Commit Graph
5 Commits
Author SHA1 Message Date
Alby96andClaude Opus 5.5 8ea25228eb fix(convert): reserve the photos still writing, keep photo ids out of the job row, never copy a source twice
Stage A's space guard reserved, before each photo, only that photo and the
ones after it, so at the end of a sequence it counted a single photo while
up to twice the parallelism were still converting: a volume filling
meanwhile could go into the reserve. It now reserves the photo and every
photo started whose converted file has not landed yet (a file lands whole,
by a rename, before it is verified), so nothing in flight is missed and
nothing landed is counted twice, at the end of a sequence as anywhere.

The confirmed photo ids (about 21 MB for a million photos) lived in the
job's parameters, read by every dry run's busy check, by each sequence turn
of the conversion and by the job lists. They are now written whole, under a
job id chosen before the job is queued, into convert-<job>.photos beside
the journal, and go with it; the row keeps each sequence's digest, so the
job still converts exactly the photos confirmed (without the file, the
whole plan made again must match). The busy check reads only ids, kinds and
targets (and a verify's parameters), never the asking job's row; a
conversion's turn reads only its creation time; the server's job list and
dashboard and the engine's queue peeks read jobs without parameters.

A retried New sequence conversion could make a second copy. The journal now
names the copy as soon as its photos are filed; a retry finishes that copy
whatever changed in the source since, never remakes one deleted since, and
needs no space again for what it holds; and a source another conversion
copied in the same format after this one was confirmed is done with, with
no copy made (new outcome Superseded, with its job log line).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-11-03 09:36:00 +01:00
Alby96 c669d0504d fix(convert): the job converts exactly the photos its preview listed, once
A conversion job could still do something its confirmed dry run did not show,
or refuse what it should have converted:

- An upload landing between the confirmation and the sequence's turn made the
  sequence Changed at every retry. Each ConvertSequence now names the photos
  the plan converts (Photos, their frame ids); the job takes those from its
  re-plan, checks their content against the confirmed digest and leaves photos
  that came in since as they are. A photo the plan did not list is never
  converted, whatever changed on disk or in the index since the dry run.
- A file another program held during the dry run was planned as Missing and
  then converted or not depending on the re-plan. It is now its own reason
  (inaccessible, "held open or cannot be opened"); a truncated file reads as
  undecodable. At job time a confirmed photo that cannot be opened leaves the
  sequence Blocked for the retry; a held photo the job does not convert does
  not hide a real change.
- The same sequences could be converted twice (two dialogs or tabs, a lost
  answer, no dry run at all). MassConverter.QueueAsync checks the queued,
  running and paused conversions and queues under one lock, in the caller's
  context (the desktop's enqueue shows a toast on the UI thread); a job's own
  re-plan treats sequences of conversions queued before it as busy.
- The per-photo space check reserved a full batch of photos even when fewer
  were left, so a job whose preview had the space could stop at every retry.
  It now reserves the photo and those after it that may convert at once.
- New sequence now says in the dry run, the panel's totals and confirmation,
  and a new desktop confirmation, how many photos each new sequence lacks;
  only sequences that are copied use those words.
- On the server, a confirmation takes only the plan kept for the index as it
  is now (503 plan_dropped otherwise, never a plan made inside the request),
  and busy sequences and free space are as they are at every request. The
  panel's Apply asks the dry run again first, with Close still available,
  and confirms only the same fingerprint.
- Maintenance keeps another host's conversion staging as long as its journal
  and purges both together; the unstaged-copy failure and blocked sequences
  are logged in catalog sentences.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit fefd9c34ebfeed1f9e84161610ef286026d38355)
2026-11-02 10:33:34 +01:00
Alby96 75daab7275 feat(server): scheduled jobs on the server and a Scheduled tab in the admin panel
Owner review 2, R10: nothing may run out of sight, so every timer the server
ran becomes a system schedule the admin panel shows and manages, and
administrators create their own.

- SchedulerHost runs the shared Scheduler on the job engine (started after
  JobEngineHost, stopped before it); ServerScheduleHost gives it the
  container's time zone (UTC with a warning when TZ is unknown), the archive
  refreshed from archive.json at every run (what ArchivePolling did), the
  clean-up steps and the system schedules: archive-scan every 10 minutes
  (no catch-up, also run once at start like the polling), upload-cleanup
  every 30 minutes, index-backup at 03:00 (SQLite only), housekeeping (job
  history) at 04:00 and audit-cleanup at 04:30.
- ArchivePolling and DatabaseBackupService are gone; UploadMaintenance only
  recovers commits at start, its sweep is the "uploads" clean-up step.
- /api/v1/schedules (ManageArchive, audited): list with actions and time
  zone, create, PUT/PATCH, delete (409 schedule_system), run now (409
  schedule_pending), reset (409 schedule_no_defaults), runs paged by cursor;
  invalid fields are 400 invalid_schedule naming the field.
- CHRONOS_AUDIT_RETENTION_DAYS (AuditRetentionDays, default 365) seeds the
  audit clean-up; set by the environment it is applied at every start and
  locked. Job history leaves Settings: it is the housekeeping schedule's age
  limit, and the setting is what a reset restores.
- Admin panel: Jobs has Queue and Scheduled tabs; schedules with when (in
  the panel's language and the server's zone), next run, last result, a
  switch, Run now, Edit, Delete or Reset, their runs linking to the jobs, and
  a side panel for the action, recurrence and parameters; job rows a
  schedule queued carry a Scheduled pill. Strings in en and it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 808ce94ae29e3bf4522cb4d40dfd76d4f8529c64)
2026-10-27 02:25:01 +01:00
Alby96 e5508e7e69 feat(data): scheduler engine, schedules table and housekeeping jobs
Owner review 2, R10: every timer that queues work becomes a visible schedule,
so the server and the desktop need one shared engine to run them.

- Migration 0007: schedules table (system rows keyed by system_key) and
  jobs.schedule_id; Job.ScheduleId, JobDto.ScheduleId, JobRepository
  HasPendingAsync / ListPendingTargetsAsync / ListByScheduleAsync.
- ScheduleRepository: seeding that keeps user edits, reset, compare-and-set
  claim of a run (one winner across processes), outcomes.
- Scheduling: in-house recurrence (every/daily/weekly/monthly, DST gap moves
  forward, ambiguous time runs once), ScheduleActions resolving scan, verify,
  thumbnails, proxies, analysis, maintenance, backup, cleanup, duplicates and
  orphans into archive jobs, IScheduleHost, and the Scheduler loop (catch-up,
  clock going back, run now, CRUD as API v1 DTOs).
- New job kinds Backup (16) and Cleanup (17) with handlers, shared clean-up
  steps (job history, audit log, trash report that never deletes) and host
  steps through ArchiveServiceOptions; read-only Duplicates and Orphans report
  handlers, so the server can run those kinds too.
- JobEngine no longer purges history at start: the housekeeping schedule's
  job-history step does; JobEngine.CanRun and an EnqueueAsync with scheduleId.
- Protocol DTOs for schedules; job kind names in en and it.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit eb0edd2483a493db7c6945d5b494461cabb2a4ad)
2026-10-27 02:08:11 +01:00
Alby96andClaude Opus 5.5 f2b58522b9 refactor!: rename Titano to Chronos and move CI and releases to Gitea (#6)
CI / Build and test (push) Successful in 8m14s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 7s
Release / Build, test and publish (push) Successful in 13m19s
CI / PostgreSQL 16 integration (push) Successful in 4m49s
CI / PostgreSQL 17 integration (push) Successful in 5m28s
CI / Docker image (push) Successful in 53s
Release / Server image (push) Failing after 10s
The owner renamed the product and moved the repository to the self-hosted
Gitea (https://gitea.encke-hake.ts.net/BalboSoft/Chronos) for more control,
and asked for Actions and a first automatic release with the server package
and the Windows exe (docs/requests/2026-10-23-chronos-gitea.md).

- Chronos everywhere: a byte-exact rename of contents and paths, then a
  per-language review of the forms the old name's ending had dictated.
- Gitea instead of GitHub: the update check, licence, issue and support
  links read ChronosReleasesUrl; the update check takes the highest stable
  version, offers a pre-release build its final release and reports a
  repository it cannot see as a failed check. EULA, security policy and
  Gitea issue forms live at the repository root.
- Gitea Actions for the Linux act_runner (.gitea/workflows): CI, release,
  nightly image and performance gates in the .NET SDK container with git
  checkout and the system SQLite. The release cross-compiles the Windows
  programs, checks their icon, version and DPI manifest, packs installers
  and zips, publishes the Gitea release and pushes the server image
  (REGISTRY_TOKEN). Windows-only tests run in an opt-in job on a Windows
  runner (WINDOWS_RUNNER).
- New Chronos.Tools commands: zip, gitea-release, postgres-ci (replaces the
  docker-exec script, which Gitea's service containers do not allow; the
  throw-away server runs without durability) and pe-check.
- Timed tests take their budget from TestTiming (CHRONOS_TEST_TIME_FACTOR,
  3 on the shared runner; the weekly performance gates keep theirs).

BREAKING CHANGE: programs, settings, data folders, file types, environment
variables and the Docker image use the new name; nothing is migrated from
Titano, which never had a release.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com>
2026-10-23 12:45:18 +02:00