The Windows README removed only the prompt's own account from a data folder
created by an unelevated console run, which missed a console run by a
standard user. It now removes the account the service's refusal names.
The DECISIONS rows on OneDrive sync roots and on the service's start-up
log say which later rows partly supersede them.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A read of the open archive's settings that an Archive row edit overlapped
was dropped and left to the edit's end, so a folder change could complete
while the rows still showed the previous archive. The read now waits until
no edit is being written and reads again, so the retarget and the reload on
showing Settings are done only once the rows show what the archive holds.
A smoke test edits a row while Settings reads the archive, with the
settings lease held elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The Windows README told an administrator to run icacls /reset /T on a data
folder created by an unelevated console run, which let every local user read
the database, the TLS key and the temporary admin password until the next
successful start. It now takes ownership with takeown /A /R and removes only
the console account's entries with icacls /remove:g, so nobody else gains
access at any step.
The 2026-10-12 Start with Windows decision said the uninstaller leaves the
StartupApproved value; setup removes it with the entry, as the later Task
Manager state row says.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A library synced with its Sync button lies beside the account's UserFolder
(%USERPROFILE%\<tenant>\<site> - <library>), so a portable copy unpacked
there kept .\data inside a synchronised folder. OneDriveFolders.SyncRoots
also reads HKCU\Software\SyncEngines\Providers\OneDrive\*\MountPoint, where
OneDrive registers every folder it syncs (the location Office reads), and
takes the registry root as a parameter for tests on a scratch key.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A server import stages its copies in this PC's cache folder, yet a full disk
there read 'The destination is full.' beside every photo, and a refused
write 'Titano may not write to the destination.', which sent the user to
the server. IImportSink.StagesOnThisPc (true for ServerImportSink) selects
Import.Failed.CacheFull and Import.Failed.CacheAccess instead.
A failed archive import job showed the job engine's raw text (SQLite, file
system or framework English) as the Import screen's line. ImportFailures.Job
keeps the archive engine's own localized sentences and shows 'The import
stopped before the end.' for anything else; the raw text stays in the
tooltip and the logs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings › Archive reads archive.json without the settings lease each time it
is shown and after a waited edit. On a slow share such a read could return
the file as it was before a template, proxy or thumbnail edit that was being
written, then put the old value back on the row and in this PC's defaults
while the archive kept the edit. ArchiveReadGate now drops a read that
overlapped an edit being written; the rows are read again at once, or when
the last edit being written ends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
PUT /api/v1/frames/{id}/proxy raised Kestrel's 1 MiB limit only inside the
handler, after its 404 and 422 answers and after authentication's 401 and
403. A proxy above 1 MiB left unread then closed the connection, and the
client retried a network error instead of reading the answer. The route now
carries IRequestSizeLimitMetadata (ArchiveImages.MaxProxyBytes) like the
chunk route, so routing applies it before anything answers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Ten new strings (proxy pass log line, import failure sentences, two server
errors, the OneDrive data notices and their tooltips), translated and
independently reviewed per language against each glossary.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Positions crossing copies could still land on other photos in three
windows:
- A push translated a row snapshot's settings against local frames
listed later, after a manifest round trip: an import of earlier photos
meanwhile moved the row's positions, and the server stored shifted
exclusions, hero and keyframes. SyncPositions now reads this copy's
row with its frames as one state (frames listed between two reads of
the row at the same frames version) and translates that row's
settings, at the settings version being pushed. The conflict
comparison and ApplyLocallyAsync compare against that same row. When
the copy was edited since, or its frames keep changing, nothing is
sent or applied and the next comparison translates again (Keep mine
reports a changed conflict; PushAll sends an edit saved meanwhile).
- The manifest read the sequence row, then paged its frames: an upload
committed in between paired settings of one frames version with
frames of the next. The server now lists them again while the frames
version moved during the listing, then inside a transaction holding
the row (on SQLite, on that transaction's connection, so no second
pooled connection waits behind the write lock). The client also
refuses to translate against a manifest whose frames are not each
listed once at 0..n-1.
- Server capture times were fetched only when something was unhashed,
so the same parked photo was written with or without capturedAt. They
are now fetched whenever the two frame lists differ; an equal project
then compares equal, and an entry can be placed on a photo that
arrives unhashed.
CompareOriginals counted unhashed server frames one-to-one against this
PC's photos, so two copies of one photo in a folder the server adopted
left Download on offer forever while the download fetched nothing. A
photo on either side is now there when any photo of the other side
matches it, as downloads and uploads find them. Paged frame listings
keep each frame once (an insertion between pages lists one again).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
TranslateFramePositions read the stored pending frames, then parked the
project's own hero when the receiving copy lacked its photo (leaving no
hero chosen), and only then placed pending entries: a stale pending hero
whose photo the copy held became the hero again and the newer choice was
lost. When a hero is chosen, stored pending entries no longer carry the
hero flag (an entry left with nothing to place goes) before positions
are translated, so only the hero parked now may wait.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
ArchiveIndexer.SyncAsync and the ingest's in-step append (and the first
frame of an API sequence) read the sequence row and upsert the whole row
from that read in one transaction. On PostgreSQL (READ COMMITTED) a
PATCH accepted between the read and the upsert was written back over:
its settings were lost and settings_version went back, so the PC that
pushed them later pulled the old settings over its edit.
The row is now read with SequenceRepository.GetForUpdateAsync (FOR
UPDATE, as EditAsync takes it). A PATCH committed first is then moved by
the insertion like any position; one arriving later sees the new frames
version and gets 409 frames_conflict.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Uninstalling (or an upgrade dropping a program) deleted the client's or the
Uploader's Run value but left its StartupApproved\Run value behind. A moved
entry keeps that state, so an entry the user turned off stays off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- ArchiveImages.IsProxyOf compares capture times to the microsecond the index
keeps (sidecars and Exif keep 100 ns ticks), and for frames read through
proxies also applies the policy's size rule, so the proxy pass, uploads,
thumbnails, renders, analyses, tiers, manifests and downloads agree.
- Proxy headers are cached per file while length and write time are unchanged
(and the file has settled), so manifests cost a stat per proxy.
- FrameTiers.RecordAsync checks proxy presence when it writes the sidecar and
returns the sequence's frames as they are, so a deep analysis or render that
ran while proxies arrived no longer flags the frames preview-only again, and
the analysis advises from the current flags.
- Server manifests ignore ProxiesBuilt for frames the server cannot decode, so
frames added since the last proxy pass are asked for their proxies.
- GET /sequences/{id}/analysis/report answers 404 for a report that found
frames unreadable before their proxies arrived (DeepReports.ReadCurrentAsync).
- The deep checkpoint key marks only frames read from proxies, so checkpoints
written by earlier versions still resume.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The Uploader runs for the whole sign-in session and read its sign-in
entry only at start, so an entry Task Manager turned off meanwhile still
showed as ticked. Opening the settings panel now reads it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
AppEnvironment now carries AppPaths.SyncedFolder: when the per-user data
folder itself lies in a OneDrive sync root, Titano still starts (nowhere
is safer), logs it and shows the error toast "Data inside OneDrive" with
Open, instead of the false "Data kept outside OneDrive". The latter now
needs PortableSyncRoot (renamed from the old SyncedFolder meaning).
A portable copy now in a OneDrive folder whose .\data still holds an
index or settings.json gets that folder named in the log and in a toast
("Earlier data unused", with Open). Nothing is moved or deleted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
GET /api/v1/archive/settings refreshes the served archive from
archive.json first, so the admin form (which saves every field) starts
from a desktop's change made since the last poll instead of writing the
old templates back. ServerArchive.RefreshAsync replaces the served
archive only when the refresh registered a change, and only through a
compare-and-swap against the archive it read, so a poll racing an
admin's PUT no longer puts the pre-edit row back for ten minutes.
RefreshSettingsAsync now ignores an archive.json a newer Titano wrote,
as documented, instead of registering what this version reads of it.
AppServicesTests now points the folder at an archive the index does not
list first, and checks that the archive no longer chosen gets no scan.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A retarget now returns the archive registered at its own folder, not at
the folder current when it finishes, so an edit made while folder A opens
no longer lands in the archive of a folder B chosen right after. The rows
and _archive follow only the latest folder; Reset section pushes to the
archive it asked about and reloads the rows when the folder changed. A
newer sidecar met while opening no longer faults the retarget silently:
it is reported like any open failure. The smoke test now waits for the
empty-folder retarget before editing, so the archives[0] fallback would
fail it, and covers the two-folder race.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Authentication answers 401 and 403 before the endpoint runs, with the chunk
unread; over Kestrel's 1 MiB limit the connection was closed and the
Uploader saw a network error instead of being asked to sign in. The chunk
route now carries IRequestSizeLimitMetadata for the largest chunk size a
server allows, which routing applies when it selects the endpoint.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A batched Thumbs or Proxies pass stopped at the first sequence whose folder
was renamed, deleted or damaged before the pass ran, and the others kept no
images until an administrator retried it. Each indexed sequence now gets its
own background pass, labelled with its title and de-duplicated against a
queued pass of its own, as after an upload.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The index's own predicate for sequences created without photos reads the
archive root's sidecar once per call and treats a damaged or unreadable one
as naming nobody. A torn root sidecar is therefore rebuilt under the
root-adopted sequence instead of a later POST /sequences row, and a sidecar
the server may not read fails the root folder alone instead of every scan,
rebuild, orphan check and scan follow-up. Maintenance leaves these rows out
of temporary-file purging and pack compaction, so the root's thumbs.pack is
compacted under the leases of the root's own sequence.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A proxy download caches a frame's thumbnail under its proxy name while
the server has no proxy of it (HEIF until a client or render node sends
one). The cache did not record which it was, so the thumbnail stayed
there for good after the server's proxies arrived (V-29).
- remote.json records each cached file's kind (proxy or thumbnail); a
later proxy download replaces thumbnails, and files of caches written
before kinds were kept, once the server offers the frame's proxy.
- A cache filled with thumbnails while the server had no proxies counts
as stale, so offline caches are fetched again when the proxies arrive.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A folder the server adopted and never verified lists no SHA-256. A
download of such a sequence failed ("did not arrive intact") because
every unhashed frame collapsed into one wanted entry and the empty hash
was refused, and desktops never sent the proxies the server asked for
those frames (V-9).
- Each unhashed server original is fetched by frame id into staging,
accepted on its size (two attempts, resumed with Range) and hashed
here; the archive ingest files it by that hash like any other.
- Server frames without a hash are matched to this PC's originals by
size and capture time: they are not downloaded twice, not uploaded
again, counted right in the comparison (each frame on its own), and
their wanted proxies are counted and sent from the matching original.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The Jobs screen's flush could take a render's end before the editor that
followed it had seen it, and announce it without the output file. It now
yields while the open editor follows that render (FollowsRender); an editor
closed in between still says it once, without the output.
Open on a job over more sequences than a Library page (a maintenance run over
a whole archive) now opens the Library as it is instead of looking every
target up and paging through the list to select them all. Selecting many
cards (Open's selection, Clear selection) counts the selection once instead
of once per card over every card.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Picking archive A, then B, then A again before B's read ended left A's read
marker set while its tree and figures were already cleared: Rebuild, Scan,
Verify and Maintenance were enabled and the rebuild dialog counted 0
sequences. ForgetRead now clears the marker too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A reply that is not the server's JSON (a reverse proxy's 502 page while the
container restarts, its 413 for a large body, a bare 500) reached the Import
screen as the HTTP reason phrase, in English, beside every photo. ErrorText now
uses an ApiError's message only when the server wrote it (a code that is not
TitanoClient's http_<status> fallback) and otherwise says what the status means:
too large, rate limited, not answering (gateway and timeout statuses) or a
server error. A card file that cannot be read while planning is listed with the
executor's catalog sentence instead of the system's text and full path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings synced between a PC and its server sequence were stored as they
came, in the other copy's frame order. When the inserted photos arrived
later (a download, an upload), the index moved those already-correct
positions a second time, so exclusions, the hero and camera keyframes
landed on other photos (V-21, CD-2).
- Settings are translated by photo (SHA-256, else size and capture time)
to the frames of the copy they go to: the server's before they are
compared or applied here, this PC's to the server's frames as its
manifest lists them before a push (SyncPositions).
- A position on a photo the receiving copy lacks waits in project.json as
a pending frame and takes its place when the photo arrives, on an
insertion or an append in step with the index; the Library's hero
frame follows. A hero chosen meanwhile wins, and advice does not fill
a hero while one waits. Old projects without the member are unchanged.
- Pushes send expectedFramesVersion; PATCH /api/v1/sequences/{id} answers
409 frames_conflict when the frames changed since, and the next
comparison translates again.
- A pulled payload equal to the local copy is settled without the
archive: an offline or read-only archive no longer fails the
comparison (V-10).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Renders, analyses, the server's manifests and proxy downloads take a proxy only
when its Exif capture time is the frame's (ArchiveImages.IsProxyOf); one left at
the index by a frame renumbered since counts as missing and is asked for again
(V-24).
- A frame whose original the host reads through its proxy (HEIF on the server) is
preview-only only while it has none: the light analysis and the proxy pass keep
the flag, the preview-only count, the light finding and the advisor's output cap
in step with the proxies, and an arriving proxy queues a light analysis on the
server (V-1, V-25).
- The deep checkpoint's content key includes whether each frame is read from its
original or its proxy, and analysis.json lists the frames measured from proxies;
an unreadable verdict on a frame now read from its proxy makes the report stale
(V-26).
- Thumbnails drawn from proxies are compared with the archive's thumbnail size
instead of 320 px (V-27).
- A resumed thumbnail or proxy pass sets ThumbsBuilt/ProxiesBuilt only when the
frames an earlier run did still have theirs, and the proxy pass logs frames
waiting for a client's proxy apart from unreadable ones (V-28).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The releases README told the operator to make Administrators the owner of a
data folder created by an unelevated console run. The server checks the owner
of every entry inside, and the TLS key and password file keep a protected DACL
that grants the console user, so it now gives takeown /A /R and icacls /reset
/T, and says that deleting the folder also deletes the SQLite database.
DECISIONS: the trusted-proxies row no longer endorses a Docker subnet, and the
sign-in entry cleanup row says an upgrade that renames a program moves its
entry rather than removing it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- While the open archive's archive.json cannot be read, the rows show the index's templates and proxy size and the
thumbnail size stays this PC's: the stand-in 320 no longer replaces the default of new archives. Settings ›
Archive loads through RefreshSettingsAsync, so opening it also brings the index up to a change made elsewhere.
- With no archive folder the rows edit only this PC's defaults, never the first archive of the index.
- An Archive row edited (or Reset section) while the archive at a just-chosen folder is opening waits for it and
goes to that archive (or stays a default when the folder holds none), instead of being undone when it opens.
- A portable copy whose data had to leave its OneDrive folder says so at start, with Open on the data folder.
- Opening Settings re-reads Start with Windows, which Task Manager may have changed meanwhile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §6.2 forbids a SQLite index in a synchronised folder. AppEnvironment.Detect now resolves the data folder
through Core.Windows' AppPaths and OneDriveFolders: a portable copy whose .\data would lie under a OneDrive sync
root (a OneDrive folder, or a Desktop or Documents folder backed up into one) keeps its data in
%LOCALAPPDATA%\Titano and stays portable otherwise; AppEnvironment.SyncedFolder names the OneDrive folder so the
user can be told. The pure choice lives in Core/IO/DataLocation (tested on Linux); reading the OneDrive accounts
key no longer fails start-up when it cannot be read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Task Manager's Startup tab keeps the Run value and writes a StartupApproved\Run value whose odd first byte means
off. The client and the Uploader now show such an entry as off; ticking the box removes the marker so the entry
runs again, unticking removes it with the Run value, and re-pointing the command after an update leaves it as it
is. Core/IO/StartupApproval holds the rule; the registry hive is injectable for tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- The desktop's rescans run for the whole session and each one targets the archive at Settings › Archive's folder
(as the Import and Archive screens do), so an archive created on the first run, chosen in Settings, relinked or
imported with settings is rescanned from the next tick on, and Rescan every always reaches a live timer. The
folder of the start is reopened (relink, interrupted renames) as soon as its archive.json is there, so an
unplugged drive or a folder without an archive no longer stops polling for the session.
- ArchiveService.RefreshSettingsAsync reads archive.json and registers the archive again when its name, templates
or proxy size changed elsewhere (a server's admin panel, another PC); null when the file cannot be read, is newer
or belongs to another archive. Desktop rescans and the server's polling call it first, so imports, uploads and
the admin panel follow the shared settings without a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The chunk endpoint raised the request body limit only before reading a chunk. A
chunk sent again after a lost answer, or to an unknown or finished upload, was left
unread above Kestrel's 1 MiB default, so Kestrel closed the connection instead of
delivering the answer. The limit is now raised before any answer, to the larger of
the upload's and the server's chunk size, and never lowered.
PUT /api/v1/archive/settings answered 500 when archive.json held a thumbnail size or
proxy quality out of range, which the admin API cannot set. It now answers 409
archive_policy with the policy to correct in details (Server.Error.ArchivePolicy).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A scan can index a sequence inside a folder the plan moves after the dry run was
shown (photos copied into a subfolder). The folder would then move with it while
its index row stayed behind. Apply now lists the index again before anything moves
and under each moving step's leases just before the move, and throws
StaleRenamePlanException naming the newcomer. A resumed journal drops such a step
while its folder has not moved yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A sequence created through POST /api/v1/sequences keeps an empty folder until its
first frame. Scans no longer adopt loose photos at the archive root under its id,
and a rebuild, the orphans report and fix, verify and the scan follow-ups no longer
treat it as the root sequence, as missing or as a sequence to analyse. All of them
use ArchiveIngest.AwaitsFolder.
On the server (ArchiveServiceOptions.ImagesAfterScan), a scan that indexes sequences
without thumbnails or proxies queues background Thumbs and Proxies passes for them,
as an upload does. A scan that finds photos added or removed clears ThumbsBuilt and
ProxiesBuilt together with AnalyzedLight.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A finished render's toast is claimed once (JobsViewModel.ClaimRenderToast):
the editor that followed the render to its end says it with its output,
also when the sequence cannot be read again (then without Show in
folder) or the editor closed meanwhile; any other render is said by the
Jobs screen. Before, the Jobs screen stayed silent whenever an editor had
the sequence open, so a failed reload or a render the editor did not
follow ended without a completion toast.
Open on a job over several sequences (toast, Windows notification, Jobs
row) shows the Library with every one of them selected, clearing a
search or filter that hides one and reading pages until each is listed,
instead of opening the first in the editor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Picking another archive, or the shown one leaving the index, now also
clears the previous archive's tiles, charts, last scan, recent runs and
rail badge until the new one is read, so a slow probe or a failed read
never shows them under the new archive's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A photo the executor could not copy now carries one localized sentence
(ImportExecutor.FailureText: its own checks, a full destination, access
denied, else "The photo could not be read or copied.") on the Import
screen and in the import job's log. The photos a stopped folder or
server import never reached show the stop's cause (ImportFailures.Stop:
the server's own sentence, not answering, untrusted certificate, card
gone, destination full or not writable), and a failed index check reads
"The index could not be read or written.". A refusal without words
reads as the catalog's sentence. The system's text stays in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
STATUS no longer claims every --capture screen is pixel-diffed: with no
baseline committed the step compares nothing. Next steps now starts
with accepting the first baselines from ci-screenshots. DECISIONS marks
the folder-scoped Run cleanup row as superseded by the log-based rule
and drops the branch-merge notes from that rule's row.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Moving the test into ArchiveLanguageTests turned "" into a raw,
invisible U+200F, so the line read as Assert.Contains("") and GitHub
flagged the file for hidden bidirectional text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
RemoveLeftovers deleted every Titano or Titano Uploader Run value that
started a file the upgrade removed, including a client or Uploader the
new version only renamed or moved. The new program then found no entry
to follow and Start with Windows was silently off. Setup now points such
an entry at the program of the same component in the new payload (its
shortcut target), keeping the options and the value name, and removes
it only when the component is no longer installed. Uninstall still
removes the entries of the programs its log lists.
StartupCommand.StartsFrom, left over from the superseded folder-scoped
cleanup, is gone; StartupCommand.Retarget replaces it and its misleading
test now covers how setup moves an entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The compose comments, the releases README and the Unraid template told
users to list the Docker network's subnet (172.17.0.0/16 on Unraid) in
TITANO_TRUSTED_PROXIES. That range holds the gateway, from which Docker
relays IPv6 clients and the host's own connections to published ports,
and on the default bridge every other container: each could again pick
its X-Forwarded-For and X-Forwarded-Proto. The guidance now names the
proxy container's fixed address on a shared user-defined network, warns
against subnets, the gateway and the default bridge, and sends a proxy
on the Docker host to network_mode: host (loopback). The server's
parse error no longer suggests a /12 network.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC