Commit Graph
23 Commits
Author SHA1 Message Date
Alby96andClaude Opus 5.5 e3cbe30b29 fix: conversions on the released phase 4a keep out of folders a sequence left
Phase 4b and its first fix round were written on phase 4a before its rounds 4-6. Moved onto the
released 4a, the conversion now follows 4a's rule for writers into a sequence's folder
(SequenceFolders.Holds), and the parallel fixes meet:

- The job leaves a sequence another index moved away (its folder missing, or holding another
  sequence's sidecar) as Blocked with Errors.Archive.FolderMoved, nothing settled, staged or
  replaced there; the retry after this index's scan converts it where it is. It read the
  sidecar there and reported the reader's technical text.
- New sequence reads the source's project under the source's lease, where its sidecar was just
  read as its own, and writes the new sequence's project under that sequence's lease only into
  a folder that holds it. It read the project from the folder the row named afterwards, without
  a lease, and wrote through the store without the check.
- Download originals (resolved in the cherry-pick of the trash and sync fix, tested here) swaps
  a copy fetched in another encoding into its missing frame after the transfers, as round 6
  restores originals, and only once the sequence is found in the folder the index has;
  otherwise the copies stay staged and the job fails with FolderMoved after its other work.
  The swap ran inside the transfer loop and failed the job at the first refusal.
- The New sequence wording of the three skip reasons the codecs fix added (Archive.Convert.
  NotCopied.EightBit, ColorProfile, TooLarge, en and it): the server and the desktop look them
  up by reason.
- The server's free space test sets the staging folder's figures too: the job fix measures the
  tighter of the archive root's and the staging folder's volumes.

Tests: a conversion of a sequence another index moved (its folder taken or empty), and a
download whose missing frame takes the server's conversion where the sequence is now.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-27 22:33:11 +01:00
Alby96 8174852a2c fix(server): keep convert dry runs like Reorganize's, say what a new sequence lacks
The convert endpoint planned the whole selection inside the HTTP request, again for
every mode, quality keystroke and confirmation, with no limit: behind a proxy an
all-sequence conversion could never get past its dry run or its apply.

- ReorganizePlanCache becomes PlanCache, shared by Reorganize and Convert: one plan
  per key made apart from the request, two at once across both kinds, eight kept,
  15-minute timeout, 5-minute lifetime, 503 plan_dropped. Keys are typed records
  (ReorganizePlanKey, ConvertPlanKey) that also say which exceptions are refusals.
- A conversion plan is keyed by archive, a convert stamp of the index
  (SequenceRepository.GetConvertStampAsync: the Reorganize stamp plus, per planned
  sequence, the photos' count, sizes, formats, pixel sizes and missing, corrupt,
  preview-only and undecodable flags), the sequences and the target with the
  quality that counts. Not the mode: the request's mode and options are set on the
  kept plan, and the free space is measured again at every request through the
  engine. A plan made while the volume was away is not kept (503 archive_offline).
- New sequence holds the converted copies alone: the dry run says the skipped
  photos are not copied into it (Archive.Convert.NotCopied.*, Server.Convert.OnPcNew),
  the panel's totals, column and confirmation give the count, and so does the
  desktop's summary.
- Panel: the preview is asked in Replace's neutral words; a dry run cut off by a
  proxy is asked again while the totals show how long it takes, plan_dropped is
  retried once; an apply the server let go plans again, a changed one shows
  Admin.Convert.PlanChanged, and one with no answer is not resent (its job may be
  queued).

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit f0b1e379ce7c08b6d3459ab25ca6214c8f366f6c)
2026-10-27 22:15:51 +01:00
Alby96 d0bbd77c92 fix(archive): settle conversions by content and keep their aliases through trash, undo, sync and ingest
Owner review 2, phase 4b, fix round 1 (trash, undo, recovery, sync and ingest).

- Replace journal: records a phase (moving, written, undoing) and the name each swapped
  frame is filed under. Recovery decides "sidecar written" by what the sidecar lists, not
  by the frames version any writer moves; a failed rollback stays undoing and its failure
  now stops the writer (as a photo deletion's recovery does). The ingest settles restores
  and replacements first, so an upload can no longer complete a swap that never happened.
- Emptying a Replaced entry re-verifies each replacement where it is now: in the sequence
  through later conversions (a second conversion no longer strands the first originals),
  or, when the conversion was deleted, its copy in the trash. The dry run marks such
  entries "conversion deleted" (fingerprinted, shown on the desktop and the panel), and
  the confirmed emptying may then erase them instead of keeping them forever.
- Undo of a conversion takes exactly the entries its job made (the job id is recorded on
  the entry), never entries found by time window.
- Project positions translated by photo use the sidecar's photo of every frame still
  there, so positions on a converted frame stay put when another frame went meanwhile.
- Sync aliases are equivalence classes: an original converted on both sides is one photo;
  link-by-content, proxy counting and proxy upload follow aliases; a download into a
  frame missing here swaps the other encoding into that frame instead of adding a frame.
- The ingest answers a converted photo's original (a card or folder imported again, a
  download) as a duplicate of its conversion and keeps the alias tombstone.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 3341a2f845753fc4c5bcba51a3b645f126c95eaf)
2026-10-27 22:13:36 +01:00
Alby96 f86a151a5d fix(convert): keep what the original holds and plan only what converts
Phase 4b review, codec findings. A Replace makes the converted file the
photo, so a conversion must not lose what the original held, and the dry
run must promise only what the job will do.

- Linear DNG from a conversion is scene-referred: the pixels are stored in
  linear ProPhoto primaries (colours outside sRGB stay positive) and
  divided by the power of two that brings their peak under the white
  level (at most 4 stops), with BaselineExposure giving it back and
  ColorMatrix1/ForwardMatrix1 describing that space. Highlights a RAW
  develops above 1 and its wide-gamut colours now read back as written.
  Exports keep the clipped linear-sRGB DNG.
- A conversion reads with the managed decoders first for every format they
  read natively (RAWs developed at float precision, as on the server) and
  with WIC only for what they cannot. A RAW only WIC's Raw Image Extension
  develops (8 bits) is refused for TIFF-16 and linear DNG and planned out
  as "eight_bit"; JPEG still converts it. Providers say so through
  IImageDecoderProvider.DevelopsRawAt8Bits.
- The original's colour space is kept: a JPEG (APP2) or TIFF (tag 34675)
  carries its ICC profile, with the values unchanged; a linear DNG gets the
  values converted through a matrix/TRC profile; a gray profile converts
  to sRGB. Exif Adobe RGB (uncalibrated + R03) and HEIF nclx P3 get an
  in-house profile. A space nothing here can keep (CMYK, a lookup-table
  profile into a DNG, uncalibrated without R03, HDR nclx) is planned out
  as "color_profile". New in-house ICC parser/writer and header reader
  for JPEG, PNG, TIFF, HEIF/AVIF and WebP.
- The planner asks every file, whatever tier was recorded (unknown before
  the light analysis, or by another host), with the conversion's decoders,
  headers only and eight at a time; a RAW the server cannot develop is
  "convert_on_pc" in the plan instead of failing its sequence. Photos a
  target cannot hold (a JPEG side above 65535, more samples than one
  buffer) are planned out as "too_large", and an overflow fails its photo
  rather than the job.
- A photo that fails reads in the job log as one catalog sentence by cause
  (Archive.Convert.Failed.*), the file named once; the exception's English
  text goes to the diagnostics log only.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 0ca1e91ea09946d7a55f45695ee58e1a0ff5f779)
2026-10-27 22:04:34 +01:00
Alby96 0e52929274 feat(archive): convert sequences to JPEG, TIFF-16 or linear DNG after import
Owner review 2, R7 asks for mass conversion after import on the web panel and the desktop,
with a choice at every run between Replace and New sequence. This is the engine and the
server API both UIs build on.

- Core/Conversion: ConvertOptions (JPEG 4:4:4 at quality 1-100, default 95; TIFF-16 sRGB
  Deflate with the predictor; linear DNG, the archival choice; converted names keep the
  stem and take the target's extension in the old one's case). FrameConverter decodes at
  the native tier only, encodes with the in-house writers, writes Exif from the sidecar
  (capture time to the tick, offset, exposure) and the original (camera, serial, lens,
  modes, GPS), hashes the bytes as made, writes atomically and verifies: read back, the
  metadata again, a decode by the server's decoders. ExifWriter now writes the exposure
  program, metering mode, flash and white balance. ConvertPlanner: convertible frames,
  skips with reasons, size estimates per pixel, the plan's space and fingerprint.
- FrameTrash.ReplaceAsync swaps the files of frames in place: same ids and indices, the old
  files and their XMP companions into one Replaced trash entry (records, replacement
  hashes, a copy of analysis.json), tombstones aliasing old content to new, proxies of the
  swapped frames dropped, under .chronos/replace.pending.json, which the next writer undoes
  or completes. Restoring a Replaced entry swaps back while every converted frame is
  unchanged (the converted files become a Replaced entry in turn), else the originals come
  back as a new sequence.
- MassConverter and JobKind.Convert (19): the dry run (busy, offline, unreadable, space
  against ArchiveServiceOptions.FreeSpace), stage A converting into
  staging/convert-<job>/ in parallel with each source re-hashed and each staged file
  appended to journal/convert-<job>.staged, stage B per sequence all or nothing under the
  lease at the planned frames version: Replace, or a new sequence through the ingest with
  the source's tags, rating, notes and project. Resumes keep verified staged files; a
  sequence changed, busy or with a failed photo is left as it was and fails the job at the
  end, the journal kept for a retry.
- POST /api/v1/archive/convert: dry run with the plan, its space line and fingerprint, or a
  202 convert job; formats the server cannot read at full resolution are skipped as
  convert_on_pc; validated, audited (archive_converted), sequenceChanged converted/created.
  The server measures the space volume for the check.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 809210d924cfc3f597ecdea26106fb3ff62d3762)
(cherry picked from commit e13d4c0bb1bd9441933b6f3e5b6220e865a7228c)
2026-10-27 22:01:23 +01:00
Alby96 8c2b9f1bfe fix(archive): a rebase moves no row of the sequence that took the old folder; writers refuse a folder another sequence holds
Round 4 let every row under the old folder follow when that folder holds another sequence
now. When the scan took the new holder first, its own row (already rebased into the old
folder) then followed the moving sequence too and named that sequence's file, leaving its
own export without a row; a second scan did not repair it. Only the moving sequence's own
rows now follow because the old folder is taken, and a row of the sequence holding the old
folder never follows: its export is in its own folder whatever the other one took along
under the same name. The rebase callback now gets the owner of each row.

Writers that file into the folder the index has for a sequence checked only that the folder
existed. After another index moved the sequence away and another one into that folder, Take
server wrote the server's settings into the other sequence's project.json, Save both wrote
this PC's copy into its .chronos, and a render sent for the sequence was filed among its
exports. SequenceFolders.Holds treats a folder whose sidecar names another sequence exactly
like a missing one, and every such writer asks it: settings sync and conflict resolution
(Errors.Archive.FolderMoved), Save both's copy and its clean-up, server render filing (503
folder_moved, the upload kept), export downloads, render jobs as they start, proxies sent and
proxy passes, the deep analysis checkpoint and the editor's project save. A thumbnail pass
refuses a sidecar of another sequence before it opens the pack.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit b406a4f6a9a7a3121e9e40289663fb62ee31948e)
2026-10-27 20:36:20 +01:00
Alby96 964b996af2 fix: keep pre-rule templates through web settings saves; retry render filing after another index moved the folder
The web panel's archive settings save checked both request templates against
every template rule before the engine ran, so an archive.json saved before the
rules made every save fail, even of the name or proxy size. Only a template that
differs from the stored one is now held to the rules, as ArchiveService already
does, and a TemplateRuleException from the engine (archive.json changed since the
form was read) answers invalid_template with its rule instead of archive_policy.

Exports follow a moved folder correctly in two more cases. Image-sequence exports
are folders, so the rebase now tests Path.Exists instead of File.Exists. An
export left at the old path no longer pins a sequence's row when that path now
belongs to another sequence (its sidecar holds the old folder, or its render row
names the path); the row follows to the new path, so it never names another
sequence's file.

RenderStore throws FolderMovedException when the sequence is not in the folder
the index has. That is transient until this index's next scan, so client render
uploads and render-node results now answer 503 folder_moved, keep the part file
and the node's job, instead of failing them for good with a wrong reason.

Save both and Take server refused because the folder moved now say
Errors.Archive.FolderMoved (try again after the next scan) instead of the
"changed again, choose again" sentence, which repeated until a scan.

Doc wording: the ReorganizeDialogViewModel summary covers a sequence kept whole,
and RenamePlanner.Plan's existsExactly says the own folder is found under at most
one of the two names.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit d898798657197d48f4e19b7f776003eb2fc441b5)
2026-10-27 19:46:16 +01:00
Alby96 1fb040afe6 fix(server): a verify that hashes photos plans Reorganize again; keep refusals, bound planning
The kept-plan stamp left out whether a planned sequence's photos are hashed.
A verify writes frames.sha256 (and only status and verified_at on the row)
without another frames version, so after verifying never-hashed photos the
same dry run kept answering "verify the sequence first" for up to five
minutes, and its confirmation queued a job certain to fail.

- SequenceRepository.GetStampAsync adds, for every planned sequence, how many
  of its photos have their hash in the index (one grouped query over the
  archive with all, the selected ids in batches of 500 otherwise).
- ReorganizePlanCache keeps a refusal (nested_target, not_found) as it keeps
  a plan: for the same stamp and templates it is the same, and a long plan
  that ends refused after a cut-off is no longer planned again on every retry.
  Failures are still not kept.
- Planning is bounded: at most two plans are made at once, the others wait for
  their turn; a plan still being made 15 minutes after it was asked, let go at
  capacity, or when the server stops is cancelled, and whoever waits for it
  gets 503 plan_dropped. A read that hangs keeps its turn until it returns but
  no longer keeps its waiters.
- The Capacity summary now says what eviction does (the kept plan asked for
  first, else the plan being made asked for first); the stamp, protocol and
  endpoint docs say that a verify hashing photos is a change the plan reads.
- Tests: a scan's photos, verified, are planned again and renamed by the job;
  the stamp follows hashes of planned photos only; refusals kept, failures
  not; turns, eviction and deadline of plans being made, a hung read included.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 56582df45453fc555e525f19de7de1803204d12c)
2026-10-27 19:16:42 +01:00
Alby96 c3756d03c9 fix: keep render filing retryable and writers out of a folder another index moved
Third fix round of owner review 2, phase 4a (Reorganize), cross-cutting items.

- Server render filing now runs under the sequence lease, so it can meet a busy
  sequence or an offline archive. Both completions (client render uploads and
  render-node results) used to answer 500 and leave the upload stuck in
  Committing until a restart. They now answer 503 sequence_busy or
  archive_offline, which clients retry. The upload goes back to receiving with
  its part file and the node keeps its job (UploadService.ReceiveAgainAsync).
- Save both: when this PC's copy cannot be written (another index moved the
  folder), the server's version is no longer applied, even if this index's scan
  relocates the row before the apply would run. A copy that has to be dropped is
  deleted from where the folder is now, as a best effort.
- Export rebase on a folder move (scan and Reorganize): the sequence's own
  export follows the folder unless its file is still at the old path and not at
  the new one. A file written into a re-created old folder therefore keeps a row
  that finds it, so the file is never stranded.
- A render job refuses to start when its folder is not where the index has it,
  which also stops it from re-creating the old folder. Renders fetched by sync
  are now filed under the sequence lease into the current folder, or not at all
  (new string Errors.Archive.FolderMoved, en and it).
- The proxy pass holds the thumbnail lease one batch at a time (a quarter of
  the lease wait), then lets it go for longer than a waiter's poll and reads
  the folder and sidecar again. Before, another process's Reorganize, sequence
  deletion or pack compaction could wait out its lease wait and fail. Updated
  the stale comments on that lease and ARCHITECTURE.md to match.

Tests cover each fix, and each new test fails with its fix reverted. Also
covered: proxy store and pass in a moved folder, RenderStore with the folder
gone, Take server with the folder moved, and an editor save with the folder
moved.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 811509d32a118ed50ad10d47d4b002e534da9d77)
2026-10-27 19:16:28 +01:00
Alby96 37800b28ef fix(server): key kept Reorganize plans on what they read, plan apart from the request
A kept dry run was keyed on a stamp of every sequence row of the archive,
updated_at and verified_at included, so any upload, ingest status write,
verify or tag edit anywhere invalidated it and the confirm planned the whole
selection again. The plan was also bound to the request, so a proxy cutting
the request off cancelled it and a retry started over.

- The stamp (SequenceRepository.GetStampAsync) now hashes only what the
  planner reads from the index: every row's id and folder (collisions and
  what a moving folder carries), the planned rows' title, first capture,
  camera, lens, photo count and frames version, and the titles of the rows
  inside a planned folder. With all, every row is planned.
- ReorganizePlanCache makes a plan on the thread pool with the host's
  stopping token, once per key for concurrent requests; a request cut off
  only stops waiting, and the same request again waits for the plan or
  takes it. Refusals and failures are still not kept.
- A kept plan is dropped by its own timer five minutes after it was made
  (and never used past that), instead of staying until the next request.
- The protocol and endpoint docs say that plan_changed answers changes the
  index has; one made on disk alone is found by the job, which fails and
  changes nothing. The Capacity doc no longer claims a step per sequence.
- Tests: what the stamp follows and ignores, a kept plan surviving an upload
  elsewhere and a verify, one plan for concurrent requests and after a
  cut-off, the timer, an all:true apply carrying a nested sequence beside a
  blocked-only one, the first sequence told before a pause. The
  no-archive-module job_unavailable test expected a folder the planner no
  longer plans without a sidecar; it now expects the unreadable step.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 7e01a4f85fe4b880ddd98a481fc8591649cec254)
2026-10-27 18:09:46 +01:00
Alby96 6e99a4b269 fix(archive): exports follow a folder any index moved; proxies, exports and copies no longer recreate it
Second review of owner review 2, phase 4a (Reorganize), cross-cutting findings.

- A second index of the archive (a desktop sharing a server's archive, or a folder moved by
  hand) moved the sequence row at its next scan but left renders.output_path at the old
  folder: the export answered 404 there. The scan now rebases the render rows in the same
  transaction when it finds a sequence in another folder.
- The rebase covers every render of the archive under the old folder: the sequence's own
  exports always, and another sequence's export saved inside it (through the Export folder
  picker) when its file moved with the folder. That check keeps the exports of a sequence
  that took the old folder since (a later Reorganize on the other index) where they are. A
  change of case only counts as a move.
- The desktop now tells an open editor after each Reorganize step
  (ArchiveServiceOptions.SequenceChanged -> AppServices.SequenceReorganized), and the editor
  reads its sequence again where it is now, so frames no longer decode blank until the next
  save. LocalSequenceSource.LoadAsync also requires the same folder on both row reads, so a
  move that commits during the frame listing is never taken as current.
- Writers that wrote without the lease, or trusted a row another index had moved, could
  create the old folder again. A proxy sent by a client is now filed under the sequence's
  lease into the folder the index has then, and a gone sequence or folder answers 404
  (sequence_busy 503 after the lease wait). The server files a render a client or render
  node sends under the lease (ArchiveService.UnderLeaseAsync). "Save both" keeps its copy
  under the lease. The proxy pass holds the thumbnail lease, as the thumbnail pass does. The
  deep analysis opens its checkpoint under the sequence lock only while the folder is still
  there, and a pass whose folder another process moved records nothing (the job logs
  Advisor.Log.FramesChangedElsewhere). Editor saves and sync applies refuse when the folder
  is gone.
- ARCHITECTURE.md no longer claims more than this: a render of another process whose folder
  moves while it runs is still not stopped.
- ArchiveVerifier.FlushAsync: corrected the comment. A move keeps each file's stamp, so only a
  check that found the file missing no longer applies.

Tests cover the scan path with a later swap into the vacated folder, another sequence's
export inside a moving folder, a photo deletion refused when the folder moved while it
waited for the lease, proxies sent and made after a move, Save both during a move, a deep
analysis whose folder another index moved, a render filed after a move on the server, and
an open editor reloaded by a Move job.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit c857b98f795b22956c060f1c5acf4d94b6d1c994)
2026-10-27 18:09:02 +01:00
Alby96 765f0ad36b fix(archive): Reorganize never plans a move onto a folder of the exact name, keeps long names' extensions, says why a template is refused
Second fix round of owner review 2, phase 4a (planner findings).

- A sequence keeps a folder that differs from its own in case only while no
  other folder holds that exact name (RenamePlanner.ExistsExactly, every level
  compared exactly). On a case-sensitive file system a stray "Trip (2)" beside
  the sequence at "trip (2)" no longer gives a case-only step that MoveFolder
  refuses at every archive open: the plan gives "Trip", and a plan whose
  target appeared since is refused under the step's leases before anything
  moves (or dropped when it resumes). A change of case in an outer level no
  longer looks like two folders on Windows.
- A file name longer than 200 characters is shortened before the ".{ext}" the
  template ends with, never through it, so a long title never strips the
  photo's extension.
- The archive engine's own settings check applies the template rules the
  server and the desktop apply (a folder scans skip, a lost extension, names
  that repeat), so archive.json can no longer take such a template.
- The server's invalid_template answer names the rule after the field
  ("fileTemplate:extension") with the desktop's sentence as its message; both
  admin panels show it on the field.
- FrameNaming keeps only the naming overloads production uses.
- Comments about Unreadable say the whole sequence stays as it is.
- Tests pin filing against Reorganize: an upload without a capture time, a
  card's second session with {session}, a duplicate skipped mid-session, and a
  whole folder of two cameras named with the first one's camera.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 50fe59aec1e180daa1733bcb951892a79dceba6c)
2026-10-27 18:08:08 +01:00
Alby96 9e1f109b58 fix(reorganize): a sequence still receiving photos keeps its file names and the job goes on
A Reorganize with a file template failed its job at the step of a sequence
a camera was still uploading into, and its retry gave the rest up. Photos
changed since the plan now never refuse a step: that sequence keeps its file
names (FilesKept), its folder and title change as planned, the other steps go
on and the job ends with ReorganizeKept. The fingerprint, the job's
confirmation and the check under the leases pin file renames by their digest
instead of the frames version, so photos filed under the names the plan gives
them no longer make a dry run or a queued job stale.

- A step whose folder or files a template names after {title} checks the
  title as a retitle does (RenameStep.NamedByTitle): no name comes from a
  title edited since the plan.
- Recovery sends a photo that already took its new name back together with a
  companion whose new name was taken, so the two never end up apart.
- ArchiveService.OpenAsync logs a NewerFormatException from resuming a plan
  and keeps its journal, so a server still boots.
- Once a step's folder moved, every index row of the step follows it even
  when a sidecar cannot be read or written; the step then fails for a retry.
- Job log lines and errors give the real reason for files kept busy (in use
  or a new name taken) and for a sidecar of a newer format (new Newer
  outcome; strings en and it).
- A plan an archive open completes tells sequenceChanged; the docs that
  promised more than that are corrected.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit f8554b8af0828ab9b0ff128e694abacdd53e6fd7)
2026-10-27 18:08:07 +01:00
Alby96 9ae773aa5a fix(server): keep Reorganize dry runs for the confirm, test the protocol's key paths
An all:true dry run reads every sidecar and photo folder of the archive inside
the request, and the confirm planned the whole archive again before answering
202. The server now keeps each dry run's plan for five minutes (eight plans at
most) by archive, selection, templates and a stamp of the archive's index rows:
the same dry run again and its confirmation take the kept plan, and any change
the index records (an upload, an edit, a move, a scan, a verify) gives another
stamp and a new plan. A change made on disk alone is not in the stamp; the move
job still plans again and refuses a plan that no longer matches.

Server tests now cover an all:true apply around a sequence already in place, a
real plan_changed after an upload, a move job paused between two sequences and
resumed, archive_offline, job_unavailable, more than 1,000 ids and the kept
plans themselves; a Data test covers the index stamp.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 71bb53fbf8eb7d0327ea692d046634b12f8d37e9)
2026-10-27 16:30:00 +01:00
Alby96 9ce201cd70 fix(archive): exports follow a Reorganize folder move; writers resolve the folder under the lease
A Reorganize step that moves a sequence folder carries its exports/ with it, but only
the sequences and frames rows followed: renders.output_path kept naming the old folder,
so the server answered 404 for the export, Get/Send exports and Reveal lost it, and no
scan or trash restore could repair it. RenderRepository.RebaseFolderAsync now rewrites
the archive-relative output paths of the step's sequence in the same transaction as the
frames (idempotent on resume; absolute outputs and the archive root are untouched).

Writers that read a sequence row before taking its lease wrote into the folder a
Reorganize had moved meanwhile, creating it again (project.json from the editor or a
sync, a thumbnail pack) or failing on its missing sidecar. They now take the folder from
the index row read under the lease (SequenceWriter.FolderAsync): the editor's save
refuses with FramesChangedException and reloads at the new folder, FramesCurrentAsync
reports a moved folder, and the sync apply, project store, thumbnail pass and its
status, decode tiers, analyses, verify, info edits, ingest, duplicate flags, pack
compaction and photo restores write where the sequence is now; a photo deletion planned
before the move is refused as stale.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit be28d8acf0d96012c94a266f8af61e9bbafaa28d)
2026-10-27 16:29:59 +01:00
Alby96 b253cac8d4 fix(archive): Reorganize names as filing does and refuses templates that lose or hide photos
Reorganize with the archive's own templates planned renames and moves for
photos just filed, and some templates could strip extensions, hide sequences
from scans or stall a dry run. Owner review 2, phase 4a findings.

- Filing and Reorganize share one context: uploads and imports name every
  photo with the sequence's camera and lens (its first photo's, or the
  creator's hint), an upload's folder from its first frame in the new
  sequence, and a missing capture time from the sequence start instead of
  the current time. The planner expands folder and title templates from the
  first frame in the sidecar ({name}, {ext}, {iso}...), never today's date.
- Titles expand as text (ExpandText): "Paris: night" stays as typed.
- A sequence whose sidecar cannot be read (torn, another sequence's) keeps
  its folder, title and names, listed with why, and so does every folder
  around it; the dry run reads every sidecar, nested ones included.
- Kept never gives one folder to two sequences of a plan whatever the case,
  and a case-only move onto another folder is refused instead of taken as
  done.
- Shared template rules (TemplateRules) for the server's Reorganize and
  archive settings and the desktop's fields: a file template must keep the
  photo's extension ("{n}{ext}" refused) and tell a session's photos apart;
  a folder template may not write a level scans skip (a leading dot,
  originals, proxies, exports). Levels a title gives are escaped with "_".
- {ext} comes from the file, or from the original name when the file lost
  a photo's extension, so a Reorganize can put it back.
- Unique names cost linear time (UniqueNames) with the same names as before.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 6c734777e01476881a3f34b3188571cc3f7150ab)
2026-10-27 16:29:31 +01:00
Alby96 eb2395d9b0 feat(archive): reorganize existing sequences with folder, file and title templates
Owner review 2, R7 asks for renaming and moving after import, on the web panel and the
desktop. This is the engine and the server API both UIs build on.

- FrameNaming (Core/Naming) is the one naming context and unique-name rule of a frame:
  imports, uploads and Reorganize now produce identical names (behaviour of the ingest and
  the import planner unchanged).
- RenamePlanner takes a file template: each step counts its renamed frames, shows the first
  three and the frames version they were planned at, and lists what keeps its name (photos
  in place outside originals/, never hashed, missing, unreadable sidecar). Names are given
  in index order with _2, _3 as filing does; XMP companions follow their photo.
- MassRenamer renames a step's files under the same leases after its folder moved, checks
  the frames version, journals .chronos/rename-files.json and moves files in two phases
  through temporary names so chains and swaps never meet; then sidecar, index
  (FrameRepository.RenameFilesAsync, both dialects) and journal. A failure puts every file
  back; a crash is completed by the next writer or the plan's resume, the index following.
  Plans a paused or cancelled job holds are left to that job.
- JobKind.Move gets MoveJobHandler: it plans again and applies only the confirmed plan
  (fingerprint and frames versions), with progress and checkpoints per sequence.
- POST /api/v1/archive/reorganize: dry run with the plan and its fingerprint, otherwise a
  202 move job; validated templates, audited, sequenceChanged reorganized events.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit aae1c3eb18ea932b4a6251c5e2a282b9295a5785)
2026-10-27 14:03:36 +01:00
Alby96 4518ffe655 fix(archive): settle trash journals under their leases and say why restored photos stayed
Second fix round of owner review 2, phase 3 (engine, server, desktop).

- A photo never hashed whose original is missing can be deleted again: it goes
  into its trash record without a file and without a tombstone (nothing is left
  to name), stays listed until Empty erases it, and a restore keeps it with the
  reason "no file". FrameDeleteBlock.Unhashable now blocks only a present
  original that cannot be read; the API answers it as 409 photo_unreadable
  naming the photo, and every block has its own code and message.
- Deleting a whole sequence first settles an interrupted photo deletion,
  restore or ingest of it (ReadLocked under its lease), so no journal or half
  entry travels into the sequence's trash entry; it refuses while a restore
  into it waits for its busy entry.
- FrameTrash.Settle takes the photo entry's lease and leaves the journal for
  later while the entry is busy (an emptying), so it never races EraseAsync;
  meanwhile no other restore writes its journal over it and scans do not adopt
  its files.
- The hashes computed for frames that stay (to find a twin of a deleted photo)
  go into the sidecar and index, and only a frame whose first and last 64 KiB
  match a deleted photo's is read whole.
- A restore into a new sequence rewrites its record after each photo filed, so
  a crash or a database failure never leaves filed photos listed.
- An upload completion no longer has a window before the commit: the ingest
  checks the sidecar's tombstones under the sequence lease a deletion takes
  (IngestRequest.RefuseRemoved), unless the upload asked to bring it back.
- A restore reports each kept photo with its reason (no longer matches its
  record, could not be moved back, already in the sequence, had no file); the
  desktop line and the API message say so in en and it, and the tooltip holds
  the whole sentence. The desktop tells TrashMismatchException by its type.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 1858f1f450a35fb8383ede8d80ce5f8de9b7ceac)
2026-10-27 13:53:41 +01:00
Alby96 66c3662954 fix(server): trash and photo-delete API answers, body limit and audit
- frames/delete carries its own request body limit (about 4.8 MB), so the
  documented 100,000 ids fit; the server's 1 MiB stopped at about 26,900.
- Restore tells a damaged or foreign sidecar of the target sequence
  (409 sidecar_mismatch) from an entry whose files no longer match its
  record (422 trash_mismatch, now a TrashMismatchException); frames/delete
  answers sidecar_mismatch instead of 500, and 404 when the sequence left
  the index between plan and delete, also on the re-plan.
- With the archive offline, the trash list and the empty plan answer
  503 archive_offline instead of an empty trash; a read-only archive still
  lists and plans but cannot be emptied.
- The empty request is audited as trash_empty_requested: the job checks
  the plan again and may erase nothing, so the entry no longer claims an
  erase that has not happened.
- API tests for these paths, a named subset emptied, sequence-entry
  restore and sequence_in_library, photos restored into a new sequence,
  viewer 403 on bulk routes and admin deletes of another user's photos.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit fa35831d55c44746f7f76e0cff262ed6aecf8e72)
2026-10-27 12:46:06 +01:00
Alby96 aa1d4913a3 feat(admin): Library pages on the web panel (owner review 2, R6)
The web panel now manages the library without editing it: the owner can
browse and view sequences and photos, delete sequences and photos into the
archive's trash, restore or empty the trash and run mass operations, as
R6 asks, on top of the engine endpoints of the previous commit.

- Library page right after the Dashboard: search, Year/Camera/Status/Tag
  filters fed by a new GET /api/v1/sequences/facets, sort, cards or list
  (remembered per browser), lazy cover thumbnails, Load more by cursor,
  multi-select with Shift ranges and "Select all N" of the filter, and a
  sticky bar for the selection: Analyse, Proxies, Thumbnails, Verify,
  Tags (add/remove), Export CSV (client-side) and Delete (dry run, list
  of what moves to the trash, then the move). Filters live in the address,
  so Back from a sequence finds them again.
- Sequence view (#/library?id=): inline title, tags, rating and notes,
  facts, photos in pages of 500 with content-visibility, a photo viewer
  (proxy, arrows, Esc, Exif facts), Set cover, Download original, Delete
  photos (typing the count above 20 photos), Delete sequence, renders to
  download. No video editing controls.
- Trash view (#/library?view=trash, also linked from Archive): entries,
  Restore, and Empty (dry run, list, the localised word typed, the plan's
  fingerprint sent back, the job followed to its end).
- Live updates from sequenceChanged and jobState; keyboard grid (one tab
  stop, arrows, Space, Shift+Space, Enter, Ctrl+A, Esc); RTL, dark theme.
- GET /sequences takes rendered=true|false for the Status filter.
- ui.js: confirmDialog's typed confirmation by name, word or count, with a
  list of what the action concerns; formDialog. api.js: putBytes for the
  web upload, which the Library imports on demand (upload.js, optional).
- New web icons from icons.py (Image for the Library, trash, grid/list,
  arrows, stars, cover); directional glyphs mirror in right-to-left pages.
- Strings in en and it; tests for the facets (both dialects), the rendered
  filter, the menu, the modules and the on-demand upload import.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 029cf334f66cb6fa1265b96a6f8faff2964c11ea)
2026-10-27 10:51:04 +01:00
Alby96 51782a3ada feat(archive): photo delete, tombstones, trash kinds and emptying, library API
Owner review 2, R6: the web panel manages the library without editing it, so
the engine and the server must delete single photos safely, keep them out of
sync afterwards, and let an administrator restore or finally erase the trash.

- Migration 0008: frame_removals (tombstones by sequence and SHA-256, reason,
  replacement); the sidecar gains "removed" (omitted when empty) and frames a
  reserved "source"; the indexer writes the tombstones on every sync, so a
  rebuild keeps them, and drops a hero frame that is gone.
- FrameTrash: dry run (busy, frames changed, offline, would empty), delete under
  the sequence lease with a write-ahead journal that the next writer undoes
  after a crash, files to trash/photos/<seq>-<time>/originals with a record,
  sidecar without the frames plus tombstones, index sync clearing analyses,
  thumbnails and proxies, proxies renamed to follow their frames, follow-up
  jobs. Restore re-hashes every file, keeps mismatches in the trash, puts the
  same frame records back and drops their tombstones, or files the photos into
  a new sequence through the ingest when theirs is gone.
- Project positions on vanished photos are translated by photo and wait as
  pending frames, so they come back with a restore.
- Trash entries have a kind (sequence, photos, replaced); emptying is a dry run
  with a fingerprint and a new EmptyTrash job (18) that erases exactly the
  planned entries, refuses a stale plan and erases replaced originals only
  while their replacements still hash right.
- Sync honours tombstones: nothing one side deleted is offered back, local
  files are never deleted, replaced photos count as their replacement; the
  server answers an upload of a tombstoned SHA-256 as already there.
- Server: sequence thumbnail, photo delete, bulk delete/retag/jobs, trash
  list/restore/empty endpoints with their error messages; a verify of
  sequences now targets their archive (POST /jobs failed before).
- Desktop trash dialog lists photo entries and empties the trash after a
  typed confirmation through the same job.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 35bb56690a1d69eae57153d036e1409201cd73f7)
2026-10-27 10:49:34 +01:00
Alby96 0e84392f4f feat(logs): log level, retention, size limits and rotation on server and desktop
Owner review 2, R11 asked for more log settings. The file sink now writes daily or
hourly files, continues a full file in numbered parts and prunes by age and by the
total size (never the file being written); its options change while it runs.

Server: the file and console levels are separate and read by the logging filters
at every line, so the admin panel's new Logs group applies without a restart; the
engine's level follows the lower of the two. This also fixes a bug: the file logger
was fixed at Information, so CHRONOS_LOG_LEVEL=Debug or Trace never reached the
files. New variables CHRONOS_LOG_CONSOLE_LEVEL, CHRONOS_LOG_RETENTION_DAYS,
CHRONOS_LOG_MAX_FILE_MB, CHRONOS_LOG_MAX_TOTAL_MB, CHRONOS_LOG_ROTATION,
CHRONOS_AUDIT_RETENTION_DAYS and CHRONOS_DIAGNOSTICS_LOG_MB lock their settings like
the others; the diagnostics zip keeps the configured share of each log.

Desktop: Settings > Advanced gains Log level, Keep logs, File size, Logs total,
Rotation and Diagnostics logs, applied at every save; Advanced's Reset section
restores them.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit cc875784e4952ee0e4c807b9d9c18496d3d5a8c3)
2026-10-27 02:08:09 +01:00
Alby96andClaude Opus 5.5 f2b58522b9 refactor!: rename Titano to Chronos and move CI and releases to Gitea (#6)
CI / Build and test (push) Successful in 8m14s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 7s
Release / Build, test and publish (push) Successful in 13m19s
CI / PostgreSQL 16 integration (push) Successful in 4m49s
CI / PostgreSQL 17 integration (push) Successful in 5m28s
CI / Docker image (push) Successful in 53s
Release / Server image (push) Failing after 10s
The owner renamed the product and moved the repository to the self-hosted
Gitea (https://gitea.encke-hake.ts.net/BalboSoft/Chronos) for more control,
and asked for Actions and a first automatic release with the server package
and the Windows exe (docs/requests/2026-10-23-chronos-gitea.md).

- Chronos everywhere: a byte-exact rename of contents and paths, then a
  per-language review of the forms the old name's ending had dictated.
- Gitea instead of GitHub: the update check, licence, issue and support
  links read ChronosReleasesUrl; the update check takes the highest stable
  version, offers a pre-release build its final release and reports a
  repository it cannot see as a failed check. EULA, security policy and
  Gitea issue forms live at the repository root.
- Gitea Actions for the Linux act_runner (.gitea/workflows): CI, release,
  nightly image and performance gates in the .NET SDK container with git
  checkout and the system SQLite. The release cross-compiles the Windows
  programs, checks their icon, version and DPI manifest, packs installers
  and zips, publishes the Gitea release and pushes the server image
  (REGISTRY_TOKEN). Windows-only tests run in an opt-in job on a Windows
  runner (WINDOWS_RUNNER).
- New Chronos.Tools commands: zip, gitea-release, postgres-ci (replaces the
  docker-exec script, which Gitea's service containers do not allow; the
  throw-away server runs without durability) and pe-check.
- Timed tests take their budget from TestTiming (CHRONOS_TEST_TIME_FACTOR,
  3 on the shared runner; the weekly performance gates keep theirs).

BREAKING CHANGE: programs, settings, data folders, file types, environment
variables and the Docker image use the new name; nothing is migrated from
Titano, which never had a release.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com>
2026-10-23 12:45:18 +02:00