Commit Graph
17 Commits
Author SHA1 Message Date
Alby96 316c182b19 fix(sync,upload): keep tombstones honest and let an explicit upload bring a photo back
Sync:
- A server frame that has not been hashed is known by content only once it is
  downloaded: one this PC deleted (or holds as its replacement) is now deleted
  from staging instead of filed again, which also dropped its tombstone.
- An unhashed local original that turns out to be a photo the server deleted
  is not uploaded, and the archive verify then writes the hashes into the
  index, so the row settles instead of offering Upload for good.
- A tombstone leaves a photo out of the comparison only when its side no longer
  holds that content, so a tombstone left beside a held copy does not keep the
  other side's copy missing forever.

Uploads:
- StartUploadRequest.Restore (optional, never sent by sync or older clients)
  lets an explicit user upload file a photo deleted from the sequence again,
  also after the trash was emptied; the completion repeats it with
  ?restore=true and the ingest drops the tombstone.
- The completion checks the tombstone again: a photo deleted while its bytes
  were on the way is not filed (409 photo_removed, upload cancelled); the
  protocol client reports that as not sent.
- A tombstone of content a frame of the target still holds refuses no repair.
- Hidden dot names (AppleDouble "._" files) are refused, as the archive
  scanner leaves them out.

Web upload dialog:
- Upload again on rows marked Deleted before; the tooltip no longer promises
  a trash restore that may be impossible.
- Sends a capture time: the Exif DateTimeOriginal of a JPEG or TIFF-based file
  (minimal in-house reader, capture-time.js), else the file's time, so photos
  without Exif keep their order.
- Esc is stopped at keydown during a run (Chromium allows one prevented cancel
  per activation); hidden dot files are left out; a completion refused while
  another one files the upload waits for it; the same photo picked under two
  names waits for its first copy.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit d051bcfc351f5a08500ca864a6508576a95492a4)
2026-10-27 12:45:33 +01:00
Alby96 eb607d47aa fix(archive): crash-safe photo restore, hidden half deletions, tombstones for every photo
The review of owner review 2 phase 3 found that the photo trash could destroy or
strand originals outside the Empty job and let deleted photos come back.

- A restore into a new sequence stages each original inside its own entry
  (<entry>/.restoring), never in a staging folder other restores share or
  maintenance sweeps; any failure moves it back, the commit runs to its end once
  the file has left, a cancel stops between photos with the record kept true,
  and the next restore of the entry puts back what a crash left staged. Nothing
  erases a staging folder any more.
- A restore into an existing sequence writes .chronos/restore.pending.json before
  its first move; SequenceWriter.ReadLocked settles it (files back into the entry
  before the sidecar was written, record rewritten after), cancellation is
  checked once before the journal, and a companion that cannot follow puts its
  photo back whole. Only an intact frame keeps a trashed copy out.
- A deletion's record keeps a .pending name until its sidecar is written, so the
  trash neither lists, restores nor empties half an entry; a failed sidecar
  write undoes the moves, and scans settle any of the three journals.
- Photos never hashed are hashed as they go and get their tombstone; a photo
  with neither hash nor original blocks the plan (FrameDeleteBlock.Unhashable).
  Sidecars rebuilt from the photos, and sequences restored without one, keep
  their tombstones; the index drops a tombstone whose content a frame holds.
- Emptying re-reads and re-measures each entry under its lease before erasing.
- Once the sidecar is written a deletion or restore stands when the index cannot
  follow (logged; the next scan resyncs it).
- XMP companions are listed once per directory, case-insensitively; a restore
  into a new sequence picks a name its companions can follow, and one that still
  cannot is kept in the record as a leftover.
- thumbs.pack is re-keyed with the frames on delete and restore, so the queued
  pass reuses the thumbnails; the server checks the fingerprint of thumbnails of
  frames never hashed too.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 0bb631dd83d082e2569b98d127d827adc2e7f899)
2026-10-27 12:45:33 +01:00
Alby96andClaude Opus 5.5 6ea611d949 fix(admin): revalidate panel files, count bulk jobs, refresh every loaded row
The phase 3 packages land together, so the panel's pieces must stay in step:

- Admin files are served with Cache-Control: no-cache and their content
  ETag (If-None-Match lists, W/ tags and * honoured). With max-age=3600 a
  browser that loaded the panel before an upgrade could run new modules
  next to cached old ones for up to an hour; now it revalidates each file
  and only what the upgrade changed is sent again.
- The Library's Upload and a sequence's Add photos open upload.js, which
  now ships with the panel: the test requires the module (no 404), the
  dynamic import and the openUpload({ api, sequence, onDone }) calls.
- Bulk jobs over more than 1000 sequences queue one job per 1000; the
  toast now says how many were queued, also when a later chunk failed.
- The live refresh re-reads every loaded row, a thousand per request,
  instead of dropping rows beyond the first 1000 back to Load more.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 11:08:47 +01:00
Alby96 0e52bf0e1b feat(admin): upload photos from the web panel
Owner review 2, R3: the panel can add photos to an existing or a new
sequence without the desktop app. upload.js is a dialog the library pages
open (openUpload({ api, sequence, onDone })): file picker or drag and drop
(folders are counted and left out: whole-folder import stays on the
desktop), per-photo state, a total bar, Cancel that deletes the started
uploads, and a leave-page guard while sending. Each photo is hashed in a
same-origin module worker with an in-house incremental SHA-256 (8 MiB
reads; crypto.subtle cannot hash in pieces), which runs the FIPS 180-4
known answers and a crypto.subtle cross-check before its first hash and
refuses to hash on any mismatch; the server verifies the hash again.
Chunks go through api.putBytes with the session's CSRF header, two files
and two chunks at a time, retrying no answer, 429 and 503; quota, space
and permission refusals stop the run with the server's message, and a
photo deleted from the sequence shows as deleted before.

server/info now lists the photo extensions the archive files, so the
dialog offers and sends only those. The CSP already allows the worker
(worker-src falls back to script-src 'self'); tests pin that, the module
walk follows the worker, and a browser-shaped upload runs end to end
through the cookie session.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit c64c60ab8bb41c102182e284177ac04a56bf1058)
2026-10-27 10:52:40 +01:00
Alby96 aa1d4913a3 feat(admin): Library pages on the web panel (owner review 2, R6)
The web panel now manages the library without editing it: the owner can
browse and view sequences and photos, delete sequences and photos into the
archive's trash, restore or empty the trash and run mass operations, as
R6 asks, on top of the engine endpoints of the previous commit.

- Library page right after the Dashboard: search, Year/Camera/Status/Tag
  filters fed by a new GET /api/v1/sequences/facets, sort, cards or list
  (remembered per browser), lazy cover thumbnails, Load more by cursor,
  multi-select with Shift ranges and "Select all N" of the filter, and a
  sticky bar for the selection: Analyse, Proxies, Thumbnails, Verify,
  Tags (add/remove), Export CSV (client-side) and Delete (dry run, list
  of what moves to the trash, then the move). Filters live in the address,
  so Back from a sequence finds them again.
- Sequence view (#/library?id=): inline title, tags, rating and notes,
  facts, photos in pages of 500 with content-visibility, a photo viewer
  (proxy, arrows, Esc, Exif facts), Set cover, Download original, Delete
  photos (typing the count above 20 photos), Delete sequence, renders to
  download. No video editing controls.
- Trash view (#/library?view=trash, also linked from Archive): entries,
  Restore, and Empty (dry run, list, the localised word typed, the plan's
  fingerprint sent back, the job followed to its end).
- Live updates from sequenceChanged and jobState; keyboard grid (one tab
  stop, arrows, Space, Shift+Space, Enter, Ctrl+A, Esc); RTL, dark theme.
- GET /sequences takes rendered=true|false for the Status filter.
- ui.js: confirmDialog's typed confirmation by name, word or count, with a
  list of what the action concerns; formDialog. api.js: putBytes for the
  web upload, which the Library imports on demand (upload.js, optional).
- New web icons from icons.py (Image for the Library, trash, grid/list,
  arrows, stars, cover); directional glyphs mirror in right-to-left pages.
- Strings in en and it; tests for the facets (both dialects), the rendered
  filter, the menu, the modules and the on-demand upload import.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 029cf334f66cb6fa1265b96a6f8faff2964c11ea)
2026-10-27 10:51:04 +01:00
Alby96 51782a3ada feat(archive): photo delete, tombstones, trash kinds and emptying, library API
Owner review 2, R6: the web panel manages the library without editing it, so
the engine and the server must delete single photos safely, keep them out of
sync afterwards, and let an administrator restore or finally erase the trash.

- Migration 0008: frame_removals (tombstones by sequence and SHA-256, reason,
  replacement); the sidecar gains "removed" (omitted when empty) and frames a
  reserved "source"; the indexer writes the tombstones on every sync, so a
  rebuild keeps them, and drops a hero frame that is gone.
- FrameTrash: dry run (busy, frames changed, offline, would empty), delete under
  the sequence lease with a write-ahead journal that the next writer undoes
  after a crash, files to trash/photos/<seq>-<time>/originals with a record,
  sidecar without the frames plus tombstones, index sync clearing analyses,
  thumbnails and proxies, proxies renamed to follow their frames, follow-up
  jobs. Restore re-hashes every file, keeps mismatches in the trash, puts the
  same frame records back and drops their tombstones, or files the photos into
  a new sequence through the ingest when theirs is gone.
- Project positions on vanished photos are translated by photo and wait as
  pending frames, so they come back with a restore.
- Trash entries have a kind (sequence, photos, replaced); emptying is a dry run
  with a fingerprint and a new EmptyTrash job (18) that erases exactly the
  planned entries, refuses a stale plan and erases replaced originals only
  while their replacements still hash right.
- Sync honours tombstones: nothing one side deleted is offered back, local
  files are never deleted, replaced photos count as their replacement; the
  server answers an upload of a tombstoned SHA-256 as already there.
- Server: sequence thumbnail, photo delete, bulk delete/retag/jobs, trash
  list/restore/empty endpoints with their error messages; a verify of
  sequences now targets their archive (POST /jobs failed before).
- Desktop trash dialog lists photo entries and empties the trash after a
  typed confirmation through the same job.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 35bb56690a1d69eae57153d036e1409201cd73f7)
2026-10-27 10:49:34 +01:00
Alby96andClaude Opus 5.5 e6e69782ed fix(server): a locked audit retention also fixes the audit step and the switch
The audit retention in force ignored the audit clean-up's steps: with the
audit step unticked nothing was deleted, yet Settings › Logs still showed the
age limit. It is now 0 without that step, and setting a limit (Settings › Logs
or CHRONOS_AUDIT_RETENTION_DAYS at start) ticks the step again, so a saved or
fixed retention always takes effect. While the variable fixes a limit above 0,
an edit that drops the step is 409 setting_locked like turning the schedule off.

The admin panel's Scheduled tab disables what the variable fixes (the row's
switch, the form's Enabled and audit step, the age limit) with the locked
tooltip, and points a setting_locked refusal at the field actually refused.

The Copies kept tooltips now say the backups folder keeps as many copies as
the backup schedule that keeps the most; the LastDone and Newest comments
state the real first-copy rule; Keep audit is documented last-writer-wins.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 10:39:49 +01:00
Alby96 3f0e6357b1 fix(server): archive.json on its own timer, a live Scheduled tab in one time zone, schedule audit in words
- SchedulerHost reads archive.json every 10 minutes on its own timer. The archive-scan
  runs that used to do it are skipped while a long scan is pending, and the schedule may
  be off or daily, so uploads kept a desktop's old folder template or proxy size.
- Every schedule change and run, a skipped run included, is published as a
  scheduleChanged event. The Scheduled tab reloads on it, so skipped runs, next-run moves
  and other administrators' edits show without waiting for a job.
- The Scheduled tab still draws when the schedule a job links to, or an expanded one, no
  longer exists: its runs are dropped instead of failing the whole load.
- Every time on the Scheduled tab (next run, last result, runs) is in the server's time
  zone, as its "Times in" line says.
- Audit details name a system schedule after its key (system:<key> · name · ...). The
  dashboard and the Logs page show it by its localized name and the recurrence code in
  words, as the Scheduled tab does. Older entries keep their recorded name.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit c20f573d0bdf1cdcf3a86e9702ac76a4bf9508d9)
2026-10-27 09:57:23 +01:00
Alby96 e384564784 fix: logging never fails a job, one backup retention, first copy after the upgrade
Owner review 2, phase 2 review findings (scheduler core).

- Log.Write caught only IOException. Microsoft.Extensions.Logging wraps
  provider failures in an AggregateException, so a log line that could not
  be written (in tests: the process-wide sink of a stopped server whose log
  folder was gone) escaped JobEngine.RunAsync's catch before the failure was
  stored: the job stayed running and the worker faulted. This was the cause
  of the intermittent JobApiTests/ArchiveModuleTests failures. Log.Write now
  drops any non-fatal sink failure, TeeLogSink keeps a line from the other
  sinks, FileLogSink drops a line it cannot write and reopens the file at the
  next one, and LoggerSink drops what the providers throw. The scheduler's
  loop relies on the same guarantee.
- The daily backup loop (RunDailyAsync, IsDue, Interval, CheckInterval) had
  no caller since the index-backup schedule replaced it; it is removed and
  the DatabaseBackups summary describes the schedule.
- The first copy after the upgrade no longer waits a day (or for 03:00):
  SystemSchedule.LastDone seeds a new row due at once when its work was last
  done a period or more before, and both hosts pass the newest copy in the
  backups folder for index-backup.
- Back up now (Settings and Archive), the copy kept before a restore and a
  backup job that keeps fewer prune to the largest Copies kept of the backup
  schedules (DatabaseBackups.KeptAsync), not a fixed three. The four
  tooltips that promised three daily copies are reworded (en, it) and their
  stale translations deleted.
- New tests for the scheduler loop itself: a tick, Wake, a pass that threw,
  and dispose during a pass.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit c5ad0c4c3f636129afe5dd1ce039185516da5621)
2026-10-27 09:56:47 +01:00
Alby96 422f33d5f3 fix(server): show the audit clean-up's real age limit and lock it before the first pass
Settings › Logs › Keep audit showed ServerOptions.AuditRetentionDays, a second
copy of the audit clean-up schedule's age limit. Edits made on Jobs › Scheduled
never reached it, so the panel could say "kept forever" while entries were
being deleted every night. Saving 0 there then changed nothing, because the
endpoint only compared against the stale option value.

- GET and PUT /server/settings now report the schedule's limit in force (0
  while the schedule is off). Saving compares against that value. A value sent
  back unchanged leaves the server.json reset default and the env lock alone. A
  new value sets the schedule and becomes the reset default.
- ApplyAgeAsync also turns the schedule on when it already holds the days but
  is off.
- CHRONOS_AUDIT_RETENTION_DAYS is now applied before the scheduler's first
  pass, through a new Scheduler.StartAsync overload with a beforeFirstPass hook.
  Before, a missed 04:30 run was caught up at start with the stale days, which
  could delete entries the variable says to keep. While the variable fixes a
  limit above 0, turning the schedule off is a 409 setting_locked.
- Corrected the comments in SchedulerHost, ServerOptions, ServerSettingsStore,
  LogSettingsDto, the header of settings.js and ARCHITECTURE.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 490ed286e9f32745174b13b1963d6ec91955196b)
2026-10-27 09:56:46 +01:00
Alby96 ac121acf7c fix(logs): apply log settings from the first line and name the locking variable
The desktop opened its log files with the default limits and wrote its first
line, which prunes, before Settings › Advanced › Logs were applied. Every start,
and every launch that only hands its file to the running Chronos, deleted logs
older than 14 days and cut the folder to 1 GB whatever the user kept.
AppLogging.Open now builds the sink from the stored settings before that line;
the settings are read again once the launch owns the data folder.

A total below one file deleted each finished file as the next one opened. The
rule now lives in LogFileOptions.TotalBelowFile: the server keeps refusing it,
the desktop raises the total to the file size and its rows no longer offer the
combination.

The desktop log rows threw on negative sizes from an imported or hand-edited
file and showed raw values the files never got; they now show the applied ones.

Upgraded Unraid and compose installs keep CHRONOS_LOG_LEVEL=Information, which
locks both levels. The lock stays; the server now reports which variable fixes
each locked setting (LockedBy), so the panel's tooltip names it exactly and says
to remove it to change the value there. The releases README tells upgraders.

The former-constructor log test no longer fails across midnight UTC.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 8ba7162bd5926d34c5ec4e40e2a2dad063ee19c3)
2026-10-27 09:56:46 +01:00
Alby96andClaude Opus 5.5 8d66be709c fix: one audit retention, scans at start, live deep analysis and a 6-hour upload sweep
Settle what the R10 scheduler and R11 log packages left open when they were
integrated (owner review 2, phase 2).

- Audit retention has one source of truth, the audit-cleanup schedule's age
  limit. AuditRetentionDays defaults to 0 (the audit log is kept forever, so
  an upgrade deletes nothing; the schedule is seeded off) and accepts 0-3650,
  what a schedule's age limit takes. Saving Settings › Logs › Keep audit sets
  the schedule's limit (on with a limit, off at 0) without a restart;
  CHRONOS_AUDIT_RETENTION_DAYS locks it and Reset goes back to it.
- Both hosts scan right after start again, as their polling did: the server
  after the scheduler starts, the desktop once the archive was reopened and
  again when an unplugged one is back. Scheduler.RunSystemNowAsync runs the
  archive-scan schedule when it is enabled and has not run since the start,
  and skips while its scan is pending.
- Desktop scans follow Settings › Analysis › After a scan at every run: a scan
  schedule without its own deep parameter asks the host
  (IScheduleHost.DeepAnalysisAfterScan), the archive-scan schedule no longer
  freezes the setting, and the editor offers deep only for analyses, so the
  setting's tooltip stays true.
- The server's upload clean-up runs every 6 hours instead of every 30
  minutes, to keep the job history readable; idle uploads still expire after
  UploadRetentionHours.
- The Unraid template and docker-compose leave CHRONOS_LOG_LEVEL empty or
  commented out, and say that setting it locks both log levels, so the admin
  panel can change them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 02:51:04 +01:00
Alby96 75daab7275 feat(server): scheduled jobs on the server and a Scheduled tab in the admin panel
Owner review 2, R10: nothing may run out of sight, so every timer the server
ran becomes a system schedule the admin panel shows and manages, and
administrators create their own.

- SchedulerHost runs the shared Scheduler on the job engine (started after
  JobEngineHost, stopped before it); ServerScheduleHost gives it the
  container's time zone (UTC with a warning when TZ is unknown), the archive
  refreshed from archive.json at every run (what ArchivePolling did), the
  clean-up steps and the system schedules: archive-scan every 10 minutes
  (no catch-up, also run once at start like the polling), upload-cleanup
  every 30 minutes, index-backup at 03:00 (SQLite only), housekeeping (job
  history) at 04:00 and audit-cleanup at 04:30.
- ArchivePolling and DatabaseBackupService are gone; UploadMaintenance only
  recovers commits at start, its sweep is the "uploads" clean-up step.
- /api/v1/schedules (ManageArchive, audited): list with actions and time
  zone, create, PUT/PATCH, delete (409 schedule_system), run now (409
  schedule_pending), reset (409 schedule_no_defaults), runs paged by cursor;
  invalid fields are 400 invalid_schedule naming the field.
- CHRONOS_AUDIT_RETENTION_DAYS (AuditRetentionDays, default 365) seeds the
  audit clean-up; set by the environment it is applied at every start and
  locked. Job history leaves Settings: it is the housekeeping schedule's age
  limit, and the setting is what a reset restores.
- Admin panel: Jobs has Queue and Scheduled tabs; schedules with when (in
  the panel's language and the server's zone), next run, last result, a
  switch, Run now, Edit, Delete or Reset, their runs linking to the jobs, and
  a side panel for the action, recurrence and parameters; job rows a
  schedule queued carry a Scheduled pill. Strings in en and it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 808ce94ae29e3bf4522cb4d40dfd76d4f8529c64)
2026-10-27 02:25:01 +01:00
Alby96 e5508e7e69 feat(data): scheduler engine, schedules table and housekeeping jobs
Owner review 2, R10: every timer that queues work becomes a visible schedule,
so the server and the desktop need one shared engine to run them.

- Migration 0007: schedules table (system rows keyed by system_key) and
  jobs.schedule_id; Job.ScheduleId, JobDto.ScheduleId, JobRepository
  HasPendingAsync / ListPendingTargetsAsync / ListByScheduleAsync.
- ScheduleRepository: seeding that keeps user edits, reset, compare-and-set
  claim of a run (one winner across processes), outcomes.
- Scheduling: in-house recurrence (every/daily/weekly/monthly, DST gap moves
  forward, ambiguous time runs once), ScheduleActions resolving scan, verify,
  thumbnails, proxies, analysis, maintenance, backup, cleanup, duplicates and
  orphans into archive jobs, IScheduleHost, and the Scheduler loop (catch-up,
  clock going back, run now, CRUD as API v1 DTOs).
- New job kinds Backup (16) and Cleanup (17) with handlers, shared clean-up
  steps (job history, audit log, trash report that never deletes) and host
  steps through ArchiveServiceOptions; read-only Duplicates and Orphans report
  handlers, so the server can run those kinds too.
- JobEngine no longer purges history at start: the housekeeping schedule's
  job-history step does; JobEngine.CanRun and an EnqueueAsync with scheduleId.
- Protocol DTOs for schedules; job kind names in en and it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit eb0edd2483a493db7c6945d5b494461cabb2a4ad)
2026-10-27 02:08:11 +01:00
Alby96 0e84392f4f feat(logs): log level, retention, size limits and rotation on server and desktop
Owner review 2, R11 asked for more log settings. The file sink now writes daily or
hourly files, continues a full file in numbered parts and prunes by age and by the
total size (never the file being written); its options change while it runs.

Server: the file and console levels are separate and read by the logging filters
at every line, so the admin panel's new Logs group applies without a restart; the
engine's level follows the lower of the two. This also fixes a bug: the file logger
was fixed at Information, so CHRONOS_LOG_LEVEL=Debug or Trace never reached the
files. New variables CHRONOS_LOG_CONSOLE_LEVEL, CHRONOS_LOG_RETENTION_DAYS,
CHRONOS_LOG_MAX_FILE_MB, CHRONOS_LOG_MAX_TOTAL_MB, CHRONOS_LOG_ROTATION,
CHRONOS_AUDIT_RETENTION_DAYS and CHRONOS_DIAGNOSTICS_LOG_MB lock their settings like
the others; the diagnostics zip keeps the configured share of each log.

Desktop: Settings > Advanced gains Log level, Keep logs, File size, Logs total,
Rotation and Diagnostics logs, applied at every save; Advanced's Reset section
restores them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit cc875784e4952ee0e4c807b9d9c18496d3d5a8c3)
2026-10-27 02:08:09 +01:00
Alby96andClaude Opus 5.5 1f089888e8 feat: owner review 2 phase 1: :latest, Unraid array space, Settings with About, whole-folder import (#9)
CI / Build and test (push) Successful in 5m11s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 6s
Release / Build, test and publish (push) Successful in 8m57s
CI / PostgreSQL 16 integration (push) Successful in 3m10s
CI / PostgreSQL 17 integration (push) Successful in 3m30s
CI / Docker image (push) Successful in 49s
Release / Server image (push) Successful in 1m4s
- :latest follows the highest stable release, or the highest pre-release while none is stable (Chronos.Tools release-channels); bad tags are refused before anything is built.
- Unraid: CHRONOS_SPACE_PATH and the template's Array view show the array's free space; the write volume (cache) is shown apart; completions check the archive volume (507).
- Settings is a gear, docked at the foot of the admin sidebar; About is the last part of Settings on the desktop and the panel.
- Import > Folder > Whole folder: one sequence per format (desktop only).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com>
2026-10-27 01:09:59 +01:00
Alby96andClaude Opus 5.5 f2b58522b9 refactor!: rename Titano to Chronos and move CI and releases to Gitea (#6)
CI / Build and test (push) Successful in 8m14s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 7s
Release / Build, test and publish (push) Successful in 13m19s
CI / PostgreSQL 16 integration (push) Successful in 4m49s
CI / PostgreSQL 17 integration (push) Successful in 5m28s
CI / Docker image (push) Successful in 53s
Release / Server image (push) Failing after 10s
The owner renamed the product and moved the repository to the self-hosted
Gitea (https://gitea.encke-hake.ts.net/BalboSoft/Chronos) for more control,
and asked for Actions and a first automatic release with the server package
and the Windows exe (docs/requests/2026-10-23-chronos-gitea.md).

- Chronos everywhere: a byte-exact rename of contents and paths, then a
  per-language review of the forms the old name's ending had dictated.
- Gitea instead of GitHub: the update check, licence, issue and support
  links read ChronosReleasesUrl; the update check takes the highest stable
  version, offers a pre-release build its final release and reports a
  repository it cannot see as a failed check. EULA, security policy and
  Gitea issue forms live at the repository root.
- Gitea Actions for the Linux act_runner (.gitea/workflows): CI, release,
  nightly image and performance gates in the .NET SDK container with git
  checkout and the system SQLite. The release cross-compiles the Windows
  programs, checks their icon, version and DPI manifest, packs installers
  and zips, publishes the Gitea release and pushes the server image
  (REGISTRY_TOKEN). Windows-only tests run in an opt-in job on a Windows
  runner (WINDOWS_RUNNER).
- New Chronos.Tools commands: zip, gitea-release, postgres-ci (replaces the
  docker-exec script, which Gitea's service containers do not allow; the
  throw-away server runs without durability) and pe-check.
- Timed tests take their budget from TestTiming (CHRONOS_TEST_TIME_FACTOR,
  3 on the shared runner; the weekly performance gates keep theirs).

BREAKING CHANGE: programs, settings, data folders, file types, environment
variables and the Docker image use the new name; nothing is migrated from
Titano, which never had a release.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com>
2026-10-23 12:45:18 +02:00