A server import stages its copies in this PC's cache folder, yet a full disk
there read 'The destination is full.' beside every photo, and a refused
write 'Titano may not write to the destination.', which sent the user to
the server. IImportSink.StagesOnThisPc (true for ServerImportSink) selects
Import.Failed.CacheFull and Import.Failed.CacheAccess instead.
A failed archive import job showed the job engine's raw text (SQLite, file
system or framework English) as the Import screen's line. ImportFailures.Job
keeps the archive engine's own localized sentences and shows 'The import
stopped before the end.' for anything else; the raw text stays in the
tooltip and the logs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A reply that is not the server's JSON (a reverse proxy's 502 page while the
container restarts, its 413 for a large body, a bare 500) reached the Import
screen as the HTTP reason phrase, in English, beside every photo. ErrorText now
uses an ApiError's message only when the server wrote it (a code that is not
TitanoClient's http_<status> fallback) and otherwise says what the status means:
too large, rate limited, not answering (gateway and timeout statuses) or a
server error. A card file that cannot be read while planning is listed with the
executor's catalog sentence instead of the system's text and full path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A photo the executor could not copy now carries one localized sentence
(ImportExecutor.FailureText: its own checks, a full destination, access
denied, else "The photo could not be read or copied.") on the Import
screen and in the import job's log. The photos a stopped folder or
server import never reached show the stop's cause (ImportFailures.Stop:
the server's own sentence, not answering, untrusted certificate, card
gone, destination full or not writable), and a failed index check reads
"The index could not be read or written.". A refusal without words
reads as the catalog's sentence. The system's text stays in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The server publishes one account's card progress at most once a second
(sooner reports are taken and dropped) and at most 120 card events of an
account a minute (429 rate_limited beyond), so an upload-only account
can no longer push job and sequence events out of every client's queue.
On the client, the end of a card import waits at most two seconds for
its reports to reach the server, then cancels whatever is still on its
way, so a cancelled import or one that lost its server ends at once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Archive: picking another archive while the screen was reading kept the old
archive's tree and figures while Scan, Verify and the set actions targeted the
new one, and reloads asked for during a read were dropped. A load requested
during a read now runs once more after it, a read whose archive is no longer
picked shows nothing, and a new pick clears the tree and the online state
until the picked archive is read.
- Import: a job that ended before the screen recorded its id (a destination
gone offline) left the screen copying forever; its state is read back once.
A replaced import result is disposed, so it no longer stays alive through the
language event with its whole plan.
- Library: the timeline's month readouts are made again on a language switch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Error toasts showed the exception's own message, often technical English from
.NET or the OS, under a translated title. The editor's failed save, a job posted
to the server from the Library, and the card check or delete after an import now
say why in one catalog sentence: what the server answered or that it does not
answer, that the card left, is locked or a file could not be read, and the
archive causes of ArchiveFailures for a local save. The details stay in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Four App tests switched the process-wide UI language inside parallel classes, so
another class's English assertion, or its constructor's reset to English, could
land in the middle of them; they now live in the serial ArchiveLanguageTests and
ImportLanguageTests. The App and Core test programs fail a test that leaves
English outside a serial class at the switch, through the new
TestContext.Current and TestContext.IsSerial.
The FrameWindow cancellation test counted unobserved task exceptions while other
classes ran beside it; it moves to the serial FrameWindowIsolationTests, and both
unobserved-exception tests drain the finalizer queue before they start counting.
The runner unwrapped TargetInvocationException only around the test method: a
skip or an assertion thrown by a test class constructor or field initializer was
reported as a failure reading "Exception has been thrown by the target of an
invocation". Constructors are unwrapped the same way now. TestRunner.Discover(Type)
and ExecuteAsync are public, so Tools.Tests checks the runner with nested fixtures.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §14.3 lists cardEvent among the WebSocket events, but the server had
none. A client importing a card into the server now reports its start,
progress (at most once a second, a report still waiting replaced by the
next) and end to the new POST /api/v1/uploads/cards (Upload permission;
import id, card name, state, done, total, failed), and the server publishes
a CardEvent naming the account and client to every connected client; the
protocol client parses it and offers ReportCardAsync. A report that fails is
logged and never stops the import; a server without the endpoint gets no
more reports (SRS-10).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
With sizes in the language's units, the left-to-right number cells of the Import
tables and the Jobs speed and time-left columns put the unit after the number on
screen, so an Arabic or Hebrew reader met the unit first ("18,6 كيلوبايت"), and the
fixed column cut the longer word off. These cells and their headers now follow the
reading direction at the end of the cell, and the Import size columns size to their
content; bare numbers (percentages) stay left-to-right islands.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The formatted-text estimate ignored the numeral and formatting options the
cells use and called a fully shown session time cut; a probe TextBlock with
the same properties is measured instead. The CI screenshot shows the times
whole at 1200 px.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Logic tests for failure mapping, the folder path in replanning, nickname-less
cards, entry tooltips, left-to-right paths and the right-to-left session
arrow; the smoke test runs every state at 1200 x 788 and checks names on
every button, uncut session times and Show plan names, aligned headers, the
folder path error only for Folder with its status action, four-digit number
boxes, disabled devices with their reason, live regions and the locked form
after an import, plus a right-to-left pass in Arabic.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Union of the Tooltips resources; sample data keeps the sync server and the
simulated cards; the import test names App.Infrastructure.Formatting fully now
that a test namespace of the same name exists.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- a card that leaves needs a new check; formatting re-lists the card and refuses
one that changed since its check; files that are not photos are named in the
format confirmation
- an import never stays stuck in Running; Retry never resumes an older job
- server imports list refused files and keep what was uploaded when stopped
- the archive result matches each copy to its job's record and shows the job's
own error per file
- refreshing devices keeps typed titles and choices; titles lock while copying
- three destination names, merge and split of sessions, camera profiles shared
by the cards of a camera, photo counts and a new-card toast
- disabled controls say why; keyboard focus follows the nickname field and
Show plan (Esc closes it); label column fits longer languages
- capture states for insertion, running, failed and a new card
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §13 camera profiles: the settings saved last by another card of the same
camera model; a card seen for the first time takes them once its first plan
names the camera. Remembered cards without settings start from the archive's
templates.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Re-listing the devices no longer re-plans the card of a running, failed or
finished import, so a removed card can resume its job after re-insertion and
the verification result stays after ejecting. The source list and profile
edits are locked while an import runs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Import (cards and folders): the card pool with remembered profiles and the
nickname field for new cards, the form (destination, scan, sessions, names
with live preview and tokens, duplicates, after-import choices), the plan
panel with editable session titles, Show plan, the archive import job or
the folder/server run with progress, the verification result and the
after-import actions (dry run, delete, format through the Windows dialog,
eject, open in Library), card-insertion toasts, automatic import into the
archive and resume after re-insertion. Deep analysis after import is queued
with ProcessingJobs at background priority.
Archive manager: archive picker, tree with availability, figure tiles and
charts, mass operations on the selected set, scan/rebuild (dialog)/verify/
duplicates/orphans/adopt/maintenance as jobs, and the maintenance view with
index health, recent runs and the duplicate and orphan reports with safe
fixes.
--capture renders import-<state> and archive-<view> from a simulated card
and sample reports; en and it resources for both screens.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Plain classes behind the Import and Archive screens: plan totals, session
rows and the Show plan listing; duplicate and title choices without a new
scan; folder and server destinations with the protocol client's chunked,
hash-verified uploads; the after-import gate that allows deleting or
formatting a card only after a verified archive import and a dry run; the
archive tree, chart aggregation, mass rename/retag and maintenance reports.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC