stopped
|
||
environment:
|
||
POSTGRES_DB: chronos
|
||
POSTGRES_USER: chronos
|
||
POSTGRES_PASSWORD: ${CHRONOS_DB_PASSWORD:?set CHRONOS_DB_PASSWORD in .env}
|
||
volumes:
|
||
- ${CHRONOS_PGDATA:-./pgdata}:/var/lib/postgresql/data
|
||
healthcheck:
|
||
test: ["CMD-SHELL", "pg_isready -U chronos -d chronos"]
|
||
interval: 10s
|
||
timeout: 5s
|
||
retries: 10
|