7692ab402ece3dc4e4bccbbe8ca8c2b1727eadae
10
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
8174852a2c |
fix(server): keep convert dry runs like Reorganize's, say what a new sequence lacks
The convert endpoint planned the whole selection inside the HTTP request, again for every mode, quality keystroke and confirmation, with no limit: behind a proxy an all-sequence conversion could never get past its dry run or its apply. - ReorganizePlanCache becomes PlanCache, shared by Reorganize and Convert: one plan per key made apart from the request, two at once across both kinds, eight kept, 15-minute timeout, 5-minute lifetime, 503 plan_dropped. Keys are typed records (ReorganizePlanKey, ConvertPlanKey) that also say which exceptions are refusals. - A conversion plan is keyed by archive, a convert stamp of the index (SequenceRepository.GetConvertStampAsync: the Reorganize stamp plus, per planned sequence, the photos' count, sizes, formats, pixel sizes and missing, corrupt, preview-only and undecodable flags), the sequences and the target with the quality that counts. Not the mode: the request's mode and options are set on the kept plan, and the free space is measured again at every request through the engine. A plan made while the volume was away is not kept (503 archive_offline). - New sequence holds the converted copies alone: the dry run says the skipped photos are not copied into it (Archive.Convert.NotCopied.*, Server.Convert.OnPcNew), the panel's totals, column and confirmation give the count, and so does the desktop's summary. - Panel: the preview is asked in Replace's neutral words; a dry run cut off by a proxy is asked again while the totals show how long it takes, plan_dropped is retried once; an apply the server let go plans again, a changed one shows Admin.Convert.PlanChanged, and one with no answer is not resent (its job may be queued). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit f0b1e379ce7c08b6d3459ab25ca6214c8f366f6c) |
||
|
|
d0bbd77c92 |
fix(archive): settle conversions by content and keep their aliases through trash, undo, sync and ingest
Owner review 2, phase 4b, fix round 1 (trash, undo, recovery, sync and ingest). - Replace journal: records a phase (moving, written, undoing) and the name each swapped frame is filed under. Recovery decides "sidecar written" by what the sidecar lists, not by the frames version any writer moves; a failed rollback stays undoing and its failure now stops the writer (as a photo deletion's recovery does). The ingest settles restores and replacements first, so an upload can no longer complete a swap that never happened. - Emptying a Replaced entry re-verifies each replacement where it is now: in the sequence through later conversions (a second conversion no longer strands the first originals), or, when the conversion was deleted, its copy in the trash. The dry run marks such entries "conversion deleted" (fingerprinted, shown on the desktop and the panel), and the confirmed emptying may then erase them instead of keeping them forever. - Undo of a conversion takes exactly the entries its job made (the job id is recorded on the entry), never entries found by time window. - Project positions translated by photo use the sidecar's photo of every frame still there, so positions on a converted frame stay put when another frame went meanwhile. - Sync aliases are equivalence classes: an original converted on both sides is one photo; link-by-content, proxy counting and proxy upload follow aliases; a download into a frame missing here swaps the other encoding into that frame instead of adding a frame. - The ingest answers a converted photo's original (a card or folder imported again, a download) as a duplicate of its conversion and keeps the alias tombstone. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit 3341a2f845753fc4c5bcba51a3b645f126c95eaf) |
||
|
|
341fb77507 |
fix: conversions name, lock and settle as phase 4a's writers do
Phase 4b was built on phase 4a before its review fixes. Integrated on the reviewed 4a, the
conversion now follows the same rules as filing and the other writers.
- Names: a converted file is named as filing names a photo of its sequence (FrameNaming: the
archive's file template, the frame's context in the sequence with its camera, lens, number
and title, {name} the card's, {ext} the target's, a long name keeping its extension).
Replace through ConvertOptions.FileName; New sequence through the ingest itself
(StagedFrame.NamedAs), which numbers and names the copies in the new sequence. Names stay
unique against every file present, those leaving included, so a Replace never moves onto a
file; a test pins a stray file that keeps its bytes.
- Leases: stage A starts from the sidecar settled under the sequence's lease where the index
has it then (SequenceWriter.ReadLocked), and FrameTrash.ReplaceAsync reads the row again
under the lease, so a folder a Reorganize moved meanwhile is followed, never made again.
A Reorganize the archive waits for keeps the conversion off its sequences (pinned).
- Journals: the replace journal is settled with the others. MassRenamer steps, restores into
a sequence and sequence deletions wait for an unsettled replacement as they wait for a
restore, and so do photo deletions, whose frames version the recovery reads
(FrameTrash.EnsureReplaced); a scan settles it and reconciles nothing meanwhile; a restore
settles its sequence's replace journal first, at the folder the index has under the lease.
- The convert job tells each sequence converted or made as it completes, as a Reorganize
tells each step, so an editor open on it reads it again while the rest of the job runs.
- Desktop: JobKind.Convert gets its row in the settings' job priority list. A click on Apply
that commits the quality no longer starts the same dry run again under the click (as 4a
fixed for Reorganize).
- Panel: a dry run answered during the confirmation with the same plan no longer drops the
confirmed Apply; a different plan is shown with Admin.Convert.PlanChanged (en, it).
- Tests: TrashDialogTests.EmptyQueuesTheJobOfTheConfirmedPlanOnly waits for the command to
end before running it again (a running AsyncRelayCommand ignored the second Execute).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 2e0d1d6dcc10575734970bb9c77749f00777c859)
|
||
|
|
a1c1c21ebd |
feat(app): Convert sequences from the Archive manager and the Library, with Undo after a Replace
Owner review 2, R7 asks for mass conversion after import on the desktop too, with a choice at every run between Replace and New sequence. The desktop now uses the engine's conversion, the same plan and job as the web panel. - Convert... in the Archive manager's mass operations (the set) and the Library's mass bar (the selection of one archive; server cards are left out, two archives are refused with their own reason). The dialog has the format (JPEG, TIFF 16-bit, Linear DNG, the archival default), a JPEG's quality (1-100, 95) and the mode, which starts unchosen at every open: Apply waits for it. Each choice has a tooltip that says what becomes of the originals. - The dry run stays in the dialog and follows the choices: each sequence with its photos and sizes before and after, the photos that stay as they are with why, the sequences left as they are (busy, offline, unreadable), a summary and the free space line; a volume without the space blocks Apply. The mode does not change what converts, so choosing it plans nothing again. - Apply asks to type the number of photos a Replace replaces, then queues the convert job of exactly the plan shown; New sequence leaves the originals as they are and asks nothing. - When a Replace job ends, its toast offers Undo: for each sequence it converted, the newest Replaced trash entry made while it ran goes back (a sequence changed since gets its originals as a new sequence). Undo runs once and never from the Windows notification. - The Library and the Archive screen read the sequences again after a conversion; --capture renders archive-convert from a sample plan. - Strings in en and it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit 275469284f895fc92e2569339809e18bf59d1d6a) (cherry picked from commit 76ba41f58983275ae4b1478edd403efb11da7c79) |
||
|
|
59ee982e4d |
fix(reorganize): Apply on the first click, one offer per toast, no open dialog replaced
Review of owner review 2, phase 4a (R7): the Reorganize dialogs of the desktop and the web panel. Desktop - Clicking Apply first takes the focus from the template field, which committed it and started a dry run identical to the one on screen: Apply turned off under the click. A commit now plans only when the templates differ from the shown plan (or the last dry run failed). - The Settings toast's Reorganize… disposed whatever dialog the Archive screen had open, so a running Delete stopped without being asked. An open dialog now stays and its archive is not switched; Reorganize says it waits and opens once that dialog closes, with the archive's templates read again and every part the toasts offered meanwhile. - Each Settings toast takes its own archive's offer (one pending offer per archive), and a toast gone early (dismissed, pushed out) lets the next change of that archive raise its own toast: Toast.Closed now says when a toast leaves the screen. Web panel - The Library sends the selected ids up to a thousand. all:true is used only above that, when the selection is exactly what Select all fetched without a filter and the archive has not grown since, so a sequence unticked or added later is never reorganized; otherwise the toast asks to select again. - The preview's "before" of an untitled sequence is its old name, not the new title twice. - A dry run of the same request answering during the confirmation no longer drops the confirmed apply; a plan that really changed is shown and said (Admin.Reorganize.PlanChanged). - Enter in a template plans at once (the form never submitted on Enter). - The confirm tooltip and the module header no longer say the moves are verified: moves and renames are not hashed. Strings in en and it; the reworded key exists in no other culture. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit bed718fb5af2ef69943fd348690c689259872a34) |
||
|
|
ad72501f11 |
feat(app): Reorganize existing sequences from the Archive manager, the Library and Settings
Owner review 2, R7 asks to rename and move sequences after import on the desktop too.
The desktop now uses the engine's Reorganize, the same plan and job as the web panel.
- One Reorganize… dialog replaces Rename… and Move… in the Archive manager and Move… in
the Library. It has three templates: folders, file names and titles. Each one has a
switch and is checked as it is typed. Folders and file names start on, filled from the
archive's settings; titles start off as {title}. Renaming only titles is the Titles
switch alone.
- The dry run stays in the dialog and follows the typing. Each sequence shows its folder,
title and first file names before and after. Sequences carried along with a folder are
marked, and photos that keep their names are listed with the reason. A summary counts
the sequences that change, the files renamed and the names kept.
- Apply no longer changes the archive from the dialog. It queues the engine's move job
with exactly the plan shown (its fingerprint), so the work can be paused, resumed after
a restart and followed in Jobs. The job refuses the plan if the archive changed after
the dry run.
- The Library's Reorganize… works on the selected sequences of one archive. The Archive
screen reads the archive again when a move job ends.
- After Settings › Archive saves a new folder or file template to an archive that holds
sequences, a toast offers Reorganize… for every sequence. Its templates are the ones
changed since; a second change made while the toast is up adds to that toast instead of
opening another.
- Strings in en and it. The keys of the old Rename and Move were removed and pruned from
every translation, so the 36 other languages show the new keys as untranslated instead
of keeping "Move".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 7bbf451f737a71b768dcd70a77b998daaef851f3)
|
||
|
|
4518ffe655 |
fix(archive): settle trash journals under their leases and say why restored photos stayed
Second fix round of owner review 2, phase 3 (engine, server, desktop). - A photo never hashed whose original is missing can be deleted again: it goes into its trash record without a file and without a tombstone (nothing is left to name), stays listed until Empty erases it, and a restore keeps it with the reason "no file". FrameDeleteBlock.Unhashable now blocks only a present original that cannot be read; the API answers it as 409 photo_unreadable naming the photo, and every block has its own code and message. - Deleting a whole sequence first settles an interrupted photo deletion, restore or ingest of it (ReadLocked under its lease), so no journal or half entry travels into the sequence's trash entry; it refuses while a restore into it waits for its busy entry. - FrameTrash.Settle takes the photo entry's lease and leaves the journal for later while the entry is busy (an emptying), so it never races EraseAsync; meanwhile no other restore writes its journal over it and scans do not adopt its files. - The hashes computed for frames that stay (to find a twin of a deleted photo) go into the sidecar and index, and only a frame whose first and last 64 KiB match a deleted photo's is read whole. - A restore into a new sequence rewrites its record after each photo filed, so a crash or a database failure never leaves filed photos listed. - An upload completion no longer has a window before the commit: the ingest checks the sidecar's tombstones under the sequence lease a deletion takes (IngestRequest.RefuseRemoved), unless the upload asked to bring it back. - A restore reports each kept photo with its reason (no longer matches its record, could not be moved back, already in the sequence, had no file); the desktop line and the API message say so in en and it, and the tooltip holds the whole sentence. The desktop tells TrashMismatchException by its type. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit 1858f1f450a35fb8383ede8d80ce5f8de9b7ceac) |
||
|
|
a133306fb0 |
fix(app): show what a trash restore kept, and drop stale trash translations
The desktop trash dialog sent the "N files stayed in the trash" sentence through ShowError. ArchiveFailures.Cause has no arm for it, so after a partial restore the red line and Narrator said "A file of the archive could not be read or written." The sentence itself appeared only in the tooltip. The same thing happened to an entry none of whose files matches its record. - ArchiveDialogViewModel.ShowMessage shows a sentence that is already localized. The trash dialog uses it for kept files, and its tooltip names the files kept (six of them, then "+ N more"). - ArchiveFailures.Cause passes FrameTrash's Archive.Error.TrashMismatch sentence through. It matches the sentence's text because the engine throws a plain InvalidDataException. Any other InvalidDataException, such as a sidecar that belongs to another sequence, still reads as a file error. - Archive.Trash.List, Tooltips.Archive.Trash and Tooltips.Archive.TrashRestore changed meaning in English: they now cover photo entries as well as sequences. They are removed from the 36 cultures other than en and it, so those cultures fall back to English and `i18n check` lists the keys as untranslated instead of showing the old sequence-only wording. - The XAML comments describe what the trash dialog and its error line show now. Tests: the dialog restores a photo entry and a sequence entry and checks which rows are left. A photo entry with one tampered file shows the KeptFiles sentence and keeps its row. An entry with every file tampered shows the TrashMismatch sentence. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit 2524a11445c87d37625b01095ef7c2a84a2ee422) |
||
|
|
51782a3ada |
feat(archive): photo delete, tombstones, trash kinds and emptying, library API
Owner review 2, R6: the web panel manages the library without editing it, so the engine and the server must delete single photos safely, keep them out of sync afterwards, and let an administrator restore or finally erase the trash. - Migration 0008: frame_removals (tombstones by sequence and SHA-256, reason, replacement); the sidecar gains "removed" (omitted when empty) and frames a reserved "source"; the indexer writes the tombstones on every sync, so a rebuild keeps them, and drops a hero frame that is gone. - FrameTrash: dry run (busy, frames changed, offline, would empty), delete under the sequence lease with a write-ahead journal that the next writer undoes after a crash, files to trash/photos/<seq>-<time>/originals with a record, sidecar without the frames plus tombstones, index sync clearing analyses, thumbnails and proxies, proxies renamed to follow their frames, follow-up jobs. Restore re-hashes every file, keeps mismatches in the trash, puts the same frame records back and drops their tombstones, or files the photos into a new sequence through the ingest when theirs is gone. - Project positions on vanished photos are translated by photo and wait as pending frames, so they come back with a restore. - Trash entries have a kind (sequence, photos, replaced); emptying is a dry run with a fingerprint and a new EmptyTrash job (18) that erases exactly the planned entries, refuses a stale plan and erases replaced originals only while their replacements still hash right. - Sync honours tombstones: nothing one side deleted is offered back, local files are never deleted, replaced photos count as their replacement; the server answers an upload of a tombstoned SHA-256 as already there. - Server: sequence thumbnail, photo delete, bulk delete/retag/jobs, trash list/restore/empty endpoints with their error messages; a verify of sequences now targets their archive (POST /jobs failed before). - Desktop trash dialog lists photo entries and empties the trash after a typed confirmation through the same job. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit 35bb56690a1d69eae57153d036e1409201cd73f7) |
||
|
|
f2b58522b9 |
refactor!: rename Titano to Chronos and move CI and releases to Gitea (#6)
CI / Build and test (push) Successful in 8m14s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 7s
Release / Build, test and publish (push) Successful in 13m19s
CI / PostgreSQL 16 integration (push) Successful in 4m49s
CI / PostgreSQL 17 integration (push) Successful in 5m28s
CI / Docker image (push) Successful in 53s
Release / Server image (push) Failing after 10s
The owner renamed the product and moved the repository to the self-hosted Gitea (https://gitea.encke-hake.ts.net/BalboSoft/Chronos) for more control, and asked for Actions and a first automatic release with the server package and the Windows exe (docs/requests/2026-10-23-chronos-gitea.md). - Chronos everywhere: a byte-exact rename of contents and paths, then a per-language review of the forms the old name's ending had dictated. - Gitea instead of GitHub: the update check, licence, issue and support links read ChronosReleasesUrl; the update check takes the highest stable version, offers a pre-release build its final release and reports a repository it cannot see as a failed check. EULA, security policy and Gitea issue forms live at the repository root. - Gitea Actions for the Linux act_runner (.gitea/workflows): CI, release, nightly image and performance gates in the .NET SDK container with git checkout and the system SQLite. The release cross-compiles the Windows programs, checks their icon, version and DPI manifest, packs installers and zips, publishes the Gitea release and pushes the server image (REGISTRY_TOKEN). Windows-only tests run in an opt-in job on a Windows runner (WINDOWS_RUNNER). - New Chronos.Tools commands: zip, gitea-release, postgres-ci (replaces the docker-exec script, which Gitea's service containers do not allow; the throw-away server runs without durability) and pe-check. - Timed tests take their budget from TestTiming (CHRONOS_TEST_TIME_FACTOR, 3 on the shared runner; the weekly performance gates keep theirs). BREAKING CHANGE: programs, settings, data folders, file types, environment variables and the Docker image use the new name; nothing is migrated from Titano, which never had a release. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com> |