A render queued before the editor had seen frames inserted under it (a sync
download, an import of earlier photos, a scan without an event) embedded the
project's positions in the old frame order. Render now checks first that the
frames read are still the sequence's (ISequenceSource.FramesCurrentAsync: the
row's frames version on this PC, the manifest on a server). On this PC the
sequence is read again and the positions follow the frames; a server
sequence whose frames changed turns outdated and the render is not queued.
Reads of the sequence no longer overlap: a read waits for the one under way,
saves that meet new frames read them through the same slot, and they save
the project as it is once its positions followed. The frame on screen stays
on its photo when frames are inserted or removed before it.
Tests: the event-loss test waits for the listener's subscription before
dropping the stream, and the conflict tests flush once more after the
choice when a retry started before it was still failing.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A read of the open archive's settings that an Archive row edit overlapped
was dropped and left to the edit's end, so a folder change could complete
while the rows still showed the previous archive. The read now waits until
no edit is being written and reads again, so the retarget and the reload on
showing Settings are done only once the rows show what the archive holds.
A smoke test edits a row while Settings reads the archive, with the
settings lease held elsewhere.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The desktop editor of a server sequence relied on the server's
sequenceChanged event to go read-only when frames changed. Scans publish
none, and an event missed while the socket reconnected was never noticed,
so a save made meanwhile passed the settings-version check and wrote
positions in the old order over the ones the server had moved.
The PATCH now carries expectedFramesVersion, the frames version of the
proxies the editor holds. On 409 the editor reads the manifest: other
frames make it outdated (read-only, Get proxies; the edit stays pending),
the same frames at a new version retry at that version. After a lost event
socket the frames are compared again. Servers that predate the field
ignore it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
An editor open on a sequence of this PC while earlier photos arrived (a
sync download, an import, a scan) kept its frames and positions in the old
order, while the index moved the stored positions with their frames. The
next edit of exclusions, the hero or keyframes was merged as the editor's
own value and stored in the old order, so other photos were excluded and
the Library's hero and the project's named different frames.
LocalSequenceSource records the frames version it read the frames at (row
and frames read as one state) and refuses a save under the sequence lease
when the row's frames version moved (FramesChangedException); the index
edit also names that version. EditorSession then reads the sequence again
and moves its project, its basis and every undo and redo step the way the
index moved the stored copy (ProjectSettings.FollowFrames: by frame id when
frames were only inserted, otherwise unchanged; waiting photos placed),
and saves in the new order. A read after a job follows the frames the same
way, and saves wait for a read under way.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A server import stages its copies in this PC's cache folder, yet a full disk
there read 'The destination is full.' beside every photo, and a refused
write 'Titano may not write to the destination.', which sent the user to
the server. IImportSink.StagesOnThisPc (true for ServerImportSink) selects
Import.Failed.CacheFull and Import.Failed.CacheAccess instead.
A failed archive import job showed the job engine's raw text (SQLite, file
system or framework English) as the Import screen's line. ImportFailures.Job
keeps the archive engine's own localized sentences and shows 'The import
stopped before the end.' for anything else; the raw text stays in the
tooltip and the logs.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings › Archive reads archive.json without the settings lease each time it
is shown and after a waited edit. On a slow share such a read could return
the file as it was before a template, proxy or thumbnail edit that was being
written, then put the old value back on the row and in this PC's defaults
while the archive kept the edit. ArchiveReadGate now drops a read that
overlapped an edit being written; the rows are read again at once, or when
the last edit being written ends.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Uninstalling (or an upgrade dropping a program) deleted the client's or the
Uploader's Run value but left its StartupApproved\Run value behind. A moved
entry keeps that state, so an entry the user turned off stays off.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The Uploader runs for the whole sign-in session and read its sign-in
entry only at start, so an entry Task Manager turned off meanwhile still
showed as ticked. Opening the settings panel now reads it again.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
AppEnvironment now carries AppPaths.SyncedFolder: when the per-user data
folder itself lies in a OneDrive sync root, Titano still starts (nowhere
is safer), logs it and shows the error toast "Data inside OneDrive" with
Open, instead of the false "Data kept outside OneDrive". The latter now
needs PortableSyncRoot (renamed from the old SyncedFolder meaning).
A portable copy now in a OneDrive folder whose .\data still holds an
index or settings.json gets that folder named in the log and in a toast
("Earlier data unused", with Open). Nothing is moved or deleted.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
GET /api/v1/archive/settings refreshes the served archive from
archive.json first, so the admin form (which saves every field) starts
from a desktop's change made since the last poll instead of writing the
old templates back. ServerArchive.RefreshAsync replaces the served
archive only when the refresh registered a change, and only through a
compare-and-swap against the archive it read, so a poll racing an
admin's PUT no longer puts the pre-edit row back for ten minutes.
RefreshSettingsAsync now ignores an archive.json a newer Titano wrote,
as documented, instead of registering what this version reads of it.
AppServicesTests now points the folder at an archive the index does not
list first, and checks that the archive no longer chosen gets no scan.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A retarget now returns the archive registered at its own folder, not at
the folder current when it finishes, so an edit made while folder A opens
no longer lands in the archive of a folder B chosen right after. The rows
and _archive follow only the latest folder; Reset section pushes to the
archive it asked about and reloads the rows when the folder changed. A
newer sidecar met while opening no longer faults the retarget silently:
it is reported like any open failure. The smoke test now waits for the
empty-folder retarget before editing, so the archives[0] fallback would
fail it, and covers the two-folder race.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The Jobs screen's flush could take a render's end before the editor that
followed it had seen it, and announce it without the output file. It now
yields while the open editor follows that render (FollowsRender); an editor
closed in between still says it once, without the output.
Open on a job over more sequences than a Library page (a maintenance run over
a whole archive) now opens the Library as it is instead of looking every
target up and paging through the list to select them all. Selecting many
cards (Open's selection, Clear selection) counts the selection once instead
of once per card over every card.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Picking archive A, then B, then A again before B's read ended left A's read
marker set while its tree and figures were already cleared: Rebuild, Scan,
Verify and Maintenance were enabled and the rebuild dialog counted 0
sequences. ForgetRead now clears the marker too.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A reply that is not the server's JSON (a reverse proxy's 502 page while the
container restarts, its 413 for a large body, a bare 500) reached the Import
screen as the HTTP reason phrase, in English, beside every photo. ErrorText now
uses an ApiError's message only when the server wrote it (a code that is not
TitanoClient's http_<status> fallback) and otherwise says what the status means:
too large, rate limited, not answering (gateway and timeout statuses) or a
server error. A card file that cannot be read while planning is listed with the
executor's catalog sentence instead of the system's text and full path.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- While the open archive's archive.json cannot be read, the rows show the index's templates and proxy size and the
thumbnail size stays this PC's: the stand-in 320 no longer replaces the default of new archives. Settings ›
Archive loads through RefreshSettingsAsync, so opening it also brings the index up to a change made elsewhere.
- With no archive folder the rows edit only this PC's defaults, never the first archive of the index.
- An Archive row edited (or Reset section) while the archive at a just-chosen folder is opening waits for it and
goes to that archive (or stays a default when the folder holds none), instead of being undone when it opens.
- A portable copy whose data had to leave its OneDrive folder says so at start, with Open on the data folder.
- Opening Settings re-reads Start with Windows, which Task Manager may have changed meanwhile.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
BRIEF §6.2 forbids a SQLite index in a synchronised folder. AppEnvironment.Detect now resolves the data folder
through Core.Windows' AppPaths and OneDriveFolders: a portable copy whose .\data would lie under a OneDrive sync
root (a OneDrive folder, or a Desktop or Documents folder backed up into one) keeps its data in
%LOCALAPPDATA%\Titano and stays portable otherwise; AppEnvironment.SyncedFolder names the OneDrive folder so the
user can be told. The pure choice lives in Core/IO/DataLocation (tested on Linux); reading the OneDrive accounts
key no longer fails start-up when it cannot be read.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Task Manager's Startup tab keeps the Run value and writes a StartupApproved\Run value whose odd first byte means
off. The client and the Uploader now show such an entry as off; ticking the box removes the marker so the entry
runs again, unticking removes it with the Run value, and re-pointing the command after an update leaves it as it
is. Core/IO/StartupApproval holds the rule; the registry hive is injectable for tests.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- The desktop's rescans run for the whole session and each one targets the archive at Settings › Archive's folder
(as the Import and Archive screens do), so an archive created on the first run, chosen in Settings, relinked or
imported with settings is rescanned from the next tick on, and Rescan every always reaches a live timer. The
folder of the start is reopened (relink, interrupted renames) as soon as its archive.json is there, so an
unplugged drive or a folder without an archive no longer stops polling for the session.
- ArchiveService.RefreshSettingsAsync reads archive.json and registers the archive again when its name, templates
or proxy size changed elsewhere (a server's admin panel, another PC); null when the file cannot be read, is newer
or belongs to another archive. Desktop rescans and the server's polling call it first, so imports, uploads and
the admin panel follow the shared settings without a restart.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A finished render's toast is claimed once (JobsViewModel.ClaimRenderToast):
the editor that followed the render to its end says it with its output,
also when the sequence cannot be read again (then without Show in
folder) or the editor closed meanwhile; any other render is said by the
Jobs screen. Before, the Jobs screen stayed silent whenever an editor had
the sequence open, so a failed reload or a render the editor did not
follow ended without a completion toast.
Open on a job over several sequences (toast, Windows notification, Jobs
row) shows the Library with every one of them selected, clearing a
search or filter that hides one and reading pages until each is listed,
instead of opening the first in the editor.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Picking another archive, or the shown one leaving the index, now also
clears the previous archive's tiles, charts, last scan, recent runs and
rail badge until the new one is read, so a slow probe or a failed read
never shows them under the new archive's name.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
A photo the executor could not copy now carries one localized sentence
(ImportExecutor.FailureText: its own checks, a full destination, access
denied, else "The photo could not be read or copied.") on the Import
screen and in the import job's log. The photos a stopped folder or
server import never reached show the stop's cause (ImportFailures.Stop:
the server's own sentence, not answering, untrusted certificate, card
gone, destination full or not writable), and a failed index check reads
"The index could not be read or written.". A refusal without words
reads as the catalog's sentence. The system's text stays in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Moving the test into ArchiveLanguageTests turned "" into a raw,
invisible U+200F, so the line read as Assert.Contains("") and GitHub
flagged the file for hidden bidirectional text.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
RemoveLeftovers deleted every Titano or Titano Uploader Run value that
started a file the upgrade removed, including a client or Uploader the
new version only renamed or moved. The new program then found no entry
to follow and Start with Windows was silently off. Setup now points such
an entry at the program of the same component in the new payload (its
shortcut target), keeping the options and the value name, and removes
it only when the component is no longer installed. Uninstall still
removes the entries of the programs its log lists.
StartupCommand.StartsFrom, left over from the superseded folder-scoped
cleanup, is gone; StartupCommand.Retarget replaces it and its misleading
test now covers how setup moves an entry.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The single-instance test ran the second launch with Task.Run and waited on it. A task waited on before it starts
may run inline on the waiting thread, which owns the instance mutex, and a mutex lets its owner in again at once,
so the "nobody exits in time" check could see the launch get its turn. The launches now run on dedicated threads.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The service steps were only checked against in-memory records and registry copies. On an elevated runner the test
registers two throwaway demand-start services through the Service Control Manager, one starting a program of the
install folder and one of another folder, and checks that setup finds only the first, prunes it, and leaves the
second registered.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The running Titano listens for later launches as soon as it holds its data folder's mutex and keeps what arrives
until the window can take it, so a double-clicked .titano during a slow start is opened instead of dropped after
3 s. When the main window closes it stops listening (the mutex stays until the services have stopped), so a later
launch gets no answer and, instead of exiting, waits up to 30 s for the closing instance to exit and starts in its
place with the file. A mutex created by a Titano running with administrator rights no longer crashes a normal
launch: it counts as another instance and the launch exits quietly.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Services, sign-in entries and shortcuts are matched against the full paths of the files the install log or the
payload lists, never against everything under the install folder: an install into a shared folder such as D:\Apps
or /DIR="C:\Program Files" no longer stops, starts or deletes other vendors' services or removes their Run values.
The elevated step now takes the names the unelevated setup found (/SERVICES=... /NAMES=...) and reads each service
again, acting only when it still starts a program of the folder's log or of its own payload (or, for Prune, a
program of the folder that is gone).
Programs are asked to close before any service is touched. On uninstall the services are deleted only once the
programs have closed, just before the files go; a failed install or uninstall starts again the services it
stopped, and after an upgrade setup starts exactly the services it stopped, whatever their start type.
The Server component installs only for all users in a folder inside Program Files. In the window a custom folder
outside it is invalid while the Server is selected, with a tooltip saying why; silent mode refuses it. An upgrade
of an installation elsewhere cannot add the Server, and one it carried is dropped with its service.
Sign-in entries use StartupCommand (the same file as on fix/shell-notify) and are removed by
SetupRegistry.DeleteStartupEntries only when the client's or the Uploader's value starts a program the install log
lists; an upgrade that drops a program removes its entry too. StartupEntries is gone.
A shortcut that starts another product's existing copy is still left alone but now logged; uninstalling the
product it starts hands it to another product of the same scope that lists it and has the same program, so the
Uploader that stays keeps its shortcuts. Another registered Titano installation whose folder or log cannot be read
now counts as using every program's data, so "Remove my data" never offers it.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The sample app shows a display path as its archive folder, and Settings › Archive edits only the archive at the
archive folder (never another one of the index), so the test points the folder at the archive it changes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Any failure of the informational PRAGMA compile_options probe is logged
and gives an empty list; before, anything but a SqliteException was cached
by the lazy value and rethrown by every later open.
Tests now cover the decode-tier fields end to end: the Library's
preview-only chip and its plural tooltip, server cards and frames carrying
previewOnlyCount and the preview size over the API.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Texts that count with participles or adjectives still put a bare number in
front of a word that agrees with it in Italian, so one failure read "1 non
riuscite": the import result and its Done toast, the archive health line and
the thumbnail and import job log lines. They now read as labels in English and
Italian ("Copied: 40 · failed: 1"), like the scan and verify log lines; their
old translations leave the other 36 catalogs until the next translation pass.
The uploader's progress keeps the mockup's English and uses labels in Italian,
and the admin dashboard's upload total no longer agrees with the number.
`i18n check` now also fails on an English text that tallies two or more counts
with participles or adjectives. A single "{0} failed" is left alone, since the
placeholder there is as often a name or a size as a count.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Editor: a failed save showed what the server or the archive layer would say
for the exception's type, so the editor's own sentences were lost: frames
changed on the server or settings changed elsewhere read "The server does not
answer", a read-only account or a gone sequence "Something went wrong". These
failures are now EditorException (an IOException; ProxiesOutdatedException
derives from it) and the toast shows their sentence as it is. A project
written by a newer Titano is reported with the same sentence as a corrupt one
instead of the parser's English text.
- Library: a job posted to a server whose certificate changed since sign-in
threw out of the action unreported; the pin's refusal now reaches the error
toast ("The certificate was not trusted").
- Archive: picking another archive forced it offline until it was read, so the
rebuild dialog called it offline with the previous archive's count, and
disabled commands said the archive must be online. What was read is now kept
apart from availability: until the picked archive is read, Rebuild and the
online commands wait and say so, health fixes and search results of the
previous archive are cleared, and a running search is cancelled.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Index restore (ENG-06, UI-09):
- A staged restore now runs on the files before the index is opened, so it also
recovers an index that no longer opens; Settings > Advanced > Restore works
without an open index (the current one is shown as unreadable).
- The staged copy passes PRAGMA quick_check (before migration, in a scratch copy)
ahead of any backup: a damaged copy is set aside as .failed and never renews the
daily copies. The index it replaces is kept as a VACUUM INTO copy, or, when it
cannot be read, copied whole with its WAL as titano-replaced-<stamp>.db outside the
rotation. The staged file is renamed over the index, so it is never applied twice.
- Archive > Maintenance gains Restore database..., which opens Settings > Advanced.
Archive settings (UI-03, ENG-03):
- An archive.json with an empty or overlong name (drive roots) can be edited again:
the name read is made usable as at creation.
- Proxy and thumbnail sizes outside the presets (an admin's 3840) are listed and
shown with their number.
- Changing the archive folder retargets the rows: an archive there is registered
and rescanned; with none, the rows edit only the defaults of new archives. The
rows never fall back to another archive of the index.
- Reset all and Import settings no longer rewrite the shared archive.json; Archive >
Reset section asks first, naming the archive.
- PUT /api/v1/archive/settings: 409 archive_busy on a lease conflict, 409
archive_manifest for a damaged, newer or foreign archive.json (was 500).
Parallelism (UI-02):
- Auto is the job engine's default, half the logical cores (BRIEF 14.6), with each
job's own decode and analysis threads; a value the user sets is the number of
workers and caps those threads. The memory budget is shared: each job's frame
window gets budget / workers.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The server publishes one account's card progress at most once a second
(sooner reports are taken and dropped) and at most 120 card events of an
account a minute (429 rate_limited beyond), so an upload-only account
can no longer push job and sequence events out of every client's queue.
On the client, the end of a card import waits at most two seconds for
its reports to reach the server, then cancels whatever is still on its
way, so a cancelled import or one that lost its server ends at once.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Toast.RunsFromNotification: a click on a Windows notification restores the window and runs the toast's
action only when the toast opts in (card detected: Import; interrupted import: Resume; job finished: Open;
navigation to Import or Jobs) and it is the only notification shown since the icon appeared. Cancel, Undo
and Retry stay in the window, and the notification text no longer offers them.
- Job endings are coalesced: finished jobs of one kind wait until no job of that kind the user waits for is
queued or running, then one toast says how many finished ("12 jobs finished", action Jobs); failures of one
update share one toast. Server > Upload all no longer raises one toast and one notification per sequence.
- Every failure that is not upkeep (scan, thumbnails, proxies, light analysis) is announced, including move,
adopt and user downloads; finished moves and adoptions are announced too.
- Rail badges: Library counts the sequences with warnings (the Warnings filter), refreshed after analyses;
Archive counts the index health lines that need attention.
- Tests: the balloon click path, the --minimized restore to a saved maximised window, batch and failure
coalescing, and the new badges.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
The client's HKCU Run value now counts as on only when it starts this executable, so a portable copy, a
second install or a development build no longer shows the box ticked, and starting one no longer rewrites the
entry to itself. Refresh only follows an entry whose program an update renamed in this copy's folder, and
unticking removes only this copy's entry. Portable copies keep the choice in memory and hide the Startup row,
since they leave nothing in the registry.
The uninstaller removes the client's and the Uploader's sign-in entries when they start a program of the folder
it removes. StartupCommand in Titano.Core holds the Run key, the value names and the command parsing shared by
both.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Loc.SetCulture stores the new culture before it raises CultureChanged, so the
guard's exception left the process in the other language until the offending
test's own cleanup ran, or for good, and the parallel classes asserting English
failed beside it. Both test programs now restore English first (the switch back
passes the guard) and then fail the test, naming it and the language it chose.
LanguageGuardTests runs a non-serial fixture through the runner and checks the
failure message, that English is back and that later listeners only hear of
English.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Setup registered .titano with Titano.exe "%1", but nothing wrote such a file
and Titano ignored the argument (BRIEF §18).
- Core ProjectBundle: versioned UTF-8 JSON ("titano-project", format 1) with
the archive (id, name, path), the sequence (id, folder, title, frame
count) and the project settings as project.json holds them; newer or
foreign files are refused, frame positions apply only to the frames they
were saved for, saving never replaces an earlier file.
- Data ProjectBundles: the file for a sequence of the index, and the sequence
a file names (by id, else the same folder of the same archive).
- Editor: "Save project file" on the Export tab (sequences of this PC's
archives); opening a file shows its sequence and applies the settings as
one undo step with an Undo toast, or says in one sentence why not (not in
the library, unreadable, a job runs).
- Titano.exe opens its file argument once the index is open and runs once
per data folder: a later launch hands its file over a current-user named
pipe, lets the running window come to the front and exits.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Windows services whose program lies in the install folder (Titano.Server
--install-service) are found in the registry and, through the Service
Control Manager, stopped before files are replaced (they join the
"programs running" prompt), started again after an upgrade that stopped
them, deleted when an upgrade drops their program and on uninstall. An
unelevated setup runs that step in an elevated copy (/SERVICES=...).
- The Server component installs for all users only (manifest allUsersOnly):
choosing it moves a new install to Program Files and disables "Just me"
with the reason; a per-user install cannot take it.
- Uninstall removes every HKCU Run value that starts a program in the folder
(the Uploader's "Start with Windows").
- A shortcut that already starts an existing program elsewhere is neither
retargeted nor logged, and a logged shortcut is deleted only while it
still starts a program of this folder, so the two products no longer
remove each other's "Titano Uploader" shortcuts.
- "Remove my data" lists and deletes only the data of this product's
programs that no other installed Titano product uses (the desktop app and
the Uploader share %LOCALAPPDATA%\Titano and its logs folder).
- The .titano file type is named in setup's language (Setup.FileType.*).
Setup tests run in Titano.App.Tests on Windows CI.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
- Archive: picking another archive while the screen was reading kept the old
archive's tree and figures while Scan, Verify and the set actions targeted the
new one, and reloads asked for during a read were dropped. A load requested
during a read now runs once more after it, a read whose archive is no longer
picked shows nothing, and a new pick clears the tree and the online state
until the picked archive is read.
- Import: a job that ended before the screen recorded its id (a destination
gone offline) left the screen copying forever; its state is read back once.
A replaced import result is disposed, so it no longer stays alive through the
language event with its whole plan.
- Library: the timeline's month readouts are made again on a language switch.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Error toasts showed the exception's own message, often technical English from
.NET or the OS, under a translated title. The editor's failed save, a job posted
to the server from the Library, and the card check or delete after an import now
say why in one catalog sentence: what the server answered or that it does not
answer, that the card left, is locked or a file could not be read, and the
archive causes of ArchiveFailures for a local save. The details stay in the log.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC
Settings (UI-01, UI-02, UI-03, UI-09, RF-4):
- New Import, Analysis and Formats pages, in the order of Settings.html. Import holds
the defaults of new cards (session rules, subfolders, verification, duplicates,
after-import actions); Analysis the deep-analysis width cap, night and star-field
thresholds and deep analysis after import or scan; Formats the decode tier of every
format on this PC with a notice and Store install link per missing codec extension.
- Archive gains thumbnail size and rescan interval; its templates, proxy size and
thumbnail size are the open archive's own (archive.json) and new archives' defaults.
- Rendering quality, parallelism and background priority now drive the jobs: quality
maps to preparation size, read-ahead and default flow quality; parallelism sets the
engine's workers live and caps per-job threads; background priority raises the UI
thread while Titano is in front.
- Advanced gains Restore (daily backups, dry-run summary, destructive confirmation,
staged for the next start) and Reset all.
- The naming preview's sample title is a catalog string.
Engine (ENG-03, ENG-04, ENG-06):
- ArchiveService.GetSettingsAsync/UpdateSettingsAsync rewrite archive.json atomically
under a lease, then the index row; the server endpoint and the desktop use them, and
the desktop creates archives with Settings › Archive. ThumbnailPolicy in archive.json
sizes the thumbnails.
- DatabaseBackups: daily VACUUM INTO copies kept x3 on the desktop and on a server on
SQLite (DatabaseBackupService), staged restore checked and preceded by a fresh copy.
- Maintenance vacuums the SQLite index when 10 % or more is free (dry run reports it).
- JobEngine.SetWorkers; ProcessingOptions.Tune applies host tuning per job.
Archive setup toasts say why in a localized sentence (RF-1).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_012iLMBNwBE2GnphAsu4cjaC