5b5acaf3076a7118c8f7fdcc748e4ad6fd04a6bf
4
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
a1c1c21ebd |
feat(app): Convert sequences from the Archive manager and the Library, with Undo after a Replace
Owner review 2, R7 asks for mass conversion after import on the desktop too, with a choice at every run between Replace and New sequence. The desktop now uses the engine's conversion, the same plan and job as the web panel. - Convert... in the Archive manager's mass operations (the set) and the Library's mass bar (the selection of one archive; server cards are left out, two archives are refused with their own reason). The dialog has the format (JPEG, TIFF 16-bit, Linear DNG, the archival default), a JPEG's quality (1-100, 95) and the mode, which starts unchosen at every open: Apply waits for it. Each choice has a tooltip that says what becomes of the originals. - The dry run stays in the dialog and follows the choices: each sequence with its photos and sizes before and after, the photos that stay as they are with why, the sequences left as they are (busy, offline, unreadable), a summary and the free space line; a volume without the space blocks Apply. The mode does not change what converts, so choosing it plans nothing again. - Apply asks to type the number of photos a Replace replaces, then queues the convert job of exactly the plan shown; New sequence leaves the originals as they are and asks nothing. - When a Replace job ends, its toast offers Undo: for each sequence it converted, the newest Replaced trash entry made while it ran goes back (a sequence changed since gets its originals as a new sequence). Undo runs once and never from the Windows notification. - The Library and the Archive screen read the sequences again after a conversion; --capture renders archive-convert from a sample plan. - Strings in en and it. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit 275469284f895fc92e2569339809e18bf59d1d6a) (cherry picked from commit 76ba41f58983275ae4b1478edd403efb11da7c79) |
||
|
|
ad72501f11 |
feat(app): Reorganize existing sequences from the Archive manager, the Library and Settings
Owner review 2, R7 asks to rename and move sequences after import on the desktop too.
The desktop now uses the engine's Reorganize, the same plan and job as the web panel.
- One Reorganize… dialog replaces Rename… and Move… in the Archive manager and Move… in
the Library. It has three templates: folders, file names and titles. Each one has a
switch and is checked as it is typed. Folders and file names start on, filled from the
archive's settings; titles start off as {title}. Renaming only titles is the Titles
switch alone.
- The dry run stays in the dialog and follows the typing. Each sequence shows its folder,
title and first file names before and after. Sequences carried along with a folder are
marked, and photos that keep their names are listed with the reason. A summary counts
the sequences that change, the files renamed and the names kept.
- Apply no longer changes the archive from the dialog. It queues the engine's move job
with exactly the plan shown (its fingerprint), so the work can be paused, resumed after
a restart and followed in Jobs. The job refuses the plan if the archive changed after
the dry run.
- The Library's Reorganize… works on the selected sequences of one archive. The Archive
screen reads the archive again when a move job ends.
- After Settings › Archive saves a new folder or file template to an archive that holds
sequences, a toast offers Reorganize… for every sequence. Its templates are the ones
changed since; a second change made while the toast is up adds to that toast instead of
opening another.
- Strings in en and it. The keys of the old Rename and Move were removed and pruned from
every translation, so the 36 other languages show the new keys as untranslated instead
of keeping "Move".
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
(cherry picked from commit 7bbf451f737a71b768dcd70a77b998daaef851f3)
|
||
|
|
51782a3ada |
feat(archive): photo delete, tombstones, trash kinds and emptying, library API
Owner review 2, R6: the web panel manages the library without editing it, so the engine and the server must delete single photos safely, keep them out of sync afterwards, and let an administrator restore or finally erase the trash. - Migration 0008: frame_removals (tombstones by sequence and SHA-256, reason, replacement); the sidecar gains "removed" (omitted when empty) and frames a reserved "source"; the indexer writes the tombstones on every sync, so a rebuild keeps them, and drops a hero frame that is gone. - FrameTrash: dry run (busy, frames changed, offline, would empty), delete under the sequence lease with a write-ahead journal that the next writer undoes after a crash, files to trash/photos/<seq>-<time>/originals with a record, sidecar without the frames plus tombstones, index sync clearing analyses, thumbnails and proxies, proxies renamed to follow their frames, follow-up jobs. Restore re-hashes every file, keeps mismatches in the trash, puts the same frame records back and drops their tombstones, or files the photos into a new sequence through the ingest when theirs is gone. - Project positions on vanished photos are translated by photo and wait as pending frames, so they come back with a restore. - Trash entries have a kind (sequence, photos, replaced); emptying is a dry run with a fingerprint and a new EmptyTrash job (18) that erases exactly the planned entries, refuses a stale plan and erases replaced originals only while their replacements still hash right. - Sync honours tombstones: nothing one side deleted is offered back, local files are never deleted, replaced photos count as their replacement; the server answers an upload of a tombstoned SHA-256 as already there. - Server: sequence thumbnail, photo delete, bulk delete/retag/jobs, trash list/restore/empty endpoints with their error messages; a verify of sequences now targets their archive (POST /jobs failed before). - Desktop trash dialog lists photo entries and empties the trash after a typed confirmation through the same job. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> (cherry picked from commit 35bb56690a1d69eae57153d036e1409201cd73f7) |
||
|
|
f2b58522b9 |
refactor!: rename Titano to Chronos and move CI and releases to Gitea (#6)
CI / Build and test (push) Successful in 8m14s
CI / Windows tests and installer (push) Skipped
CI / YAML check (push) Successful in 7s
Release / Build, test and publish (push) Successful in 13m19s
CI / PostgreSQL 16 integration (push) Successful in 4m49s
CI / PostgreSQL 17 integration (push) Successful in 5m28s
CI / Docker image (push) Successful in 53s
Release / Server image (push) Failing after 10s
The owner renamed the product and moved the repository to the self-hosted Gitea (https://gitea.encke-hake.ts.net/BalboSoft/Chronos) for more control, and asked for Actions and a first automatic release with the server package and the Windows exe (docs/requests/2026-10-23-chronos-gitea.md). - Chronos everywhere: a byte-exact rename of contents and paths, then a per-language review of the forms the old name's ending had dictated. - Gitea instead of GitHub: the update check, licence, issue and support links read ChronosReleasesUrl; the update check takes the highest stable version, offers a pre-release build its final release and reports a repository it cannot see as a failed check. EULA, security policy and Gitea issue forms live at the repository root. - Gitea Actions for the Linux act_runner (.gitea/workflows): CI, release, nightly image and performance gates in the .NET SDK container with git checkout and the system SQLite. The release cross-compiles the Windows programs, checks their icon, version and DPI manifest, packs installers and zips, publishes the Gitea release and pushes the server image (REGISTRY_TOKEN). Windows-only tests run in an opt-in job on a Windows runner (WINDOWS_RUNNER). - New Chronos.Tools commands: zip, gitea-release, postgres-ci (replaces the docker-exec script, which Gitea's service containers do not allow; the throw-away server runs without durability) and pe-check. - Timed tests take their budget from TestTiming (CHRONOS_TEST_TIME_FACTOR, 3 on the shared runner; the weekly performance gates keep theirs). BREAKING CHANGE: programs, settings, data folders, file types, environment variables and the Docker image use the new name; nothing is migrated from Titano, which never had a release. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com> Co-authored-by: Alberto Balbo <alberto.balbo.96@gmail.com> |